Fatal Error: failed to mount NFS volume
-
Warning: Most of this information is pulled from this post --> [url]http://fogproject.org/forum/threads/how-to-setup-a-fog-storage-node-without-installing-fog.4294/#post-12035[/url] but the following excludes haneWIN NFS Server. Woot! open source!
I have set this up and it …was working. Until my resent update to v1.0.0 but thats another post in another discussion. Check these settings against yours.
Server 2008 R2:
Install NFS role.
[ATTACH=full]740[/ATTACH]
[ATTACH=full]743[/ATTACH]
[ATTACH=full]758[/ATTACH]
[ATTACH=full]745[/ATTACH]
[ATTACH=full]759[/ATTACH]
Make sure you do this for C:, C:\images, and C:\images\dev
Filezilla:
[ATTACH=full]747[/ATTACH]Make sure these files $ Directories all have Read, write, delete, append rights
[ATTACH=full]746[/ATTACH]
Fog server: (Terminal or ssh)
Here is the tricky part…You need to copy the hiddent files on your linux server to your windows server. These files are located @:/images/.mntcheck --> c:\images
/images/dev/.mntcheck --> c:\images\dev\xxx.xxx.xxx.xxx ==> ip address of the windows server
I mounted the NFS drive and just did a cp command.
[CODE]sudo mkdir images2
sudo chmod 777 images2
sudo mount xxx.xxx.xxx.xxx:/images /images2
cp /images/.mntcheck /images2
cp /images/dev/.mntcheck /images2/dev/
sudo umount /images2
[/CODE]
Fog web interface:
Then continue by adding a storage node just as you would in the wiki.
[QUOTE]I Simply added a Storage Node Definition in its own Storage Group independent to the default storage Group, added it’s IP 172.19.102.6 and the path /images/ because it’s the path 172.19.102.6 exports also /images/dev/ like an original FOG node does.
[IMG]http://i.imgur.com/2cZcI4J.png[/IMG]
[IMG]http://i.imgur.com/VB2LeZM.png[/IMG]
[/QUOTE]Only issue I have now is when updating the same image it will not overwrite the old image until I delete it or change the rights on that image.
[url=“/_imported_xf_attachments/0/740_NFS Sharing.png?:”]NFS Sharing.png[/url][url=“/_imported_xf_attachments/0/743_NFS Permissions.png?:”]NFS Permissions.png[/url][url=“/_imported_xf_attachments/0/745_security.png?:”]security.png[/url][url=“/_imported_xf_attachments/0/746_File zilla folders.png?:”]File zilla folders.png[/url][url=“/_imported_xf_attachments/0/747_File zilla.png?:”]File zilla.png[/url][url=“/_imported_xf_attachments/0/758_Security 2.png?:”]Security 2.png[/url]
-
Thank you very much for the tip.
I’ve compared our settings against yours and it helped. Anonymous login was not configured on the server.
Unfortunately, another error has popped up: unable to create /images/MAC-address.
Also, I’ve discovered that I’m not able to write anything from the Linux server to the Windows server via NFS. “Permission denied” shows up every time, so I’ll probably have to look into that a little bit further.Another difference in our settings was kerberos. We don’t have any mentioning of that on our server. Is that necessary?
-
It seems that you don’t have the rights configured. I also forgot one other security setting in the above post.
[ATTACH=full]756[/ATTACH]
[ATTACH=full]759[/ATTACH]
Make sure you do this for C:\images, and C:\images\dev
I will add for future reference.
