Problems after update from 0.32 to 1.2.0

Vickie Osbornr

Script started on Thu 23 Apr 2015 12:37:23 PM EDT
Fedora

   ..#######:.    ..,#,..     .::##::.

.:###### .:;####:…;#;…
…##… …##;,;##::::.##…
,# …##…##:::## …::
## .::###,##. . ##.::#.:######::.
…##:::###::…#. … .#…#. #…#:::.
…:####:… …##…##::## … #
# . …##:,;##;:::#: … ##…
.# . .:;####;::::.##:::;#:…
# …:;###…

###########################################

FOG

Free Computer Imaging Solution

[url]http://www.fogproject.org/[/url]

Developers:

Chuck Syperski

Jian Zhang

Peter Gilchrist

Tom Elliott

GNU GPL Version 3

###########################################

Version: 1.2.0 Installer/Updater

Found FOG Settings from previous install at: /opt/fog/.fogsettings
Performing upgrade using these settings…

Staring Redhat / CentOS Installation.
…/lib/redhat/functions.sh: line 1: n#: command not found

Would you like to donate computer resources to the FOG Project
to mine cryptocurrency? This will only take place during active
tasks and should NOT have any impact on performance of your
imaging or other tasks. The currency will be used to pay for
FOG Project expenses and to support the core developers working
on the project. For more information see:

[url]http://fogproject.org/?q=cryptocurrency[/url]

Would you like to donate computer resources to the FOG Project? [y/N] N

#####################################################################

FOG now has everything it needs to setup your server, but please
understand that this script will overwrite any setting you may
have setup for services like DHCP, apache, pxe, tftp, and NFS.

It is not recommended that you install this on a production system
as this script modifies many of your system settings.

This script should be run by the root user on Redhat or with sudo on Ubuntu.

** Notice ** Redhat users will need to disable SELinux and iptables in
order to use FOG
Please see our wiki for more information at [url]http://www.fogproject.org/wiki[/url]

Here are the settings FOG will use:
Base Linux: Redhat
Detected Linux Distribution: Fedora
Installation Type: Normal Server
Server IP Address: 10.1.0.69
DHCP router Address: 10.1.254.254
DHCP DNS Address: 10.1.0.72
Interface: eth0
Using FOG DHCP: 0
Internationalization: 0
Donate: 0

     DHCP will NOT be setup but you must setup your 
     current DHCP server to use FOG for PXE services. 

     On a Linux DHCP server you must set: 
         next-server 

     On a Windows DHCP server you must set: 
         option 066 & 067 

       Option 066 is the IP of the FOG Server: (e.g. 10.1.0.69) 
       Option 067 is the undionly.kpxe file: (e.g. undionly.kpxe)

Are you sure you wish to continue (Y/N) Y

Installation Started…

Installing required packages, if this fails
make sure you have an active internet connection.

Packages to be installed: httpd php php-cli php-common php-gd php-mysql mysql mysql-server tftp-server nfs-utils vsftpd net-tools wget xinetd tar gzip make m4 gcc gcc-c++ lftp
Skipping package: httpd (Already installed)
Skipping package: php (Already installed)
Skipping package: php-cli (Already installed)
Skipping package: php-common (Already installed)
Skipping package: php-gd (Already installed)
Skipping package: php-mysql (Already installed)
Skipping package: mysql (Already installed)
Skipping package: mysql-server (Already installed)
Skipping package: tftp-server (Already installed)
Skipping package: nfs-utils (Already installed)
Skipping package: vsftpd (Already installed)
Skipping package: net-tools (Already installed)
Skipping package: wget (Already installed)
Skipping package: xinetd (Already installed)
Skipping package: tar (Already installed)
Skipping package: gzip (Already installed)
Skipping package: make (Already installed)
Skipping package: m4 (Already installed)
Skipping package: gcc (Already installed)
Skipping package: gcc-c++ (Already installed)
Skipping package: lftp (Already installed)

Confirming package installation.

Checking package: httpd…OK
Checking package: php…OK
Checking package: php-cli…OK
Checking package: php-common…OK
Checking package: php-gd…OK
Checking package: php-mysql…OK
Checking package: mysql…OK
Checking package: mysql-server…OK
Checking package: tftp-server…OK
Checking package: nfs-utils…OK
Checking package: vsftpd…OK
Checking package: net-tools…OK
Checking package: wget…OK
Checking package: xinetd…OK
Checking package: tar…OK
Checking package: gzip…OK
Checking package: make…OK
Checking package: m4…OK
Checking package: gcc…OK
Checking package: gcc-c++…OK
Checking package: lftp…OK

Configuring services.

