Can't complete the fog install!

orbspider

Hi there,
i’ve been trying for hours now to install fog 1.2.0 by following the instructions at [url]http://www.fogproject.org/wiki/index.php/Installation_on_Debian_Lenny[/url]
because my OS is Debian Wheezy.

I’ve installed MYSQL with and without password and either way I can’t get into the fog management page at the address which the fog install script gave me to use - it just shows “connecting” for a long while then time out.

I actually installed mysql-server first before fog script ran, and in its conf file /etc/mysql/my.cnf I # out the bind-address, as the only way for the service to start.

what should I be looking at as solution to getting into fog management? it appears apache and mysql are running ok. … thanks

orbspider

This post is deleted!

orbspider

the file /var/www/fog/commons/config.php did not exist

the file /opt/fog/service/etc/config.php

i added the mysql password to like so

<?php
define( “MYSQL_PASSWORD”, “xxxx” );
define( “WEBROOT”, “/var/www/fog” );
?>

Junkhacker

the file /var/www/fog/commons/config.php isn’t supposed to exist in 1.2.0

define( “MYSQL_PASSWORD”, “xxxx” ); doesn’t belong in
/opt/fog/service/etc/config.php either

orbspider

so whats the reason for no access to [url]http://192.168.0.142/fog/management[/url] ? tnx

Junkhacker

please post the contents of /var/log/foginstall.log

orbspider

here it is,

[CODE] Here are the settings FOG will use:
Base Linux: Debian
Detected Linux Distribution: Debian
Installation Type: Normal Server
Server IP Address: 192.168.0.142
DHCP router Address: 192.168.0.1
DHCP DNS Address: 192.168.0.1
Interface: eth0
Using FOG DHCP: 0
Internationalization: 0
Donate: 0

    DHCP will NOT be setup but you must setup your
    current DHCP server to use FOG for PXE services.

    On a Linux DHCP server you must set:
        next-server

    On a Windows DHCP server you must set:
        option 066 & 067

      Option 066 is the IP of the FOG Server: (e.g. 192.168.0.142)
      Option 067 is the undionly.kpxe file: (e.g. undionly.kpxe)

Are you sure you wish to continue (Y/N) y

Installation Started…

Installing required packages, if this fails
make sure you have an active internet connection.

Preparing apt-get
Installing package: apache2
Installing package: php5
Installing package: php5-json
Installing package: php5-gd
Installing package: php5-cli
Installing package: php5-mysql
Installing package: php5-curl
Installing package: mysql-server

We are about to install MySQL Server on
this server, if MySQL isn’t installed already
you will be prompted for a root password.

Press enter to acknowledge this message.

E: dpkg was interrupted, you must manually run ‘sudo dpkg --configure -a’ to correct the problem.

Installing package: mysql-client
Installing package: tftpd-hpa
Installing package: tftp-hpa
Installing package: nfs-kernel-server
Installing package: vsftpd
Installing package: net-tools
Installing package: wget
Installing package: xinetd
Installing package: sysv-rc-conf
Installing package: tar
Installing package: gzip
Installing package: build-essential
Installing package: cpp
Installing package: gcc
Installing package: g++
Installing package: m4
Installing package: htmldoc
Installing package: lftp
Installing package: openssh-server
Installing package: php-gettext
Installing package: clamav-freshclam

Confirming package installation.

Checking package: apache2…OK
Checking package: php5…OK
Checking package: php5-json…OK
Checking package: php5-gd…OK
Checking package: php5-cli…OK
Checking package: php5-mysql…OK
Checking package: php5-curl…OK
Checking package: mysql-server…OK
Checking package: mysql-client…OK
Checking package: tftpd-hpa…OK
Checking package: tftp-hpa…OK
Checking package: nfs-kernel-server…OK
Checking package: vsftpd…OK
Checking package: net-tools…OK
Checking package: wget…OK
Checking package: xinetd…OK
Checking package: sysv-rc-conf…OK
Checking package: tar…OK
Checking package: gzip…OK
Checking package: build-essential…OK
Checking package: cpp…OK
Checking package: gcc…OK
Checking package: g++…OK
Checking package: m4…OK
Checking package: htmldoc…OK
Checking package: lftp…OK
Checking package: openssh-server…OK
Checking package: php-gettext…OK
Checking package: clamav-freshclam…OK

Configuring services.

