Windows 7 image on Hyper-v wont boot from ipxe

jahilton2002

i have this at the momment;

print “#!ipxe\n”;
print “cpuid --ext 29 && set arch x86_64 || set arch i386\n”;
print “colour --rgb 0xff6600 2\n”;
print “cpair --foreground 7 --background 2 2\n”;
[B]//print “console --picture $this->booturl/ipxe/bg.png --left 100 --right 80\n”;[/B]
} else {
if (!$this->hiddenmenu)
{
$showDebug = $_REQUEST[“debug”] === “1”;
print “:MENU\n”;
print “menu\n”;
// Checks if the host is registered or not.
// Displays the Host name if it is, otherwise
// Tells the user it’s not registered.
if ($this->Host && $this->Host->isValid()

jahilton2002

Sorry just an update…got this working using the above post#9

thanks for all your help

[ATTACH=full]1395[/ATTACH]

[url=“/_imported_xf_attachments/1/1395_Capture.PNG?:”]Capture.PNG[/url]

jahilton2002

I’m pulling my hair out now, as i had it working!.. i had to do a reinstall of fog as i started to get odd errors… im back to square one again now. Hyper-v wont boot to ipxe… i’ve tried to re enter my settings as in post 9# and after a restart. it nolonger works…

i’ve restored the menuboot.class.php to the default settings…(as below) any ideas?

[CODE]

    print "#!ipxe\n";
    print "cpuid --ext 29 && set arch x86_64 || set arch i386\n";
    print "colour --rgb 0xff6600 2\n";
    print "cpair --foreground 7 --background 2 2\n";
    if (substr($_REQUEST['mac'],0,8)=="00:15:5d"){
                    print "# Hyper-V MAC address detected - no console background\n";
            } else  {
                    print "console --picture $this->booturl/ipxe/bg.png --left 100 --right 80\n";
    if (!$this->hiddenmenu)
    {
        $showDebug = $_REQUEST["debug"] === "1";
        print ":MENU\n";
        print "menu\n";

[/CODE]

Tom Elliott

Did you literally restore the file as menuboot.class.php?

It’s name should be BootMenu.class.php (case important.)

jahilton2002

sorry, thats a typo on my part…BootMenu.class.php is what was restored. thanks

jahilton2002

any recommendations.

BPSTravis

Can you walk us trough exactly what you get now? Does it grab an IP to PXE to, does anything from fog show up, does it retrieve the init.xz or the bzimage file?

jahilton2002

Hi thanks for your reply… it looks just like it does now in post #1… that’s my hyper-v windows 7 machine… all other physical clients are unaffected

thanks

BPSTravis

Ok, did you comment out this line as you did before?

[QUOTE][B]//print “console --picture $this->booturl/ipxe/bg.png --left 100 --right 80\n”[/B][/QUOTE]

[QUOTE]sorry, thats a typo on my part…BootMenu.class.php is what was restored. thanks[/QUOTE]
By restored i’m assuming you put the default menu back in.

jahilton2002

Thank you for looking into this.

And yes sir. [B][I][SIZE=12px]//print “console --picture $this->booturl/ipxe/bg.png --left 100 --right 80\n” [/SIZE][/I][/B][I][SIZE=12px]in place[/SIZE][/I]

and yes the default file was put back in place.

Tom Elliott

If you want,

You can try the lastest svn too.

Since 1.2.0 I’ve learned how to test whether the console part will operate or not and adjust the screen accordingly.

jahilton2002

Did a fresh reinstall of 14.01.1 today…aswell as fog 1.2.0… commentied the line out of BootMenu.class.php.

[B][I][SIZE=12px]//print “console --picture $this->booturl/ipxe/bg.png --left 100 --right 80\n”[/SIZE][/I][/B]

[SIZE=12px]s[/SIZE][SIZE=12px]till the same as post #1 nothing to do with having teamed network cards?[/SIZE]

[SIZE=12px]When i installed fog… i changed from “eth0” to “bond0”[/SIZE]

[SIZE=12px]all clients boot to ipxe fine… hyper-v boots to ipxe but fails to load the bg. as in post one.[/SIZE]

[SIZE=12px]i’m stumped.[/SIZE][SIZE=12px] [/SIZE]

jahilton2002

I guys, can anybody help me on this matter… the odd thing is… i have had it working…(post #10).

I just don’t understand why i can’t get it working now…i dont want to have to make a physical machine just to do my primary image.

purpleturtle99

Hi Jah, I have been using Hyper-V to do some Win7 64 bit images. You have to have a legacy NIC on the Vm and the boot order in the BIOS must be this legacy NIC. And the Fog server doing the DHCP

jahilton2002

Hi thanks for your reply… Yes its a Legacy NIC on Hyper-v and set to first boot… however my on site DHCP server is serving the dynamic IPs.

I do get an IP address from my DHCP…it just displays the error in POST #1

Thanks again for looking at this.

jahilton2002

Hi thanks for your help Purpleturtle99! after switch fog to do DHCP i can now boot from LAN thank you!

Windows 7 image on Hyper-v wont boot from ipxe

165

12.0k

17.3k

155.2k