powershell snapin no output, non error

[lebrun78]

@Tom-Elliott
Yes Tom, I agree,
That’s why JJ-Fullmer create a task executed as user administrator to modify the boot order.
I have a powershell problem, to how to create a task trigger at the creation of the task

[Tom Elliott]

@lebrun78 If the snapin is part of the host, on deploy it should automatically create the snapin task.

The issue, as I’m seeing it, is that the system user is what would run that snapin through the FOG Client. If there’s indeed security to prevent the system user from running the boot order/uefi update process as you’re intending, this is part of the problem.

Again, I’m not certain this is actually the case, just it seems like a potential reason for the issue.

[JJ Fullmer]

@lebrun78 It should still be creating that log file of C:\temp\firmware.log
What does that log say after running this?

[lebrun78]

@JJ-Fullmer
No log film created.
Task created as you proposed require administrator login to be executed. That is not the purpose of the snapin.
But I have no idea how to work around the problem

@Tom-Elliott
Do you have any idea how to keep pxe boot with eufi Windows ?

If I have to get up from my chair every time I have to deploy, that’s no big deal.

[JJ Fullmer]

@lebrun78 As I mentioned that method would only work if the admin is logged in. If you’re running this at deploy time and have other firstlogoncommands that run via an unattend.xml file then it would work when the computer is first imaged to change the boot order back to pxe boot first.

There is a feature request that’s being considered for making it so the fogclient can handle changing the boot order, but no idea when there will be the time for that to be implemented. You’re welcome to fork that repo and give it a go

Personally I made an internal powershell module that queues the image using the FogApi powershell module (see my signature) and runs a remote powershell command on the machine I’m imaging to download the latest ipxe.efi (or snponly.efi) and I set that as the bootfile (I find it hard to match the network boot option as it’s labeled different on different platforms in my environment, but booting directly to the efi boot file always works).

[JJ Fullmer]

@lebrun78 Had another idea.
Since it does work with the system account in the psexec shell you try the scheduled task method again and have it use the system account. It would look something like below

Also, matching just ‘IPV4’ from the firmware boot options may not yield the most reliable results as not every device will name their network boot option like that. Another option that may work would be finding what your various models do use for pxe identification and script finding that one within this script, that would take some effort to maintain but would always get you the options you want
Another possibility is finding all possible choices and putting them all above the windows boot manager. For example, I have a custom built pc that has 3 options related to network boot (excluding ipv6) options, I could find each of those guids and put them all at the top of the list so each one will be tried at boot. I altered the script below to use that method matching the things I found in a couple places (‘IPV4’, ‘Network’, ‘pxe’) and I switched the matching up using a method I found here https://stackoverflow.com/questions/16903460/bcdedit-bcdstore-and-powershell to parse the enum of firmware into a powershell object, it’s not a perfect conversion to an object but it’s workable.

Another other option would be to get the tftpboot pxe files locally and add them to the efi partition and have it try a couple known ones, this method would work nicely as well especially on devices that don’t have built-in ethernet as they won’t have to support pxe boot to get to the bootfile that will get you into fog. But to make that work in a way that would support multiple pxe boot file options is a bit out of scope of this post.

#start the task 10 seconds after its defined
$trigger = New-ScheduledTaskTrigger -Once -at ((Get-date).AddSeconds(10))
$settings = New-ScheduledTaskSettingsSet -WakeToRun -Priority 0;
#make sure temp path exists, and use temp path to avoid issues with permissions on root of C
if (!(Test-Path 'C:\temp')) { mkdir 'C:\temp'; }
#use system account
$principal = New-ScheduledTaskPrincipal -UserId 'NT AUTHORITY\SYSTEM' -RunLevel Highest -LogonType ServiceAccount;
$sb = {
    $Configs   = New-Object -TypeName System.collections.generic.List['System.Object']
    $NameArray = @()
    $Pattern = '^(?<name>[a-z]*)?\s*(?<value>.*)?$'
    $firmware = (bcdedit /enum firmware);
    foreach ($item in $firmware ){
        if ( $item.trim() ){
            $res = [regex]::matches( $item, $pattern )
            if ( $res ){
                $Value = $res[0].Groups['value'].value
                $Name  = $res[0].Groups['name'].value
                if ( $Value ){
                    if ( $Name ){
                        "$item creating pso" | out-host;
                        $PSO = [PSCustomObject]@{
                            Name  = $Name
                            Value = $Value
                        }
                        $NameArray += $PSO
                    } else {
                        if ( $NameArray.count ){
                            ( $NameArray | Select-Object -last 1 ).Value += "; $Value"
                        }
                    }
                }
            }
        } else {
            if ( $NameArray ){
                $Configs.add(($NameArray))
                $NameArray = @()
            } 
        }
    }
    #the above loop from the example I found doesn't add the final item, so run this bit one more time
    if ( $NameArray ){
        $Configs.add(($NameArray))
        $NameArray = @()
    } 
    $netbootsipv4 = $configs | Where-Object { $_.Value[-1] -match "Network" -OR $_.Value[-1] -match "PXE" -OR $_.Value[-1] -match "IPV4" } | Where-Object { $_.Value[-1] -notmatch "IPV6" }
    #loop through the found netboot options and put each one at the top so all of them are before windows boot
    $result = New-Object -TypeName System.collections.generic.List['System.Object']
    $netbootsipv4 | ForEach-Object {
        $GUID = $_.Value[0];
        $bootOption = "Adding Desc: $($_.Value[1]) GUID: $GUID to boot first";
        $addBootToTop = (bcdedit /set "{fwbootmgr}" displayorder $GUID /addfirst);
        $result.add($bootOption);
        $result.add($addBootToTop);
    }
    #now that for sure all pxe boot options are first boots, try to find the active connection that matches and make it for sure the first boot option
    $upNets = (get-netadapter | Where-Object status -eq up).InterfaceDescription
    $upNets | ForEach-Object {
        #set the current item to a variable
        $adapterName = $_;
        #see if the active adapter's description matches any of the found ipv4 boot options
        $adapterBootEntry = $netbootsipv4 | Where-Object { $_.Value[-1] | Select-String -pattern $adapterName -SimpleMatch}
        if ($adapterBootEntry) {
            $guid = $adapterBootEntry.Value[0]
            $bootOption = "This interface is active, put it towards the top - Adding Desc: $($_.Value[1]) GUID: $GUID to boot first";
            $addBootToTop = (bcdedit /set "{fwbootmgr}" displayorder $GUID /addfirst);
            $result.add($bootOption);
            $result.add($addBootToTop);
        }
    }
    
