Latest FOG 0.33b

Timelord83 · Nov 17, 2013, 3:40 AM

What Version and distro are you using this 0.33b on? i’d love to try it out.

falko · Nov 17, 2013, 3:41 AM

I use Ubuntu Server 10.04.04

Tom Elliott · Nov 17, 2013, 12:33 PM

I run CentOS 6.4.

Timelord83 · Nov 18, 2013, 4:46 PM

[quote=“Tom Elliott, post: 19909, member: 7271”]I run CentOS 6.4.[/quote]

I cannot get it to install on a fresh copy of 6.4… It gets down to checking package htmldoc and fails it has several other warning further up but seems to get past them… attached is my full install log.

[url=“/_imported_xf_attachments/0/442_foglog.txt?:”]foglog.txt[/url]

Tom Elliott · Nov 18, 2013, 5:55 PM

Make sure you install the elrepo repository for htmldoc.

Timelord83 · Nov 18, 2013, 6:28 PM

[quote=“Tom Elliott, post: 19915, member: 7271”]Make sure you install the elrepo repository for htmldoc.[/quote]

The noob in me says… “Wat” but i’ll google and see what its all about.

so i followed the direction here [url]http://elrepo.org/tiki/tiki-index.php[/url] while under root. didn’t seem to do anything for the public key import but the RPM install made noise but the installer still failed.

[CODE][fogtech@CentFog ~]$ su
Password:
[root@CentFog fogtech]# cd fog_0.33b
[root@CentFog fog_0.33b]# cd bin
[root@CentFog bin]# ./installfog.sh

  ..#######:.    ..,#,..    .::##::.

.:###### .:;####:…;#;…
…##… …##;,;##::::.##…
,# …##…##:::## …::
## .::###,##. . ##.::#.:######::.
…##:::###::…#. … .#…#. #…#:::.
…:####:… …##…##::## … #
# . …##:,;##;:::#: … ##…
.# . .:;####;::::.##:::;#:…
# …:;###…

###########################################

FOG

Free Computer Imaging Solution

http://www.fogproject.org/

Developers:

Chuck Syperski

Jian Zhang

Peter Gilchrist

GNU GPL Version 3

###########################################

Version: 0.33BETA Installer/Updater

What version of Linux would you like to run the installtion for?

      1) Redhat Based Linux (Redhat, Fedora, CentOS)
      2) Debian Based Linux (Debian, Ubuntu, Kubuntu, Edubuntu)

Choice: [1]1

Staring Redhat / Fedora / CentOS Installation.

FOG Server installation modes:
* Normal Server: (Choice N)
This is the typical installation type and
will install all FOG components for you on this
machine. Pick this option if you are unsure what to pick.

  * Storage Node: (Choice S)
      This install mode will only install the software required
      to make this server act as a node in a storage group

More information:
http://www.fogproject.org/wiki/index.php?title=InstallationModes

What type of installation would you like to do? [N]

What is the IP address to be used by this FOG Server? [172.16.43.134]10.10.10.10

Would you like to setup a router address for the DHCP server? [Y/n] n

Would you like to setup a DNS address for the DHCP server and client boot image? [Y/n] n

Would you like to change the default network interface from eth0?
If you are not sure, select No. [y/N]n

Would you like to use the FOG server for DHCP service? [Y/n] y

This version of FOG has internationalization support, would
you like to install the additional language packs? [y/N] n

#####################################################################

FOG now has everything it needs to setup your server, but please
understand that this script will overwrite any setting you may
have setup for services like DHCP, apache, pxe, tftp, and NFS.

It is not recommended that you install this on a production system
as this script modifies many of your system settings.

This script should be run by the root user on Fedora, or with sudo on Ubuntu.

Here are the settings FOG will use:
Base Linux: Redhat
Detected Linux Distribution: CentOS
Installation Type: Normal Server
Server IP Address: 10.10.10.10
DHCP router Address:
DHCP DNS Address:
Interface: eth0
Using FOG DHCP: 1
Internationalization: 0

Are you sure you wish to continue (Y/N) y

Installation Started…

Installing required packages, if this fails
make sure you have an active internet connection.

Packages to be installed: httpd php php-cli php-common php-gd php-mysql mysql mysql-server dhcp tftp-server nfs-utils vsftpd net-tools wget xinetd tar gzip make m4 gcc gcc-c++ htmldoc perl perl-Crypt-PasswdMD5 lftp clamav
Skipping package: httpd (Already installed)
Skipping package: php (Already installed)
Skipping package: php-cli (Already installed)
Skipping package: php-common (Already installed)
Skipping package: php-gd (Already installed)
Skipping package: php-mysql (Already installed)
Skipping package: mysql (Already installed)
Skipping package: mysql-server (Already installed)
Skipping package: dhcp (Already installed)
Skipping package: tftp-server (Already installed)
Skipping package: nfs-utils (Already installed)
Skipping package: vsftpd (Already installed)
Skipping package: net-tools (Already installed)
Skipping package: wget (Already installed)
Skipping package: xinetd (Already installed)
Skipping package: tar (Already installed)
Skipping package: gzip (Already installed)
Skipping package: make (Already installed)
Skipping package: m4 (Already installed)
Skipping package: gcc (Already installed)
Skipping package: gcc-c++ (Already installed)
Installing package: htmldoc
Error: Nothing to do
Skipping package: perl (Already installed)
Skipping package: perl-Crypt-PasswdMD5 (Already installed)
Skipping package: lftp (Already installed)
Installing package: clamav
Error: Nothing to do

Confirming package installation.

