Errors trying to upload an image to FOG
-
Hello Fog, ive got a problem…
I’ve installed FOG v32 (v0.32) server on Ubuntu 12.04 kernal: 3.11.0-17.31~precise1.
Every works fine except two things…First of all i have to do when i restart my Ubuntu computer:
Sudo stop tftpd-hpa
sudo start tftpd-hpa
Because els i wont start, is there an easy fix for this? Or do i have to make a script?As second, when i want to upload a image of HP Prodesk 400 G1 SFF
The computer comes in the menu of FOG, i’ve tested every option out but he can’t upload a image…The FOG tried manually to add him as Hosts like normaly, it doesn’t recognis the MAC addres of the HP Prodesk.
when i would like to register the HP Prodesk in the FOG menu it says this:
Menu ill select: Perform full host registration and inventroy.[0.595318] tps65010: no chip?
[0.597110] pnp 00:06: can’t evaluate CRS: 12311
[0.842298] acpiphp_ibm: ibm_acpiphp_unit: acpi_walk_namespace failed
[0.842486] Could not find carillo Ranch MCH device
[0.842652] uvesafb: failed to execute /sbin/v86d
[0.842775] uvesafb: make sure that the v86 helper is installed and executale
[0.842701] uvesafb: getting VBE info block failed (cax=0x4f00, err=-2)
[0.842726] uvesafb vbe init () failed with -Z2
[1.723757] drm/i810 does not support SMP
After that much things what come up what aren;t that emported i think…It getting stuck at this:
[2.829988] CR2: 00000000000000If you can help me? I would be thank full!!
-
The tftp-hpa startup issue has been talked about quite a lot across the forums. There is a fix.
To fix your issue, try my kernel:
[url]https://mastacontrola.com/fogboot/kernel/bzImage32[/url]
-
Thank you! I wil try to fix it!
-
Might be a stupid question… But how do i have to install this kernal (first Linux server)…
Thank you for you time already…! -
You will need to copy the kernel to the server and place it in /tftpboot/fog/kernel
Then set the kernel for either that individual host or all hosts(fog settings page).
-
Oke done! Thank you guyz! Im further!
But the host manager doenst recognise the MAC of HP…
[IMG]http://s28.postimg.org/8eacn93nx/2014_03_11_16_06_27.jpg[/IMG]
Problem at the moment…
-
You’re not using the kernel I gave you.
You’re currently, if I’m reading the picture correctly, using 2.6.39_1_FOG_CORE kernel.
To use my kernel, try these commands on your fog server:
[code]cd /tftpboot/fog/kernel
mv bzImage bzImage.orig.2014MAR11
wget --no-check-certificate https://mastacontrola.com/fogboot/kernel/bzImage32 -O bzImage
[/code]Reboot the system you’re seeing the panic on.
-
Oooops… Oke, i have to shutdown first my DHCP server…
I have to fix that first, ill be back. Day after tomorrow! Fine evening!An other problem came up… Unfortunately.
-
I’m back!
This is the problem at the moment…
[IMG]http://s8.postimg.org/u16g6vz2d/2014_03_12_14_51_55.jpg[/IMG]
pic01
Than it moves on after a min somthing like that!
After pic01 it move on to pic02.
[IMG]http://s22.postimg.org/43c13xbw1/2014_03_12_15_14_28.jpg[/IMG]
pic02
I tried other things to in the fog manager, but i cant find out what it realy is…Than it goes imaging anyway… and than i says this:
[IMG]http://s18.postimg.org/5eejz7wop/2014_03_12_15_21_30.jpg[/IMG]
pic04Kernal from fog what you said i did!
[IMG]http://s14.postimg.org/7blkk23m9/2014_03_13_10_27_41.jpg[/IMG]
Hope you guys can help me!
-
Set your image type to multiple partition.
Sounds like the drive you are trying to image has more than one partition on it.
-
That was a little of the problem but thank you!
I’ve second harddisk there was the problem Linux isn;t that easy what i tought.I imaged a computer deploy of the image isn;t working at the moment but i will try to fix it first!
-
Know i have fixed the problem with .mntcheck!
Now i can make an image en give out an image, only the problem is at this moment he wont resize it again to 150 GB theres a notification that i have to do in CMD (as admin) chkdsk /f.
I’ve done this a couple times and still it wont work.If sombody have an idea? I would be happy!
-
I normally use a Gparted live CD to extend my os to the end of the DISK, with Windows there is a command in the sysprep Unattend.xml file that can extend the OS. I am not familiar with doing this in linux without using a tool.
-
Hello Jaymes!
Thank you for the hint! im gone try it but at this moment Full size images works!
I have a couple computers left whats have to been imaged because of Windows XP…
For now i’m help out! Thank you very much forum guyz! -
Would there be any issue using this kernel with FOG 1.2.0?
-
No, All of the kernels you use and see are usable across the board.
