FOG 1.2.0 w/ DHCP/BOOTP Reply not for us
-
Have you tried the undionly.kkpxe supplied?
-
I have a lab of 1600’s that is currently being deployed. Once it is done I will try that one and let you know. Is there a process I need to do to undo the chainloading of pxe to ipxe or will it matter?
-
if you set the network to boot to one of the ipxe file, like undionly.kpxe, that should be all you need to do. the chainloading is done by pxelinux.0, and if that’s not the network boot file, the chainloading isn’t done
-
I have tried both undionly.kpxe and undionly.kkpxe from official 3.14.2 kernel as well as the unofficial 3.16.0 kernel. They both still give me the DHCP/BOOTP Reply not for us message on the Optiplex 755 have not tried on the 760 yet.
-
After letting them sit for awhile they do go into the registration process then do what is in the picture.[ATTACH=full]1264[/ATTACH]
[url=“/_imported_xf_attachments/1/1264_2014-08-07_11-09-35_290.jpg?:”]2014-08-07_11-09-35_290.jpg[/url]
-
I can now add a third model to my list that will not work. So total that I have on my campus that will not register with fog include Dell optiplex 755, 760, and 780. They all three give the DHCP/BOOTP Reply not for us error.
-
i have tested the 755 and 780 myself, the problem is your network
-
So what has changed from version .32 where this worked with no problems on our network to now? We do not have STP enabled on our network. All switches are Extreme Networks brand
-
That error “No DHCP or proxyDHCP offers were received” sounds like the computers are looking to FOG for an ip address ( I have run into this issue but with a different model), this method should also get your undionly.kpxe working without the need of chainbooting. First undo the changed you have made to chainload PXE to IPXE. Once that is done,install dnsmasq by running [B]sudo apt-get install dnsmasq[/B] Then follow this guide. [url]http://www.fogproject.org/wiki/index.php/Using_FOG_with_an_unmodifiable_DHCP_server/_Using_FOG_with_no_DHCP_server#DNSMASQ_settings_for_iPXE[/url], (ltsp.conf is located in /etc/dnsmasq.d/)
If your computers are on the 192.168.x.x subnet, change the line in /etc/dnsmasq.d/ltsp.conf that says
[code]dhcp-range=10.0.0.10,proxy[/code]
to
[code]dhcp-range=192.168.1.10,proxy,255.255.0.0[/code]Afterwards restart the dnsmasq service. If running [B]sudo service dnsmasq restart[/B] fails, use [B]sudo /etc/init.d/dnsmasq restart[/B] instead.
Ensure that you did that step where you made a symlink between undionly.kpxe and undionly.0, if you don’t computers won’t find a file to boot to.
Once you have completed those steps, test a computer.
If this method works, you can disable the 3 second time-out on network boots by changing the line [B]pxe-prompt=“Press F8 for boot menu”, 3[/B] in /etc/dnsmasq.d/ltsp.conf to [B]pxe-prompt=“Press F8 for boot menu”, 0[/B]
-
Jbob thank you that seems to be working on the 755, I will be able to test on the 760 and the 780 later this afternoon.
-
This did work for the 760’s and 780’s as well. Thank you very much for the help Jbob, Junkhacker, and Tom
