chown -R fog:fog /images
the permissions are reset after a reboot. How can i make them permanent?
I have a new 1.5.4 install that i will be using with win10 clients. Should i be using Partimage or partclone?
Thanks for your input
@Sebastian-Roth Hi Sebastian.
Just wanted to say thank very much on trying to sort this issue with our old 1.2.0 images on 1.5.4
After talking to my tech team here, we’ve decided to “take the hit”. We have a live golden instance of a windows 7 VM running on Hyper-v that we can recapture with the new instance of fog. We just need to add hardware specific drivers etc.
So not to take anymore of your time and the fact we will be moving to windows 10 anyway very soon. I say thank you very much for all your effort however we are no longer pursuing a fix to this issue.
thank you once again.
@Sebastian-Roth Again thanks for your help. But it hasn’t worked, same error
contents of d1.partitions;
@Sebastian-Roth Sorry missed your last post.
See screenshots below… also see my previous post about the screen that flashes up very fast.
A little update here.
I noticed a screen flash up really quickly, but managed to get a pic of it.
Is referencing “d1.partitions” in “/images/StonePC1210h110ma/”
But that file doesn’t exist.
I’ve added a screenshots and the contents of “StonePC1210h110ma” in the /images location.
Thanks again if you’re able to help.
@Quazz no joy thanks for your input
Thanks for having a look
Now first of i must apologize, it’s been a very long time since i’ve needed to troubleshoot FOG.
I’ve used FOG 1.2.0 with Ubuntu 14.04 for many years without an issue. I’m convinced it’s something i’m overlooking as quite a lot has changed since 1.2.0!
Long story short, our 15 year old fog hardware was on it’s last leg, so i decided now would be the best time to update the latest ubuntu LTS version along with fog. I have done this before with 12.04 and fog 0.98 i think it was.
I have copied the images to the new server into the /images folder.
Recreated the image definitions in fog UI along with the correct case sensitive file names.
This worked on older versions, so i guess i’ve missed something or i can no longer use that method.
I’ve noted that on the new install, “image size” is 0.00iB which i guess isn’t right. I’ve also noticed it takes a very long time to delete the MBR when attenpliting to reimage.
They say pictures speak a 1000 words, so i’ve added some into this post.
Thanks in advance for taking to time to view this.
today i discovered my FOGserver was clashing with our onsite DHCP server.
I could fix the issue by turning the FOGserver off.
so i decided to stop the DHCP service on the fog machine using;
sudo /etc/init.d/dhcp3-server stop
sudo sysv-rc-conf dhcp3-server off
this didn’t fix the issue, as it couldn’t “stop” the service.
I then decided to remove the DHCP service using;
“sudo apt-get remove isc-dhcp-server”
this worked! yay…
…but now my clients can boot to ipxe, but i get the following error… can anybody help?
thanks in advance.