    $newBootOrder = (bcdedit /enum "{fwbootmgr}");
    #make c:\temp if it doesn't exist
    if (!(Test-Path 'C:\temp')) { mkdir 'C:\temp'; }
    #log everything in a new C:\temp\firmware.log file
    $resultString = "Firmware: $($firmware | out-string)`n`nresult: $($result | out-string)`n`nNewBootOrder: $newBootOrder`n"
    New-Item -path C:\temp\firmware.log -itemType File -value $resultString -force;
}
$netBootScript = "C:\temp\netboot.ps1";
New-Item $netBootScript -value $sb.tostring() -force;
$action = New-ScheduledTaskAction -Execute "C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe" -Argument "-File 'C:\temp\netboot.ps1'"
$task = New-ScheduledTask -Action $action -Description "update bcd" -Principal $principal -Trigger $trigger -Settings $settings;
$taskName = "boot-to-IPV4";
#register the task
Register-ScheduledTask -InputObject $task -TaskName $taskName;
# force the task to start
Start-ScheduledTask -TaskName $taskName;
# wait for the task to finish
while ((Get-ScheduledTask $taskName).State -eq 'Running') {
    Start-Sleep -Seconds 1;
}
#delete the task
Unregister-ScheduledTask -TaskName $taskName -Confirm:$false -EA 0;
#delete the created script file
remove-Item $netBootScript -force -ea 0;

I saved the above as a .ps1 file and made it a snapin and it worked for me when I tested it on a vm. However, it did make it so when fog booted to the hard disk via refind it wasn’t able to boot into windows. This may be related to my own custom configs in refind, but something to test for on a few different platforms to be on the safe side.
Wait wait, I made a small change to the logging and updated the snapin and then it didn’t work the second time. That’s odd… I recreated and couldn’t get it to work a second time. There’s something weird going on for sure. I know I double checked that things were not already configured to boot to the network the time it did work.
Granted, since it’s happening via scheduled task, if you have an AD environment you could deploy this script in a scheduledTask via a gpo. Add the file (the one created from the $sb in the script) to computers with file preferences and create the scheduled task that runs as the system account using a scheduled task gpo.

Will have to dig more into this on why the script isn’t doing anything via snapin, maybe @Sebastian-Roth can help a bit on troubleshooting the client side. And maybe other @testers could test using this script as a snapin too to see what results are being had elsewhere.

Then just as an fyi to anyone reading this, you can revert back to the normal windows boot manager with (bcdedit /set "{fwbootmgr}" displayorder "{bootmgr}" /addfirst);

[nathan67]

@lebrun78
Have you found a solution to your problem?
I have the same problem with bcdedit via a snapin.

[nathan67]

This post is deleted!

[JJ Fullmer]

@nathan67

I’m just going to put these right here

https://fogapi.readthedocs.io/en/latest/commands/Set-WinToBootToPxe/

https://github.com/darksidemilk/FogApi/blob/master/FogApi/Public/Set-WinToBootToPxe.ps1

Not an answer to the snapin issue with bcdedit, but I have published a powershell function within the FogApi module for managing the bcdedit commands and setting a host to boot ot pxe.

I did just test it as a snapin with a simple script like this:

#registery the psgallery repository and trust it
Register-PSRepository -Default -ea 0;
Set-PSRepository -Name PSGallery -InstallationPolicy Trusted;
#install the fogapi module from the gallery
install-module fogapi -Repository PSGallery -ea 0 -Confirm:$false -Force -Scope AllUsers;
#run command to set pxe boot
Set-WinToBootToPxe;

But when run as a snapin it still isn’t working, run manually on a machine it does work.

I’m not sure yet why the command run in the context of a snapin doesn’t work.

[JJ Fullmer]

@nathan67 @lebrun78

When I configured the snapin with my example script that installs the FogApi Module and runs the universal command with the snapin setup with “powershell x64” like this

The snapin worked as expected and the host boots to pxe. I only tested this snapin method on a VM so far but I imagine it will work beyond that.