Problems after update from 0.32 to 1.2.0
-
Also,
I just tested the mobile user quick image stuff, and it worked perfectly.
-
Are you running Fedora 12, or Fedora 21?
-
Fedora 12.
I reinstalled
Its getting closer!!!
It is trying to image and says that there is an image ID error. -
ITS WORKING!!!
Thanks so much for your help!!
Can you tell if this update will help us imaging UEFI machines or if there is anything else i should be doing to get them to work? we are having a tough time getting them imaged. currently we are imaging them with clonezilla, and it is not an easy process for our techs. -
[quote=“Vickie Osbornr, post: 46256, member: 29486”]ITS WORKING!!!
Thanks so much for your help!!
Can you tell if this update will help us imaging UEFI machines or if there is anything else i should be doing to get them to work? we are having a tough time getting them imaged. currently we are imaging them with clonezilla, and it is not an easy process for our techs.[/quote]There are several UEFI bootfiles to choose from.
ipxe.efi
snp.efi
snponly.efiI’m not sure how you’re environment is set up, but whatever hands out the bootfile name, that would just need changed. If you’re using dnsmasq, you’ll need to restart that service after each change. Try all of the .efi files till you find one that works.
Secure Boot must also be disabled in the target host’s firmware.
-
Are there directions for changing these? Where do i get them?
Thank you for your help!
-
You already have them. They downloaded to the /tftpboot directory when you reinstalled. There’s normally no need to change anything in there.
If you’re handing out your bootfile and next-server information via Windows DHCP, you’d simply go into that, go into scope options, and set option 067 to one of those files and then test it.
If you’re using dnsmasq, you’d need to edit the ltsp.conf file and change the boot-file name, and then restart dnsmasq.
Look through this: [url]http://fogproject.org/wiki/index.php/Modifying_existing_DHCP_server_to_work_with_FOG[/url]
Let us know if you have issues. -
I feel like i am sooooo close!!
I used snponly.efi and now i can get to the boot menu. but any option i choose just loops back to the menu.
-
[quote=“Vickie Osbornr, post: 46271, member: 29486”]I feel like i am sooooo close!!
I used snponly.efi and now i can get to the boot menu. but any option i choose just loops back to the menu.[/quote]
What is the model of this UEFI target-host?
-
Asus X200M
-
Are you using the on-board NIC or an add-in NIC?
I read in the specs for this device that the on-board is only 100Mbps so this is why I ask.
-
we are using the onboard nic
-
Is “protected boot” or “secure boot” or “secure boot state” or “secure boot control” enabled in the firmware ? If they are enabled, disable them and try again.
Is there a setting for “Launch CSM” ? Can you enable that and try again?
-
secure boot is disabled and Launch CSM is enabled.
init.xz … flashes on screen and goes back to boot menu -
Can you try to grab a newer kernel via the FOG Settings page? try one for x86_x64 first and see if that works. If not, then try just x86, then just x64.
-
ok… i have done that and now we are getting stuck on a trace screen. and that’s all my computers are getting stuck there when booting up.
-
then revert back to the older kernel.
-
how do i know what the old kernel was?
-
here is the screen
[url=“/_imported_xf_attachments/1/1930_20150427_142141_resized_1.jpg?:”]20150427_142141_resized_1.jpg[/url]
-
FOG 1.2.0 used kernel [SIZE=13px][FONT=arial][COLOR=#262626]3.14.2[/COLOR][/FONT][/SIZE]
[SIZE=13px][FONT=arial][COLOR=#262626]However, before you do that, did you change the boot-file back to the previous one?[/COLOR][/FONT][/SIZE]
[SIZE=13px][FONT=arial][COLOR=#262626]The EFI boot files are not compatible with BIOS type firmware. [/COLOR][/FONT][/SIZE]
