Diving into CentOS 7

sudburr

Got it. Thx.

sudburr

Interesting. My CentOS installation is less than half the size of Debian.

2.3GiB vs 5.3GiB
P.S. I got it even further down to 1.66GB, but then aha. I switched from XFS file system to ext4 and it’s now 5.5GB.

Wayne Workman

@sudburr said:

Interesting. My CentOS installation is less than half the size of Debian.

2.3GiB vs 5.3GiB

… I’ve been advocating for Fedora / CentOS for a long time… lol

sudburr

I’ve run into my first problem with CentOS that I haven’t found a direct solution for yet. It’s a difference in syntax for ‘git’ compared to Ubuntu/Debian.

Git in Ubuntu/Debian allows me to direct clone and pull to a specific path (/opt/trunkgit) using:

git -C /opt/trunkgit clone https://github.com/FOGProject/fogproject.git /opt/trunkgit
git -C /opt/trunkgit pull

Git in CentOS doesn’t have a -C . For now I’m making do with

cd /opt/trunkgit
git clone https://github.com/FOGProject/fogproject.git

… but, git then creates the directory /opt/trunkgit/fogproject and downloads to that. For updating I must then:

cd /opt/trunkgit/fogproject
git pull

I like my scripts to have as few differences as possible between OSes so I’m looking for a way for git to perform the same in all three.

Pausing to reflect on what I just wrote … I realize I needed to think in the other direction. This works:

if [ ! -d /opt/trunkgit ]; then
mkdir /opt/trunkgit
fi
if [ ! -d /opt/trunkgit/fogproject ]; then
cd /opt/trunkgit
git clone https://github.com/FOGProject/fogproject.git
else
cd /opt/trunkgit/fogproject
git pull
fi
if [ ! -d /opt/trunksvn ]; then
mkdir /opt/trunksvn
fi
if [ ! -d /opt/trunksvn/fogproject ]; then
mkdir /opt/trunksvn/fogproject
fi
svn co https://svn.code.sf.net/p/freeghost/code/trunk /opt/trunksvn/fogproject

My brain is cooked… I spent too much time in the sun at a Canine Agility competition today.

sudburr

This leads me to my next task.

How to detect the OS variant. Namely Ubuntu, Debian or CentOS An if then idea.

sudburr

Looks like this might do it:

if [ -f /etc/debian_version ]; then
fi

if [ -f /etc/centos-release ]; then
fi

sudburr

Okay, next problem. I can’t get SELINUX to not start.

sed -i "s/=enforcing/=disabled/g" /etc/sysconfig/selinux
setenforce 0

… is not doing it. After reboot, sestatus shows SELINUX is still enabled.

sudburr

I see my mistake now. Though there is a /etc/sysconfig/selinux , I wanted to edit /etc/selinux/config .

To cover my bases I’m editing both. I suspect that the first is generated by the second:

setenforce 0
sed -i "s/=enforcing/=disabled/g" /etc/sysconfig/selinux
sed -i "s/=enforcing/=disabled/g" /etc/selinux/config

… and checking … yep, that did the trick.

Now for an actual Fog install.

Wayne Workman

@sudburr lol you’re so hardcore.

What’s wrong with using Vi and just opening the file and changing the “enforcing” to “disabled” ?? lol

and for the record, /etc/selinux/config is the only one you need to edit.

There is also a “permissive” mode for SELINUX. something to think about.

sudburr

Manually using VI is slow.

It’s far easier to simply copy and paste the command code in a single click.

Considering that disabling SELINUX is from your horses mouth, what’s the point of permissive?

Tom Elliott

VI can do copy and paste, for what it’s worth.

Tom Elliott

@sudburr And you can use sed statements in vi as well to change only the lines you need.

For example, instead of sed -i, in VI/VIM you would type:

:%s/=enforcing/=disabled/g

Tom Elliott

And to help a bit more in the understanding of SELinux and it’s modes: https://wiki.gentoo.org/wiki/SELinux/Tutorials/Permissive_versus_enforcing

Wayne Workman

@sudburr said:

Considering that disabling SELINUX is from your horses mouth, what’s the point of permissive?

For myself and many other people who have came to the forums in distress, FOG doesn’t fully work with SELinux in “enforcing” mode. However, it’s one of my goals to get fog to work with it turned on fully.

sudburr

Well I have FOG running happily on CentOS 7.1 now.

As much as enjoy Debian 8.2 over Ubuntu 14/15 now, I dare say I may prefer CentOS 7.1 now.

sudburr

As I’ve re-edited above, it appears the file system footprint was a result of installing CentOS 7 using the default Partition Scheme LVM and the file system, which happens to be XFS.

Switching the install to use Standard Partitions and the ext4 File system for sda1/2/3 results in a fs footprint on par with Debian at 5.5GB. And by footprint I mean .vhdx file size.

sudburr

Success on all fronts.

I have successfully created a generalized virtual server running CentOS 7.1 with FOG Build 4820. I can dump an image of it onto any hardware we use, mobile, desktop or virtual and it works exactly as desired.

I like it so much I’m making it my new standard.

There were some new hoops to jump through, but the CentOS community and online documentation provided solutions using native commands and features.

I even succeeded with no issues whatsoever in converting my vm development fog from Debian8.2 to CentOS7.1 in about 15 minutes.

I love slaying dragons.

Diving into CentOS 7

211

11.7k

17.1k

154.7k