0.00 iB of all images on server (not standard setup)

[Eruthon]

Hi,
I am struggling with this even after reading FTP troubleshooting and a few problems on forum.

My setup consits of:
Debian 10 system with virt-manager running:

1. Debian 10 main fog server (20GB) with storage node set to new “disabled” storage group I made
2. Debian 10 storage fog server (20GB) with second disk for images (2TB) mounted to /images folder set to “default” storage node

Additional info: I was upgrading from 1.2.0 to 1.5.9-RC2, so I used the guide on the wiki, just copied all the images from old server to the 2TB storage node disk, also changed permissions.

Any suggestions?

[george1421]

The simple answer is that value is ONLY set when the image is updated by the FOS Linux engine. If you copied over the images from the old FOG server and the then recreated the image definitions that field will be zero. Its a display value and not used in any way related to imaging.

[Eruthon]

Ok, so I found the solution: after I copied all the images on the main fog server with its new 2TB disk and making the main fog server as the master node and restarting the FOGImageSize service on the main server, the info about the images’ sizes on the server appeared in the webpage.