Windows 8.1 "Dirty Bit" in UEFI

[MRLINUX]

@Wayne-Workman
Thank you for the Article.
A few months ago we bought dell laptops and I was using WDS for deployment and it worked perfect with HP and Win7 computers.
When I deployed win8.1 to these DELL machines I had to stop using WDS 2012 R2.(endless errors) Deleted WDS COMPLETELY OFF the network.
Since then IM leveraging Open source technology on levels of DEVOPS.
My point is now I have an answer for my UEFI deployment issues. Thank you once again

[ch3i]

@Wayne-Workman said:

@ch3i Not yet, thank you for reminding me. I’ll try to do it today. I actually need to.

Hi @Wayne-Workman, I’ve tested it on a Windows 8.1 with “Fast Startup”, it’s functional. Could-you test it to confirm my result ? If it’s OK, it would be interesting to add it to FOG upload process.

[Wayne Workman]

@ch3i Trying it now.

[Wayne Workman]

@ch3i Is it just me, or does the “Fast Startup” checkbox vanish after it’s disabled for others too?

[Wayne Workman]

@Wayne-Workman said:

@ch3i Is it just me, or does the “Fast Startup” checkbox vanish after it’s disabled for others too?

So, you must run powercfg.exe -H on for the “Fast Startup” option to even show up.

[Wayne Workman]

This is with Fast Startup and Hibernation turned on.

[ch3i]

@Wayne-Workman said:

This is with Fast Startup and Hibernation turned on.

I’ll try that : ntfs-3g -o remove_hiberfile /dev/sdaX /tmp/mount_point to remove the hibernate file.

[Wayne Workman]

@ch3i

mkdir /mnt/tmp
ntfs-3g -o remove_hiberfile /dev/sda4 /mnt/tmp
umount /mnt/tmp
ntfsfix /dev/sda4

That says it succeeded, but then NFS failed to mount during the fog command… gah… trying again.

[Wayne Workman]

@Wayne-Workman said:

@ch3i

mkdir /mnt/tmp
ntfs-3g -o remove_hiberfile /dev/sda4 /mnt/tmp
umount /mnt/tmp
ntfsfix /dev/sda4

That says it succeeded, but then NFS failed to mount during the fog command… gah… trying again.

I think this has to be done for all the partitions for it to work right… Because now I’m getting errors about mounting /dev/sda1 during the FOG command. I’m testing now.

[ch3i]

@Wayne-Workman Hi, There is a function in func.sh (in the init) to remove pagefile and hiberfile :

# $1 is the device name of the windows system partition
removePageFile() {
    local part="$1";
    local fstype="";
    if [ "$part" != "" ]; then
        fstype=`fsTypeSetting $part`
    fi
    if [ "$fstype" != "ntfs" ]; then
        echo " * No ntfs file system on ($part) to remove page file"
        debugPause;
    elif [[ "$osid" == +([1-2]|[5-7]|9|50) ]]; then
        if [ "$ignorepg" == "1" ]; then
            dots "Mounting partition ($part)";
            mkdir /ntfs &>/dev/null;
            ntfs-3g -o force,rw $part /ntfs;
            if [ "$?" == "0" ]; then
                echo "Done";
                debugPause;
                dots "Removing page file";
                if [ -f "/ntfs/pagefile.sys" ]; then
                    rm -f "/ntfs/pagefile.sys" >/dev/null 2>&1;
                    echo "Done";
                else
                    echo "No pagefile found";
                fi
                debugPause;
                dots "Removing hibernate file";
                if [ -f "/ntfs/hiberfil.sys" ]; then
                    rm -f "/ntfs/hiberfil.sys" >/dev/null 2>&1;
                    echo "Done";
                else
                    echo "No hibernate found";
                fi
                resetFlag "$part";
                umount /ntfs;
            else
                echo "Failed";
            fi
            debugPause;
        fi
    fi
}

And ntfsfix too :

# $1 is the part
resetFlag() {
    if [ -n "$1" ]; then
        fstype=`blkid -po udev $1 | awk -F= /FS_TYPE=/'{print $2}'`;
        if [ "$fstype" == "ntfs" ]; then
            dots "Clearing ntfs flag";
            ntfsfix -b -d $1 &>/dev/null;
            echo "Done";
            debugPause;
        fi
    fi
}

Not sure if the two functions are used during upload process, @Developers ?

