Clear block out of boundary
-
I wanted to do capture task on a 2015 22 inch imac.
I used exactly the guide from this fos-usb 2a guide.https://forums.fogproject.org/topic/7727/building-usb-booting-fos-image/21?lang=en-US&page=2
Everything works smoothly until it reads the second paritition with a cryptic message on partclone
-
Here is the image
-
Is there a disk structure check for the mac. It appears there is an issue with that partition.
-
@george1421 does your hypothesis implying the problem is a possible bad sector on the internal hard drive?
The golden master is 1tb guid partition scheme with main os formated in afps
The first successful partition to capture is the efi partition since it is only 200mb in size.
The setting in the fog web interface is a MacOS image, single disk all partition unresizeable. And compressed with zstd.
My other concern is the fog server storage since it has around 860gigs available space where it capturing a whole 1tb of golden master drive
-
@saftkartoffel If I understand the message partclone is at the point of trying to calculate how to shrink the disk before image capture. IMO it has detected a problem with the disk. It can’t say why but other than generate an error. So to my question does the mac OS have something like the linux
fsckcommand to check and ensure the disk structure is OK?If the shrinking of the partition is the problem you can try single disk non-resizable and it may get past this error but then you won’t be able to deploy this image to a computer with a smaller hard drive.
-
@george1421 yes it does, I can access disk utility from recovery and run the first aid tool for the whole disk
-
@saftkartoffel said in Clear block out of boundary:
The setting in the fog web interface is a MacOS image, single disk all partition unresizeable. And compressed with zstd.
My other concern is the fog server storage since it has around 860gigs available space where it capturing a whole 1tb of golden master driveOk you are already using non-resizable so its not at the point of calculating how to shrink the disk. I would run the structure check just to be sure.
As for disk size zstd will help here. Set your compression level to 11 if its not at least 11 this will help. If you use the standard compression ratio of 1.6 that 1TiB disk should fit onto the fog server at 625GB. Now that assumes your hard drive is 100% full of data with no free space. zstd should be able to compress better than 1.6:1 compression as well as I bet your 1TiB hard drive is not 100% full. So 800GB should be more than enough.
-
@george1421 well it kills my joy and hope after seeing the partclone part
I guess i’ll try the structure check tomorrow
Thank you for the advice george. I’ll update the results tommorow -
crap I think it gotta do with the AFPS file format
https://sourceforge.net/p/clonezilla/support-requests/98/?page=1
It is a known issues on partclone itself with AFPS file format.
-
@saftkartoffel Looking through that link, some things come to mind.
- The fog project is using the latest partclone so if there is a fix it should be in there, but based on your linked article its probably not.
- Something else popped out, is this disk using any type of encryption? In a typical system the efi partition is not encrypted but the OS partition will be. The efi partition loads the drivers needed to decrypt the OS disk.
First let me say I don’t know apple computers. But this system has been around for 5 years and it probably not running the latest OS. Have you ever been able to clone this type of computer before with FOG? My question is around is the problem computer specific, model specific or all apples are this way? I know other organizations clone apple computers with FOG, so what makes this computer that unique?
-
@saftkartoffel While it’s ugly in terms of speed and image size you can use image type RAW to capture I am sure.
I know this is not great but Apple is doing many things to prevent people from imaging their machines and there is not much we can do about it unless you are keen enough to dive into the code…
-
@Sebastian-Roth does raw capture supports multicasting?
-
@george1421 unfortunately the os is the newest update a 10.15.6 macOS Catalina, I am trying the raw capture at the moment as the number of macs i need to prepare is more than 50. So I think albeit slow if raw capture works it still worth it
-
@saftkartoffel Yes sure you can multicast a raw image.
-
@saftkartoffel update, so I ended up capture raw image of the macos but it stuck on 95% when deploying the image.
So on the deployed mac, I rebooted it and it doesn’t boot normally and stuck on an apple logo. But the boot option is working so i tried booting into a install Catalina usb and choose recover from backup. Luckily I had a local time machine backup on the captured mac. Did the latest local backup restoration for around 15 minutes-ish and it worked and booted beautifully on macOS Catalina 10.15.6
-
@saftkartoffel When you say stuck, do you mean the byte/sector count in the blue partclone screen did not move any further? For how long did you wait? Did the speed figure go down to zero?
-
@Sebastian-Roth said in Clear block out of boundary:
@saftkartoffel When you say stuck, do you mean the byte/sector count in the blue partclone screen did not move any further? For how long did you wait? Did the speed figure go down to zero?
Left it overnight, in the morning the speed is getting lower if I remembered correctly but not to zero
What i meant stuck is the progress bar
-
@Sebastian-Roth said in Clear block out of boundary:
@saftkartoffel Yes sure you can multicast a raw image.
Well I got Fatal: error unknown request type :: Null
Got a quick fix? need to do the imaging asap
-
@saftkartoffel As I see you are using the USB boot stuff. Not part of the official FOG code but I am sure we can help you! Please post the complete grub configuration you have in
boot/grub/grub.cfgon your USB key. -
@saftkartoffel said in Clear block out of boundary:
Well I got Fatal: error unknown request type :: Null
Got a quick fix? need to do the imaging asapThis is one of the caveats of usb booting. You should reread the instructions for building the FOS Linux USB boot disk. It says that you MUST schedule the task first in the Web UI THEN select option 1 on the grub boot menu. If you don’t you will get the error about Unknown request type Null.