Checking package: httpd…OK
Checking package: php…OK
Checking package: php-cli…OK
Checking package: php-common…OK
Checking package: php-gd…OK
Checking package: php-mysql…OK
Checking package: mysql…OK
Checking package: mysql-server…OK
Checking package: dhcp…OK
Checking package: tftp-server…OK
Checking package: nfs-utils…OK
Checking package: vsftpd…OK
Checking package: net-tools…OK
Checking package: wget…OK
Checking package: xinetd…OK
Checking package: tar…OK
Checking package: gzip…OK
Checking package: make…OK
Checking package: m4…OK
Checking package: gcc…OK
Checking package: gcc-c++…OK
Checking package: htmldoc…Failed!
[/CODE]

Jaymes Driver · Nov 18, 2013, 7:06 PM

it is a repository for HTMLdoc hosted and distributed by the Elrepo group.

alternatively, there are posts about the problem you are experiencing, pertaining specifically to CentOS, you can find SOME documentation (not much, it would be nice if someone familiar in CentOS would do a write up of full installation for noobs like we have with Ubuntu) here on the forums.

this works for CentOs 6.2 should work for 6.4 as well, this uses RPMforge instead of elrepo.

[LIST]
[]wget [url]http://pkgs.repoforge.org/rpmforge-release/[/url][URL=‘http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm’]rpmforge-release-0.5.3-1.el6.rf.x86_64.rpm[/URL]
[]rpm -i [URL=‘http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm’]rpmforge-release-0.5.3-1.el6.rf.x86_64.rpm[/URL]
[*]yum install htmldoc
[/LIST]

Timelord83 · Nov 18, 2013, 11:06 PM

[quote=“Jaymes Driver, post: 19917, member: 3582”]it is a repository for HTMLdoc hosted and distributed by the Elrepo group.

alternatively, there are posts about the problem you are experiencing, pertaining specifically to CentOS, you can find SOME documentation (not much, it would be nice if someone familiar in CentOS would do a write up of full installation for noobs like we have with Ubuntu) here on the forums.

this works for CentOs 6.2 should work for 6.4 as well, this uses RPMforge instead of elrepo.

[LIST]
[]wget [url]http://pkgs.repoforge.org/rpmforge-release/[/url][URL=‘http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm’]rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm[/URL]
[]rpm -i [URL=‘http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm’]rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm[/URL]
[*]yum install htmldoc
[/LIST]
[/quote]
thank you for the reply. The middle command did not work but the first and last did and it appears to be downloaded and running but i am still getting errors… the DHCP service isn’t starting.
[CODE][root@CentFog usr]# cd /home/fogtech/fog_0.33b/bin
[root@CentFog bin]# ls
installfog.sh
[root@CentFog bin]# ./installfog.sh

  ..#######:.    ..,#,..    .::##::.

.:###### .:;####:…;#;…
…##… …##;,;##::::.##…
,# …##…##:::## …::
## .::###,##. . ##.::#.:######::.
…##:::###::…#. … .#…#. #…#:::.
…:####:… …##…##::## … #
# . …##:,;##;:::#: … ##…
.# . .:;####;::::.##:::;#:…
# …:;###…

###########################################

FOG

Free Computer Imaging Solution

http://www.fogproject.org/

Developers:

Chuck Syperski

Jian Zhang

Peter Gilchrist

GNU GPL Version 3

###########################################

Version: 0.33BETA Installer/Updater

What version of Linux would you like to run the installtion for?

      1) Redhat Based Linux (Redhat, Fedora, CentOS)
      2) Debian Based Linux (Debian, Ubuntu, Kubuntu, Edubuntu)

Choice: [1]1

Staring Redhat / Fedora / CentOS Installation.

FOG Server installation modes:
* Normal Server: (Choice N)
This is the typical installation type and
will install all FOG components for you on this
machine. Pick this option if you are unsure what to pick.

  * Storage Node: (Choice S)
      This install mode will only install the software required
      to make this server act as a node in a storage group

More information:
http://www.fogproject.org/wiki/index.php?title=InstallationModes

What type of installation would you like to do? [N]

What is the IP address to be used by this FOG Server? [172.16.43.134]10.10.10.10

Would you like to setup a router address for the DHCP server? [Y/n] b
Invalid input, please try again.