Fog Doesn't copy all Partitions

[Nox245]

@Uncle-Frank
heres what i got from the debug : http://postimg.org/image/4s2mo8o13/

[Tom Elliott]

@Nox245 the problem is your image. First the recovery partition is a dell utility, and while I believe this is fixed in trunk I cannot say for 100% as I don’t typically create my images using the default layout from the manufacturer.

That aside I believe you specific problem lies with the sector starting at 63. 1.2.0 was a fairly stable release but it missed the sector layout by always trying to start everything at 2048. Maybe you could upgrade to trunk and try again? I think it may work, but it is no guarantee.

[Tom Elliott]

@Nox245 can you also get the output of fogpartinfo --list-devices and fogpartinfo --list-parts /dev/sda?

[Sebastian Roth]

@Tom-Elliott He already posted a picture with --list-parts. Looks good. I am pretty sure that --list-devices will be fine too then.

[Tom Elliott]

@Uncle-Frank gotcha I see it now. Didn’t realize it through the text.

[Nox245]

@Uncle-Frank

–list-devices only shows /dev/sda/

how do i upgrade to trunk ?

BTW unfortunately i do need the dell recovery in my image

[Sebastian Roth]

https://wiki.fogproject.org/wiki/index.php/Upgrade_to_trunk

[Nox245]

so ive upgraded fog to trunk
created the image and the host and everything
started the task, it copied 2 partitions 100% but on the third partition it stoped around 58% and sudenly died
and shown on the screen that : http://postimg.org/image/4bl20riq7/
thats how the task progress looks like : http://postimg.org/image/4mjxwjlgf/
and really … its in a midle of the last partition …

[Sebastian Roth]

Interesting. This definitely should not happen in the middle of partclone running. Did you actually see partclone closing in the middle of reading or do you guess it did because it looks like it in the web interface?

Please follow this guide to make sure FTP is working properly: https://wiki.fogproject.org/wiki/index.php/Troubleshoot_FTP (especially the section on passwords)

[Wayne Workman]

@Nox245 Is there enough free space on the Fog Sever? df -h

CentOS defaults the / directory to have 50GB.

[Nox245]

so ive seen the whole process this time and it actualy gets to 100% and it has a complete image of the disk,
it says its done uploading the image bot i dont really have it in the server here’s a pic: http://postimg.org/image/6xmtu1izr/
@Wayne-Workman
yeah it has enough space for the image, i got 67gb free space on the server and fog sees it. the whole image is about 52gb.
@Uncle-Frank
ive changed the passwords in /opt/fog/.fogsettings and in Web Interface -> FOG Configuration -> FOG Settings -> TFTP Server -> FOG_TFTP_FTP_USERNAME & FOG_TFTP_FTP_PASSWORD
all the passwords are the same and the error still shows like its trying to use some random password… i rebooted fog before trying the imaging again.

[Tom Elliott]

@Nox245 said:

so ive seen the whole process this time and it actualy gets to 100% and it has a complete image of the disk,
it says its done uploading the image bot i dont really have it in the server here’s a pic: http://postimg.org/image/6xmtu1izr/
@Wayne-Workman
yeah it has enough space for the image, i got 67gb free space on the server and fog sees it. the whole image is about 52gb.
@Uncle-Frank
ive changed the passwords in /opt/fog/.fogsettings and in Web Interface -> FOG Configuration -> FOG Settings -> TFTP Server -> FOG_TFTP_FTP_USERNAME & FOG_TFTP_FTP_PASSWORD
all the passwords are the same and the error still shows like its trying to use some random password… i rebooted fog before trying the imaging again.

The only password that fog uses for imaging is the one set to the storage node. Goto storage management, select the relevant master node and look down the bottom of the screen. Ensure the proper username and password match your nodes credentials.

[Wayne Workman]

@Nox245 Tom is right, this is a FTP credentials issue most likely. NFS is used to upload the image to /images/dev and then FTP is used to move the image (once uploaded) from /images/dev to /images. the username/pass used for this are set in the storage node’s settings area in the web interface. You must also have a matching user account on the actual linux box with FTP permission. The installer does all of these things for you, but changing things can goof them.

That troubleshooting ftp article posted by @Sebastian-Roth below gives steps on how to correct this.

[Nox245]

ok so ive changed all the passwords on the server to 1 password and now it is all working
thank you all very much and have a great day