[B][SIZE=14px][FONT=sans-serif][COLOR=#252525]Kerberos[/COLOR][/FONT][/SIZE][/B][SIZE=14px][FONT=sans-serif][COLOR=#252525][URL=‘http://en.wikipedia.org/wiki/Help:IPA_for_English’][COLOR=#0b0080]/[/COLOR][/URL][URL=‘http://en.wikipedia.org/wiki/Help:IPA_for_English#Key’][COLOR=#0b0080]ˈ[/COLOR][/URL][URL=‘http://en.wikipedia.org/wiki/Help:IPA_for_English#Key’][COLOR=#0b0080]k[/COLOR][/URL][URL=‘http://en.wikipedia.org/wiki/Help:IPA_for_English#Key’][COLOR=#0b0080]ɛər[/COLOR][/URL][URL=‘http://en.wikipedia.org/wiki/Help:IPA_for_English#Key’][COLOR=#0b0080]b[/COLOR][/URL][URL=‘http://en.wikipedia.org/wiki/Help:IPA_for_English#Key’][COLOR=#0b0080]ər[/COLOR][/URL][URL=‘http://en.wikipedia.org/wiki/Help:IPA_for_English#Key’][COLOR=#0b0080]ə[/COLOR][/URL][URL=‘http://en.wikipedia.org/wiki/Help:IPA_for_English#Key’][COLOR=#0b0080]s[/COLOR][/URL][URL='http://en.wikipedia.org/wiki/Help:IPA_for_English’][COLOR=#0b0080]/[/COLOR][/URL][/COLOR][/FONT][/SIZE][SIZE=14px][FONT=sans-serif][COLOR=#252525] is a [/COLOR][/FONT][/SIZE][URL=‘http://en.wikipedia.org/wiki/Computer_network’][SIZE=14px][FONT=sans-serif][COLOR=#0b0080]computer network[/COLOR][/FONT][/SIZE][/URL][URL=‘http://en.wikipedia.org/wiki/Authentication’][SIZE=14px][FONT=sans-serif][COLOR=#0b0080]authentication[/COLOR][/FONT][/SIZE][/URL][URL='http://en.wikipedia.org/wiki/Cryptographic_protocol’][SIZE=14px][FONT=sans-serif][COLOR=#0b0080]protocol[/COLOR][/FONT][/SIZE][/URL][SIZE=14px][FONT=sans-serif][COLOR=#252525] which works on the basis of ‘tickets’ to allow [/COLOR][/FONT][/SIZE][URL=‘http://en.wikipedia.org/wiki/Node_(networking)’][SIZE=14px][FONT=sans-serif][COLOR=#0b0080]nodes[/COLOR][/FONT][/SIZE][/URL][SIZE=14px][FONT=sans-serif][COLOR=#252525] communicating over a non-secure network to prove their identity to one another in a secure manner. Its designers aimed it primarily at a [/COLOR][/FONT][/SIZE][URL=‘http://en.wikipedia.org/wiki/Client–server’][SIZE=14px][FONT=sans-serif][COLOR=#0b0080]client–server[/COLOR][/FONT][/SIZE][/URL][SIZE=14px][FONT=sans-serif][COLOR=#252525] model and it provides [/COLOR][/FONT][/SIZE][URL=‘http://en.wikipedia.org/wiki/Mutual_authentication’][SIZE=14px][FONT=sans-serif][COLOR=#0b0080]mutual authentication[/COLOR][/FONT][/SIZE][/URL][SIZE=14px][FONT=sans-serif][COLOR=#252525]—both the user and the server verify each other’s identity. Kerberos protocol messages are protected against [/COLOR][/FONT][/SIZE][URL=‘http://en.wikipedia.org/wiki/Computer_insecurity#Eavesdropping’][SIZE=14px][FONT=sans-serif][COLOR=#0b0080]eavesdropping[/COLOR][/FONT][/SIZE][/URL][SIZE=14px][FONT=sans-serif][COLOR=#252525]and [/COLOR][/FONT][/SIZE][URL=‘http://en.wikipedia.org/wiki/Replay_attack’][SIZE=14px][FONT=sans-serif][COLOR=#0b0080]replay attacks[/COLOR][/FONT][/SIZE][/URL][SIZE=14px][FONT=sans-serif][COLOR=#252525].[/COLOR][/FONT][/SIZE]
[SIZE=14px][FONT=sans-serif][COLOR=#252525]~[URL=‘http://en.wikipedia.org/wiki/Kerberos_(protocol)’]Wiki[/URL][/COLOR][/FONT][/SIZE][url=“/_imported_xf_attachments/0/756_Security 2.png?:”]Security 2.png[/url][url=“/_imported_xf_attachments/0/759_Security 2.png?:”]Security 2.png[/url]
-
Hi,
I have those security in place, but that didn’t solve the problem
At this moment I’m stuck at the following stage:- Checking Mounted File System … Done
- Using image blablabla
- Looking for Hard Disks …Done
- Using Hard Disk : /dev/sda
- Preparing bakcup location …Done
#####################################
An error has been detected!
