Partclone bitmap free count err

[ch3i]

Hi,

I’ve a problem with an upload, I’ve a multiboot image (win7/ubuntu14), and I have that error at upload.

To solved it I check the /dev/sda3 (the partition which have the error in partclone : ubuntu) and correct the problem. But after that parclone won’t upload the partitions /dev/sda1 and sda2 (100 mb reserved and windows partitions)…

Below the installation :

/dev/sda1			100mb Windows Reserved
/dev/sda2			Windows OS
/dev/sda3			Ubuntu OS /
/dev/sda4			Extended Partition
	/dev/sda5		swap linux
	/dev/sda6		/data linux (free for use)
	/dev/sda7		d: Windows (free for use)

The image folder :

-rwxrwxrwx 1 root root           0 sept.  4 17:48 d1.has_grub
-rwxrwxrwx 1 root root     1048576 sept.  4 17:48 d1.mbr
-rwxrwxrwx 1 root root          47 sept.  4 18:11 d1.original.swapuuids
-rwxrwxrwx 1 root root     8446231 sept.  4 17:48 d1p1.img
-rwxrwxrwx 1 root root 16551042857 sept.  4 18:05 d1p2.img
-rwxrwxrwx 1 root root          20 sept.  4 18:05 d1p3.img
-rwxrwxrwx 1 root root         512 sept.  4 18:11 d1p4.ebr
-rwxrwxrwx 1 root root         512 sept.  4 17:48 d1p5.ebr
-rwxrwxrwx 1 root root         512 sept.  4 17:48 d1p6.ebr
-rwxrwxrwx 1 root root    29789683 sept.  4 18:11 d1p6.img
-rwxrwxrwx 1 root root         512 sept.  4 17:48 d1p7.ebr
-rwxrwxrwx 1 root root      442202 sept.  4 18:11 d1p7.img
-rwxrwxrwx 1 root root         483 sept.  4 17:48 d1.partitions

And the d1.partitions :

label: dos
label-id: 0x22e01a61
device: /dev/sda
unit: sectors

/dev/sda1 : start=        2048, size=      677888, type=7, bootable
/dev/sda2 : start=      679936, size=    92129280, type=7
/dev/sda3 : start=    92825600, size=    94035968, type=83
/dev/sda4 : start=   186861568, size=   125716480, type=5
/dev/sda5 : start=   186863616, size=     8388608, type=82
/dev/sda6 : start=   195254272, size=    76285952, type=83
/dev/sda7 : start=   271542272, size=    41035776, type=7

To be sure that both partitions do not overlap, I also tried add free space between both.
I’ve 20 labs with that image (that’s is very hard to install - no time to create new image) and 3 days to solve my problem.

I’ve seen that partclone have a method to correct that : -fsck-src-part-y

Help !

[Wayne Workman]

@ch3i

Take an image using RAW ??

You have a really tight window here… I don’t know what else to suggest besides RAW.

[ch3i]

@Wayne-Workman

To solve my problem I had to correct the /dev/sda3 before upload in debug task :
1/ Add free space before and after partition (2Mo for each)

/dev/sda1			100mb Windows Reserved
/dev/sda2			Windows OS
free space 			(2mo)
/dev/sda3			Ubuntu OS /
free space			(2mo)
/dev/sda4			Extended Partition
	/dev/sda5		swap linux
	/dev/sda6		/data linux (free for use)
	/dev/sda7		d: Windows (free for use)

2/ Launch task from Web UI (upload in Debug)
3/ Start computer and boot PXE
4/ Check partition using fsck.ext4 /dev/sda3
5/ Run the job with the command fog
Note : I have to do it before each upload

I’ve tested before without free space after : no success, now it’s OK.

I use that method because I have not the time to make a fresh install of my Master. I’ll reinstall it after the rush

[Wayne Workman]

@ch3i said:

@Wayne-Workman

To solve my problem I had to correct the /dev/sda3 before upload in debug task :
1/ Add free space before and after partition (2Mo for each)

/dev/sda1			100mb Windows Reserved
/dev/sda2			Windows OS
free space 			(2mo)
/dev/sda3			Ubuntu OS /
free space			(2mo)
/dev/sda4			Extended Partition
	/dev/sda5		swap linux
	/dev/sda6		/data linux (free for use)
	/dev/sda7		d: Windows (free for use)

Glad you got it solved. How did you add free space between the partitions? I’m curious.

[ch3i]

@Wayne-Workman said:

@ch3i said:

@Wayne-Workman

To solve my problem I had to correct the /dev/sda3 before upload in debug task :
1/ Add free space before and after partition (2Mo for each)

/dev/sda1			100mb Windows Reserved
/dev/sda2			Windows OS
free space 			(2mo)
/dev/sda3			Ubuntu OS /
free space			(2mo)
/dev/sda4			Extended Partition
	/dev/sda5		swap linux
	/dev/sda6		/data linux (free for use)
	/dev/sda7		d: Windows (free for use)

Glad you got it solved. How did you add free space between the partitions? I’m curious.

Parted