[Sebastian Roth]

As far as I can see in the fog.upload script those two functions are only used with image type set to resizable.

[ch3i]

@Uncle-Frank said:

As far as I can see in the fog.upload script those two functions are only used with image type set to resizable.

I think we have to enable it on each upload resizable or not.

[Wayne Workman]

@ch3i How would I use those functions from CLI?

I suppose I can make a bash script during debug and call those functions to run, then run ntfsfix on all the partitions in the same script.

[ch3i]

@Wayne-Workman said:

@ch3i How would I use those functions from CLI?

I suppose I can make a bash script during debug and call those functions to run, then run ntfsfix on all the partitions in the same script.

You can modify the fog.upload to call these scripts before uploading.

[Wayne Workman]

@ch3i said:

@Wayne-Workman Hi, There is a function in func.sh (in the init) to remove pagefile and hiberfile :

# $1 is the device name of the windows system partition
removePageFile() {
    local part="$1";
    local fstype="";
    if [ "$part" != "" ]; then
        fstype=`fsTypeSetting $part`
    fi
    if [ "$fstype" != "ntfs" ]; then
        echo " * No ntfs file system on ($part) to remove page file"
        debugPause;
    elif [[ "$osid" == +([1-2]|[5-7]|9|50) ]]; then
        if [ "$ignorepg" == "1" ]; then
            dots "Mounting partition ($part)";
            mkdir /ntfs &>/dev/null;
            ntfs-3g -o force,rw $part /ntfs;
            if [ "$?" == "0" ]; then
                echo "Done";
                debugPause;
                dots "Removing page file";
                if [ -f "/ntfs/pagefile.sys" ]; then
                    rm -f "/ntfs/pagefile.sys" >/dev/null 2>&1;
                    echo "Done";
                else
                    echo "No pagefile found";
                fi
                debugPause;
                dots "Removing hibernate file";
                if [ -f "/ntfs/hiberfil.sys" ]; then
                    rm -f "/ntfs/hiberfil.sys" >/dev/null 2>&1;
                    echo "Done";
                else
                    echo "No hibernate found";
                fi
                resetFlag "$part";
                umount /ntfs;
            else
                echo "Failed";
            fi
            debugPause;
        fi
    fi
}

And ntfsfix too :

# $1 is the part
resetFlag() {
    if [ -n "$1" ]; then
        fstype=`blkid -po udev $1 | awk -F= /FS_TYPE=/'{print $2}'`;
        if [ "$fstype" == "ntfs" ]; then
            dots "Clearing ntfs flag";
            ntfsfix -b -d $1 &>/dev/null;
            echo "Done";
            debugPause;
        fi
    fi
}

Not sure if the two functions are used during upload process, @Developers ?

@Uncle-Frank stated that these two functions are called for resizable image types. Resizeable is the image type I’m using for this…

So that means these two functions are either running and failing on /dev/sda4, or not running at all, or not running at the correct time.

[Sebastian Roth]

We are talking about upload, right? See here yourself: https://github.com/FOGProject/fogproject/blob/c796b1ab68e2215ea60e6ef33c732bd5a475501e/src/buildroot/package/fog/scripts/bin/fog.upload#L120 (removePageFile which is called before schrinking)
and
https://github.com/FOGProject/fogproject/blob/c796b1ab68e2215ea60e6ef33c732bd5a475501e/src/buildroot/package/fog/scripts/bin/fog.upload#L174 (resetFlag which is called aftershrinking)

[Wayne Workman]

Old thread - new news.

Had this error show up when uploading from an EliteBook 8730w with Win10 on it.

While I was digging up the commands in the wiki to fix it, when the laptop rebooted on it’s own (due to error), it began uploading!

How strange?