pxe boot, advanced menu with login isn't working

[Claude Girard]

Can you verify in fog database, GLobal settings table, settingkey FOG_PXE_ADVANCED, and see if these lines are the same in database ?

Maybe same problem than:
https://forums.fogproject.org/topic/5752/new-client-some-snapins-doesn-t-work-ok-with-legacy-client/15

where && become &\amp;

I remember that advanced menu didn’t work and host booted on hard drive

[Tom Elliott]

@Scott-B where are the \r\n lines doing? Or was this file edited/opened by Windows?

[Claude Girard]

@Tom-Elliott said:

@Scott-B where are the \r\n lines doing? Or was this file edited/opened by Windows?

Hi Tom

I think this is because of escaped characters again.
May I open a specific thread for these problems ?

I have these \r\n for example in image description when I write this text on several lines, with return between each one.

I saw escaped problems in:
snapins fields
PXE menu
host or image description

Maybe could be the same in other fields

And what is problematic:
french accents é, à , ê, etc …
antislashes
&
Line feed and/or carriage return
Maybe more …

Sometimes I can see that in database, but not in FOG interface (for example \r\n isn’t visible in fog interface but is in database)
Sometimes I can see in both (for example for french accents)

[Tom Elliott]

I’ve updated the files now and i now replace the \r\n lines with the simple \n which will print as a “new line”.

I also an decoding the html entities now to ensure the & is displayed as just the & symbol (or any of the encoded items are displayed as their relative symbol).

[Scott B]

@Tom-Elliott said:

@Scott-B where are the \r\n lines doing? Or was this file edited/opened by Windows?

They show up in place of spaces after making a change and then going back into the menu item. I get the thing in the host description when doing an inventory extract as well. What I put into each of my added it menu items should show up below. Each one is their own menu choice item.

:sysrescue
initrd http://${fog-ip}/${fog-webroot}/isos/systemrescuecd.iso
chain memdisk iso raw ||
boot

:ultimate
initrd http://${fog-ip}/${fog-webroot}/isos/ubcd535.iso
chain memdisk iso raw ||
boot

:DBAN
kernel ${boot_url}/fog/isos/dban/dban.bzi nuke="dwipe --autonuke" silent vga=785
boot

:Hirens
initrd http://${fog-ip}/${fog-webroot}/isos/hirens.iso
chain memdisk iso raw ||
boot

[Tom Elliott]

I saw it and fixed in in the current trunk.

[Scott B]

@Tom-Elliott said:

I saw it and fixed in in the current trunk.

SVN: 5441

I get the login under the advanced menu, but it still just boots the first drive. Is my advanced login setup wrong somehow (I thought it was default)? Looks different to the one posted by @CLAUDE GIRARD in the link he posted.

login
params
param mac0 ${net0/mac}
param arch ${arch}
param username ${username}
param password ${password}
param advLog 1
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme

[Tom Elliott]

@Scott-B Advanced login requires you to login first. Try unchecking the advanced login checkbox and save, and see if that helps you out.

[Scott B]

@Tom-Elliott said:

@Scott-B Advanced login requires you to login first. Try unchecking the advanced login checkbox and save, and see if that helps you out.

The advanced checkbox here? If so, still there.

[Tom Elliott]

@Scott-B Did you create your own advanced login custom meny?

[Scott B]

@Tom-Elliott

I did not (knowingly) make a custome advanced menu login. I did make an entry for each ISO.

[Tom Elliott]

@Scott-B It’s becasue the link is set to All hosts for the “show with”.

Please change this back to “Advanced Login Required” and you should see the proper advanced menu work.

[Scott B]

@Tom-Elliott said:

@Scott-B It’s becasue the link is set to All hosts for the “show with”.

Please change this back to “Advanced Login Required” and you should see the proper advanced menu work.

Same result.

[Tom Elliott]

@Scott-B What is the same result?

[Scott B]

@Tom-Elliott said:

@Scott-B What is the same result?

After checking box for “Advanced Login Required” > saving > booting > choosing advanced menu with login > entering login > loads default.php and advanced.php > then just moves on to the local hard disk. If there is an error between loading advanced.php and booting the loca disk, I can’t see it.

[Tom Elliott]

@Scott-B right but you don’t have anything in the advanced items. There is the login and it is working fine. But the advanced menu is its own configuration setting that you put your needs in.

[Scott B]

@Tom-Elliott said:

@Scott-B right but you don’t have anything in the advanced items. There is the login and it is working fine. But the advanced menu is its own configuration setting that you put your needs in.

Ah… okay. I thought that was just called from fog.advancedlogin.