#####################################
Unable to create /images/001aa0…
-
Open Terminal or SSH into your fog server…
Then mount the NFS if not done so already.
cd to the mounted folder. In my example it would be /images2
Just do a quick [CODE]sudo nano test.txt[/CODE]. Edit the file type in anything and save.
Then jump on to the windows machine and see if the file exists. Then create a folder using the windows machine.
See if you can see the folder in linux.[B]If you have any issues with this then there is a security/sharing/permissions setting that is incorrect.[/B]
-
Well, I can’t create or change anything in the mounted folder.
So it seems I’m struggling with a security/sharing/permission setting.I’m off to find some more information about NFS and sharing issues between Linux & Windows.
-
I’ve found the solution!
I followed the procedure at this site: [url]http://virtuallyhyper.com/2012/06/configure-windows-2008-nfs-share-vmware-esx/[/url]
and now everything works. -
[quote=“David Van Uffelen, post: 27291, member: 21873”]I’ve found the solution!
I followed the procedure at this site: [url]http://virtuallyhyper.com/2012/06/configure-windows-2008-nfs-share-vmware-esx/[/url]
and now everything works.[/quote]That’s a nice guide it’s choked full of information! Thanks for sharing this with us!
-
Can you upload an image and then reupload on top of it? The case being to update the original image? or is that still untested.
-
Just a quick status update (and closure).
To answer Wolfbane8653: yes, it was possible. Everything worked.
I got everything working on the day that FOG released version 1.0.1
I think I was still high of the sweet victory, when I (later that same day) decided to ditch 0.32 and go for version 1.0.1
So I got version 0.32 to work and it was fully tested, but it has never been used.Instead I deployed version 1.0.1 and started from scratch again (I didn’t have any other option because the update messed up the whole system).
I ran into some new problems, but fortunatly the error messages in 1.0.1 are a little bit more detailed so I could fix everything. Since yesterday our new (international) FOG environment is ready to deploy. For those interested I will give a summary of our FOG configuration.Thank you all for your support. I will try to keep in touch on this forum, and don’t forget to have fun with FOG!
Our company FOG setup:
General network: we have multiple locations (in Belgium and The Netherlands) we are all connected in one big network.
Thanks to FOG we are now able to auto-install any computer on our network, no matter where they are.Location: Antwerp. This is our main site. The (one and only) FOG server is hosted here and the PXE boot-service comes from that server. This is a virtual ubuntu 12.10 that runs on VMWare. We also have a Windows 2008 server located here that functions as a storage node. The reason behind this is because of the backup. Backups are made on tape and our tapedrives / software are not supported in Linux.
Location: Schiphol. This is one of our two main sites in The Netherlands. A Windows 2008 server functions as a storage node. It is equiped with a tapedrive and makes a weekly backup.
Location: Amsterdam. This is the second main site in The Netherlands and has not yet been configured. This will probably become a virtual windows 2008 server, with backup possibilities on tape.
-
I tweaked a few more settings with the info you provided and mine is working correctly now also. Images upload on top of each other with out issues and this works perfectly.
[B]No need for purchased software! I love opensource![/B]
-
This is an interesting thread to me as it shows the flexibility of FOG. While cumbersome, it CAN be “ported” to run on nearly any OS.
-
As a quick update I have added this into the wiki “How-To-Guides”
[url]http://www.fogproject.org/wiki/index.php/Windows_Storage_Node[/url]
