HP Stream 11 pro

[drc0nc]

@Sebastian-Roth awesome, will try today and will let you know!

[drc0nc]

@Sebastian-Roth Holy cow! that let me boot past init.xz!!! Now I’m getting the error Cannot find HDD on system when running host reg

[drc0nc]

[drc0nc]

i followed this also https://wiki.fogproject.org/wiki/index.php/BIOS_and_UEFI_Co-Existence

[Tom Elliott]

@drc0nc oh damn it.

Let me guess, it isn’t working at all and you’re running kernel 4.3.0?

[drc0nc]

@Tom-Elliott lol yea, latest svn and kernel 4.3.0 I’m not sure as to why it’s not seeing a HDD
btw thanks for all the help so far and have a good veterans day Tom, I’m also a vet

[Tom Elliott]

Can you change the Kernel out to the 4.2.3 variant?

I’ll recompile the 4.3.0 kernel so the RPMBD issue is fixed for the mmc devices.

[drc0nc]

@Tom-Elliott will do, same problem… (why is the image upside down lol?)

[drc0nc]

update, this is what it shows if I ignore

[Sebastian Roth]

Looks pretty good to me. To make this work you need to set “Host Primary Disk” to ‘/dev/mmcblk0’ (without the quotes!) in the host settings of this particular host. Please give it a try and see if you can upload an image…

[drc0nc]

@Sebastian-Roth YES! It’s currently pulling an image, I had to set it to do a multiple partition disk non re-sizable… I’ll update you guys if I can deploy it after it completes the pull

Thanks again to all that helped!

[drc0nc]

I got an image to successfully deploy! Now about 60 more to go!

[Wayne Workman]

@drc0nc Can you please let us know exactly what boot file you’re using, what kernel version, what kernel arguments, and what you put in the host disk fields? Basically anything specific to this device.

We need to put this information into the WiKi under the working hardware lists for others to benefit from.

[drc0nc]

@Wayne-Workman Alright, here’s the specs and I hope it will help people with their HP’s
Fog version: svn 5293
Boot file:ipxe.efi
Kernel: 4.2.3 (4.3.0 wasn’t working at the time for this specific problem)
Kernel arg: has_usb_nic=1
Host disk: /dev/mmcblk0 (this was important, fog wasn’t recognizing the HDD unless this was valid.)
Using an Ethernet to usb adapter that has an ASIX AX88772B in it.

[Wayne Workman]

hash tagging this so I can find it later for addition to the wiki.
EDIT: Added

[Wayne Workman]

Added to the WkKi’s working hardware list here: https://wiki.fogproject.org/wiki/index.php/WorkingDevices

[drc0nc]

@Tom-Elliott @Wayne-Workman @Sebastian-Roth

Hey guys. Sorry to bug but as I continue to tackle these HP streams I ran into another problem that popped up. The specs are the same, I’m still running svn 5293 (had to reinstall fog because i had a HHD totally fail)
same boot ipxe.efi
same kernel 4.2.3
same kernel arg and host disk.
I can pull images just fine using undionly.kkpxe on my lenovos

yet the streams just wont pull an image (sorry for potato quality)

[drc0nc]

For some reason when I changed the image to a RAW image (4) it decided to pull it.
I’ve tried option (2) and (3) and it didn’t work.
In the past I had it set up to use Multiple Partition Image Single Disk-(2) yet its crapping out on me using that option.
I guess maybe some clarification is all I’m asking for at this point.

[Wayne Workman]

Is it just this one or are others doing it too?

[drc0nc]

@Wayne-Workman Haven’t tried other ones yet. The way I have the HP’s working is that they use the MAC of the usb adapters. Unfortunately I only have 4 adapters soo they are just simple hosts with the valid arguments and such. When this image is done being pulled I’ll try to use option (2) on it and see what happens. I can try another adapter on a different HP or the same, doesn’t matter.
BTW I want to upgrade trunk but i’m afraid that I’ll lose functionality for the HP’s.
In the other school building I keep trunk updated and it runs awesome! but at this particular building I’m keeping fog where it is for the HP’s. at the other school building I don’t need it for the HP’s.