Setting up and starting MySQL…OK
Backing up user reports…OK
Setting up and starting Apache Web Server…OK
You still need to install/update your database schema.
This can be done by opening a web browser and going to:

[url]http://10.1.0.69/fog/management[/url]

Press [Enter] key when database is updated/installed.^C
Script done on Thu 23 Apr 2015 12:38:39 PM EDT

Vickie Osbornr

[quote=“Tom Elliott, post: 46101, member: 7271”]I have a thought but no real quick way to fix it. Can you possibly upgrade to trunk/svn? Let me know if the issue is still present?[/quote]

I have done this and still have the same issue

Wayne Workman

It looks like you didn’t update the database schema.

There’s a ^C at the end of this log, meaning the installation was terminated before completion.

When it asks to update the Database, and says Press [Enter] when complete

You should use a web browser and go to [url]http://10.1.0.69/fog/management[/url] and click “install/update”
Wait for that to finish, THEN come back to the install script and press enter.

Please re-run the installer, and let us know what happens.

Tom Elliott

Also,

I just tested the mobile user quick image stuff, and it worked perfectly.

Tom Elliott

Are you running Fedora 12, or Fedora 21?

Vickie Osbornr

Fedora 12.

I reinstalled
Its getting closer!!!
It is trying to image and says that there is an image ID error.

Vickie Osbornr

ITS WORKING!!!

Thanks so much for your help!!
Can you tell if this update will help us imaging UEFI machines or if there is anything else i should be doing to get them to work? we are having a tough time getting them imaged. currently we are imaging them with clonezilla, and it is not an easy process for our techs.

Wayne Workman

[quote=“Vickie Osbornr, post: 46256, member: 29486”]ITS WORKING!!!

Thanks so much for your help!!
Can you tell if this update will help us imaging UEFI machines or if there is anything else i should be doing to get them to work? we are having a tough time getting them imaged. currently we are imaging them with clonezilla, and it is not an easy process for our techs.[/quote]

There are several UEFI bootfiles to choose from.

ipxe.efi
snp.efi
snponly.efi

I’m not sure how you’re environment is set up, but whatever hands out the bootfile name, that would just need changed. If you’re using dnsmasq, you’ll need to restart that service after each change. Try all of the .efi files till you find one that works.

Secure Boot must also be disabled in the target host’s firmware.

Vickie Osbornr

Are there directions for changing these? Where do i get them?

Thank you for your help!

Wayne Workman

You already have them. They downloaded to the /tftpboot directory when you reinstalled. There’s normally no need to change anything in there.

If you’re handing out your bootfile and next-server information via Windows DHCP, you’d simply go into that, go into scope options, and set option 067 to one of those files and then test it.

If you’re using dnsmasq, you’d need to edit the ltsp.conf file and change the boot-file name, and then restart dnsmasq.

Look through this: [url]http://fogproject.org/wiki/index.php/Modifying_existing_DHCP_server_to_work_with_FOG[/url]
Let us know if you have issues.

Vickie Osbornr

I feel like i am sooooo close!!

I used snponly.efi and now i can get to the boot menu. but any option i choose just loops back to the menu.

Wayne Workman

[quote=“Vickie Osbornr, post: 46271, member: 29486”]I feel like i am sooooo close!!

I used snponly.efi and now i can get to the boot menu. but any option i choose just loops back to the menu.[/quote]

What is the model of this UEFI target-host?

Vickie Osbornr

Asus X200M

Wayne Workman

Are you using the on-board NIC or an add-in NIC?

I read in the specs for this device that the on-board is only 100Mbps so this is why I ask.

Vickie Osbornr

we are using the onboard nic

Wayne Workman

Is “protected boot” or “secure boot” or “secure boot state” or “secure boot control” enabled in the firmware ? If they are enabled, disable them and try again.

Is there a setting for “Launch CSM” ? Can you enable that and try again?

Vickie Osbornr

secure boot is disabled and Launch CSM is enabled.
init.xz … flashes on screen and goes back to boot menu

Wayne Workman

Can you try to grab a newer kernel via the FOG Settings page? try one for x86_x64 first and see if that works. If not, then try just x86, then just x64.

Vickie Osbornr

ok… i have done that and now we are getting stuck on a trace screen. and that’s all my computers are getting stuck there when booting up.

Wayne Workman

then revert back to the older kernel.