PXE-T01 : File not found
-
Hi everyone I am new to all this. I am try to get fog server running in a school. The problem is when I try to boot a Pc to connect to the FS it gives me:
PXE-T01 : File not found
PXE-E3B : TFTP Error - File not found
I try searching to find out a fix but what I find is that I have to see if the file is correct. I think That it just doen’t existe. Can any One help me please. -
fog version? with fog as dhcp or not? if not, did you configure your dhcp server for pxe booting with fog? did you read the instructions that you were given when you were installing fog?
-
Thank you for your reply.
The version is 1.2 with the ip 10.1.8.1, after I input the ip I want I said no to everything else. No to router address DHCP server, No to DNS address DHCP server and Cliente boot, No to Change defalt network interface and No to Server for DHCP service.
I don’t know if I did it right I folowed a instalation tutorial for the same quarantine network that we have in this school: [media=youtube]QXHD-IQZigE[/media]
I’ll try to responde all that you ask. -
did you configure your dhcp server for pxe booting with fog?
-
[CENTER][B][FONT=Calibri]Hostname[/FONT][/B][/CENTER]
[CENTER][B][FONT=Calibri]IP Lan[/FONT][/B][/CENTER]
[CENTER][B][FONT=Calibri]Tipo de Equip.[/FONT][/B][/CENTER]
[CENTER][B][FONT=Calibri]Vlan[/FONT][/B][/CENTER]
[CENTER][B][FONT=Calibri]Interface[/FONT][/B][/CENTER]
[CENTER][FONT=Calibri]E1608480-B1SW2 [/FONT][/CENTER]
[CENTER][FONT=Calibri]10.1.8.1[/FONT][/CENTER]
[CENTER][FONT=Calibri]Servidor[/FONT][/CENTER]
[CENTER][FONT=Calibri]13[/FONT][/CENTER]
[CENTER][FONT=Calibri]gi0/18[/FONT][/CENTER]
[COLOR=#1f497d][FONT=Calibri] [/FONT][/COLOR]
[COLOR=#1f497d][FONT=Calibri]Adicionalmente foi configurado no DHCP da VLAN de Quarentena as seguintes opções:[/FONT][/COLOR]
[COLOR=#1f497d][FONT=Calibri] [/FONT][/COLOR]
[COLOR=#1f497d][FONT=Calibri]Next Server: 10.1.8.1[/FONT][/COLOR]
[COLOR=#1f497d][FONT=Calibri]Bootfile: pxelinux.0[/FONT][/COLOR]
[COLOR=#1f497d][FONT=Calibri][/FONT][/COLOR] -
Bootfile for 1.x.x+ is now undionly.kpxe, undionly.kkpxe, or undionly.kkpxe_Intel
Change to:
[COLOR=#1f497d][FONT=Calibri]Next Server: 10.1.8.1[/FONT][/COLOR]
[COLOR=#1f497d][FONT=Calibri]Bootfile: undionly.kpxe[/FONT][/COLOR] -
ANd that will resolve the problem???
-
Well you could try it.
-
well, i can tell you that if you’re running fog 1.2.0 then pxelinux.0 will certainly NOT work (with the exception of special configuration methods that chainload to a ipxe network boot file after pxelinux.0 is loaded)
-
Ok so I asked to change the bootfile to undionly.kpxe and it and passes that step and it goes to [FONT=arial][COLOR=#545454][SIZE=3]“iPXE [/SIZE][/COLOR][/FONT][FONT=arial][COLOR=#545454][B][SIZE=3]initializing devices” and the Pc just reboots without showing any menu. Now what am I doing wrong???[/SIZE][/B][/COLOR][/FONT]
-
[quote=“Ricardo Sanches, post: 40277, member: 25923”]Ok so I asked to change the bootfile to undionly.kpxe and it and passes that step and it goes to [FONT=arial][COLOR=#545454][SIZE=3]“iPXE [/SIZE][/COLOR][/FONT][FONT=arial][COLOR=#545454][B][SIZE=3]initializing devices” and the Pc just reboots without showing any menu. Now what am I doing wrong???[/SIZE][/B][/COLOR][/FONT][/quote]
I solved my PXE-T01 issues by using DNSMASQ
