PXE boot menu then black screen
-
Seemed like from all the installs no one had this many problems getting pxe to boot. So when I register and schedule the host to image it gives me that bzimage error. But all the new computers will register fine but imaging won’t happen because of this error.
-
have you verified that the bzImage, bzImage32, init.xz, and init_32.xz files downloaded successfully?
-
how are you registering your hosts? from the pxe boot menu, or by entering the mac address into the web gui?
-
I have registered host from PXE and the GUI. I uploaded a fresh image into the server. It see’s that image and you can see it in the GUI and command line. I am getting a file issue it happens to quick when I image I get all the way through to where it picks a node.
I get this
*Using Hard disk: /dev/sda
*Erasing Current MBR/GPI Tables…Done
awk: fatal: cannot open file '/images/WIN732bbaseimage/d1.minimum.par
r reading (No such file or directory)
Done -
Then it just says task complete and reboots. Never images anything
-
are you getting bzimage errors, or does it go into the imaging task and fail out? those are entirely different things
-
no the bzimage was only an issue when I perform a registration and select yes to image I get the bzimage error. The above error I just posted is when I try to image from fog on a good image or so I thought. It fails out of the image task at that point then says it completed and restarts.
-
sounds like Tom just released a new version that’s targeted at problematic Lenovos [url]http://fogproject.org/forum/threads/hardware-currently-working-with-fog-v1-x-x.10685/page-4#post-47392[/url]
-
saltlife3122, are you behind a proxy?
-
no there is no proxy
-
OK that svn update seems to have fixed me getting to image. The image went through but I get the blue screen of death after it starts windows when its done. Maybe I just have a bad image. I still get that same error that I listed above except now with new 3396 it goes through and images. I am re uploading an image from an actual computer this time, instead of a VM see if I get a good image that way.
-
Also When I do a quick image and select the OS it goes to a black blank screen with a flashing cursor. When I reboot to PXE I get a bzimage error. I have to go into the GUI and delete the task out. If i set an active task in the GUI to reimage it I get the same bzimage error. This is all so confusing and a mess. Fix one issue to bounce into another.
-
For the record, I run fog inside Hyper-V, and the only kind of image I upload is from physical machines.
I use undionly.kkpxe because Lenovo desktops have issues.
For some Lenovos, I’ve had success with kernel 3.18.3 x86_x64, and I use the trunk version of fog (the latest revisions).
What are the exact models of Lenovos you’re using? Have you checked our “Working Hardware” and “Problematic Hardware” lists?
-
We have M73, M81 etc desktops. Our laptops are from the B560/B590 all the way to E550’s.
So the .kkpx is better for you on lenovos than the .kpxe?
Do I need to revert my kernel from 4.0.2 all the way back to 3.18.3?
-
They are just suggestions, things I’ve had luck with for Lenovos.
Changing your boot file and changing your kernel is really easy to do. (easier in trunk)
-
Thinkstation S20 works fine with undionly.kkpxe and AHCI set in the bios. Work with last svn up and down.
-
Woot woot
-
sweet that kkpxe did the trick somehow. I am getting everything connected and running now thanks for the help and good work with fog trunk versions