Setting up and starting MySql…OK
Backing up user reports…OK
Setting up and starting Apache Web Server…OK
You still need to install/update your database schema.
This can be done by opening a web browser and going to:

http://192.168.0.142/fog/management

Press [Enter] key when database is updated/installed.

Configuring Fresh Clam…OK
Setting up storage…OK
Setting up and starting DHCP Server…Skipped
Setting up and starting TFTP and PXE Servers…OK
Setting up and starting VSFTP Server…OK
Setting up sudo settings…OK
Setting up FOG Snapins…OK
Setting up and building UDPCast…OK
Installing init scripts…OK
Setting up FOG Services…OK
Starting FOG Multicast Management Server…OK
Starting FOG Image Replicator Server…OK
Starting FOG Task Scheduler Server…OK
Setting up FOG Utils…OK

Would you like to notify the FOG group about this installation?
* This information is only used to help the FOG group determine
if FOG is being used. This information helps to let us know
if we should keep improving this product.

Send notification? (Y/N)n
NOT sending notification.

Setup complete!

You can now login to the FOG Management Portal using
the information listed below. The login information
is only if this is the first install.

This can be done by opening a web browser and going to:

  http://192.168.0.142/fog/management

  Default User:
        Username: fog
        Password: password

Script done on Thursday 12,February,2015 12:31:18 AM SGT[/CODE]

Tom Elliott

Your own log is telling you something else is screwed up.

Press enter to acknowledge this message.

E: dpkg was interrupted, you must manually run ‘sudo dpkg --configure -a’ to correct the problem.

Installing package: mysql-client

orbspider

well yes there was an interruption, as this isn’t the first install’s log, but subsequent, after it got stuck as well.

apache log can’t post here, so its at pastebin

[url]http://pastebin.com/FAYdac7U[/url]

ive searched a plenty… and my eyes are square, so i will need to leave this till tomorrow.

Tom Elliott

First thing I notice,

[Thu Feb 12 00:13:05 2015] [warn] (101)Network is unreachable: connect to listener on [::]:80

orbspider

funny as theres no firewall I dont think, its a fresh install of debian

Tom Elliott

There is always a firewall installed on Ubuntu, called

ufw.

[code]sudo ufw disable[/code]

What worries me though is you seem to have performed steps before you knew what to do.

Meaning you had mysql installed before installing fog, so how many problems.

orbspider

I have also purged mysql and let it install with fog too. the first time mysql simply wouldn’t start - until I hashed out the bind-address line - so i tried then to install it before fog.

this is debian not ubuntu!!

Tom Elliott

Why?

The bind-address will need to be commented out later, but if you’re specifying a mysql password, then why not enter it on your localhost (of which bindaddress is defaulted to anyway)?

orbspider

I last installed mysql without password, just blanks

plus what you suggest is not given in the user guide so how would I know (I’m not a server experienced person)

Tom Elliott

what do you mean it’s not in the userguid?

What guide, exactly, did you follow?

It looks like you have done whatever you think is correct based on other peoples ideas.

Rather than looking at what’s changed between versions, you went under an assumption to set mysql password in the /opt/fog/etc/config.php file (which won’t work)

You say it’s not there, but I want to know what you’re reading and failing to understand.

orbspider

I found that I should change Listen 80 to Listen 0.0.0.0:80 in /etc/apache2/ports.conf

for that apache error, and restart it, but I still can’t access fog in web browser

orbspider

Pls refer to top post! link to user guide for other versions of Linux - ie Debian. That’s what I followed, official fog pages right?

I only search for answers when problems happened, like not what was expected from following the guide.

Tom Elliott

You mean [url]http://www.fogproject.org/wiki/index.php/Installation_on_Debian_Lenny[/url]

Which is for 0.32 installation of Debian Lenny,

Not FOG 1.2.0 on Debian Wheezy?

orbspider

Well, you are correct in that Lenny is not my release of Debian.

I got to that page from the front page of the User Guide here [url]http://fogproject.org/wiki/index.php/FOGUserGuide[/url]

link:
2 Installing FOG > 2.2 Installation on different distributions of Linux >> Debian > Debian Wheezy

Can't complete the fog install!

158

11.8k

17.2k

154.9k