Sysprep with out OOBE
-
Running 1.2.0 on latest version of fedora. If its a newer svn and easier Im willing
-
I’m a fan there can be teething issues but a lot of improvements.
[url]http://www.fogproject.org/wiki/index.php/SVN[/url] -
I don’t use sys-prep or fog-prep. And I’ve had zero problems. I maintain an image for each model in my building.
Two years ago, I ran into an issue with many machines having the same GUID, and this made my KMS server not work so well. Turns out, it needs like 5 unique requests (for MS Office) before it starts activating anything. I found a program on the net that generates fake requests. After I ran that, everything was fine.
-
Ok I just installed the update. So if I understand it correctly I should not have to do sysprep correct? What about Fogprep?
-
You don’t “Have to” do anything special to pull an image with FOG. (edit in the new svn versions.)
Sys-Prep is to make an image that is compatible with many different models of computers… and for including drivers for those models, and running post-imaging tasks.
Without it, you will need to maintain an image for each model, like I do. I feel it’s simpler, and I’ve got the storage space for it.
-
Well I just tried to upload an image to the server and it gets to /init.xz… ok and just sits there and does nothing. So far it’s been 15 minutes. I tried updating the kernels with a recent one and one from a few weeks ago but the older one causes a kernel panic. Suggestions Joseph?
-
re-update.
Others had issues with this recently, the new update fixed it.
-
I think you have an issue on the server side try this part of the wiki or maybe simply a reboot of the server.
[url]http://fogproject.org/wiki/index.php?title=Unable_to_connect_to_TFTP[/url]Fedora 20/21
status/enable/restart
systemctl status xinetd.service
systemctl enable xinetd.service
systemctl restart xinetd.serviceor more likley what Wayne posted
-
Thanks I will try this. Wayne to which update are you referring? I used the link to the instructions that Joseph gave to update the server.
-
This one if running Ubuntu
cd svn
sudo svn checkout [url]https://svn.code.sf.net/p/freeghost/code/trunk[/url]
Install It!
cd ~/svn/trunk/binsudo ./installfog.sh
-
Running fedora.
-
[SIZE=4][B][FONT=sans-serif][COLOR=#000000]Download the package[/COLOR][/FONT][/B][/SIZE]
[COLOR=#000000][FONT=monospace]cd ~
mkdir svn
cd svn
svn checkout [URL=‘https://svn.code.sf.net/p/freeghost/code/trunk’][COLOR=#3366bb]https://svn.code.sf.net/p/freeghost/code/trunk[/COLOR][/URL]
[/FONT][/COLOR]
[SIZE=4][B][FONT=sans-serif][COLOR=#000000]Install It![/COLOR][/FONT][/B][/SIZE][COLOR=#000000][FONT=monospace]cd ~/svn/trunk/bin
sudo ./installfog.sh[/FONT][/COLOR] -
Tried both suggestions with no luck. Fog is running just fine shows 1.2.0 but it still sticks at the /init.xz… ok
-
if it shows 1.2.0 you aren’t running the SVN version then if it was SVN your cloud logo would have a 4 digit number most likely 3374.
-
Actually it says 2922. But i have followed the upgrade as suggested. Could i have done it wrong.
-
When you run the check out command what version did it say it found?
-
It says 3377. I re downloaded and installed but no luck. If anything once I get the fog boot screen and make a selection, either quick registration or set a task to upload it just goes to a blank screen next.
-
I did check tftp access and it is just fine.
-
Ok. I was going to uninstall the whole thing but I tried the first entry in this link for uninstalling fog [url]http://jbob.io/wiki/index.php/Uninstall_FOG[/url] . At this point it lets me inventory a machine and I am going to try another upload.
-
I’ll walk you through upgrading, if you haven’t torn out the installation yet…
