• Recent
    • Unsolved
    • Tags
    • Popular
    • Users
    • Groups
    • Search
    • Register
    • Login

    Error Restoring GPT Partition Tables

    Scheduled Pinned Locked Moved Unsolved
    FOG Problems
    4
    52
    4.6k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • T
      tlehrian
      last edited by

      (moving this to another thread so others might find it easier)

      I’m running an error stating that Restoring GPT Partition Tables failed (see pic).

      IMG_20190725_143623 (1).jpg

      This error is particularly annoying because it happens intermittently, not every time you try to image to a particular machine. This is on an HP Z2 G4 workstation with two M.2 drives installed. I have successfully imaged to these computers a few times already.

      Initial Reponse:

      We were able to track down an issue that sounds very similar last week. Find the details here: https://forums.fogproject.org/topic/13440/fog-1-5-6-auto-resize-is-unpredictable

      To try the fixed binaries download 64 Bit and 32 Bit and put those in /var/www/html/fog/service/ipxe/ dir on your FOG server. Probably good to rename the original ones instead of overwriting.

      1 Reply Last reply Reply Quote 0
      • T
        tlehrian
        last edited by

        I have downloaded the init files and will be trying another deploy in this lab today.

        1 Reply Last reply Reply Quote 0
        • T
          tlehrian
          last edited by

          After downloading the init files linked to previously, I get a kernel panic when attempting to image:

          IMG_20190807_084200.jpg

          The ACPI error has been cropping up before, but has never impeded an image. The kernel panic is new to these init files. Any ideas?

          Thanks
          Tim

          1 Reply Last reply Reply Quote 0
          • S
            Sebastian Roth Moderator
            last edited by

            @tlehrian With newer kernels/ints you need to manually change a settings. Go to the FOG web UI -> FOG Configuration -> FOG Settings -> FTP Server and increase KERNEL RAMDISK SIZE from 127000 to 275000. Then boot the client again and it should not throw the error anymore.

            Web GUI issue? Please check apache error (debian/ubuntu: /var/log/apache2/error.log, centos/fedora/rhel: /var/log/httpd/error_log) and php-fpm log (/var/log/php*-fpm.log)

            Please support FOG if you like it: https://wiki.fogproject.org/wiki/index.php/Support_FOG

            T 3 Replies Last reply Reply Quote 0
            • T
              tlehrian @Sebastian Roth
              last edited by

              @Sebastian-Roth Perfect. Thanks for the quick reply. Will do that.

              1 Reply Last reply Reply Quote 0
              • T
                tlehrian @Sebastian Roth
                last edited by tlehrian

                @Sebastian-Roth Still throwing the same error (original error…restoring the GPT partition tables, not the kernel panic).

                FYI the image is set up as a Multiple partition image - all disks (Not resizeable). The computer contains two M.2 drives: 1 512GB with several partitions for boot/OS (dual boot Linux/Windows), and another 256GB with two paritions (one ext4 and another ntfs). The OS on the image is set to Linux-50.

                1 Reply Last reply Reply Quote 0
                • T
                  tlehrian @Sebastian Roth
                  last edited by

                  @Sebastian-Roth The interesting thing is, the process seems to work every once in a while. I’m suspecting maybe the drives are being switched around and the process is trying to use the 256GB drive as the primary OS drive, when it won’t be large enough. Is there some sort of random or race condition that might cause that? I see an option in the host setup for “Host Primary Disk” - would that alleviate this issue?

                  Q george1421G 2 Replies Last reply Reply Quote 0
                  • Q
                    Quazz Moderator @tlehrian
                    last edited by

                    @tlehrian I believe this is a known problem that can occur when you have multiple NVME drives on a UEFI system as the numeration can change on reboot afaik.

                    T 1 Reply Last reply Reply Quote 0
                    • T
                      tlehrian @Quazz
                      last edited by

                      @Quazz Do you know of any solution to the issue?

                      Q 1 Reply Last reply Reply Quote 0
                      • Q
                        Quazz Moderator @tlehrian
                        last edited by

                        @tlehrian I don’t believe there’s a solution currently, just some thoughts on how to potentionally address it, but without access to relevant hardware there is no way to confirm which direction we have to take.

                        Related thread: https://forums.fogproject.org/topic/13163/laptop-with-2-nvme-drives-randomly-selected-so-selecting-one-drive-to-capture-not-working

                        T 1 Reply Last reply Reply Quote 0
                        • T
                          tlehrian @Quazz
                          last edited by

                          @Quazz Hmmmm… very interesting. I guess I’m OK that it seems to be a random thing. I can keeping booting until it finally, randomly, picks the right drive to be the primary. At least it doesn’t seem to be a larger HW issue. I’ll be looking for a solution to this issue if one does eventually pop up. Thanks for the quick reply.

                          1 Reply Last reply Reply Quote 0
                          • george1421G
                            george1421 Moderator @tlehrian
                            last edited by

                            @tlehrian said in Error Restoring GPT Partition Tables:

                            I’m suspecting maybe the drives are being switched around and the process is trying to use the 256GB drive as the primary OS drive, when it won’t be large enough.

                            Yes this is an issue we are tracking in the link Quazz provided. We are looking for someone with a little linux skills and a system with 2 nvme drives to help us debug. Are you that person?

                            Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG!

                            T 1 Reply Last reply Reply Quote 0
                            • T
                              tlehrian @george1421
                              last edited by

                              @george1421 Possibly. Unfortunately I have a small window of opportunity here where I could help test before we need to have all of our systems with two M2 drives up and running for our Fall semester (starting Aug 27). At that point, I’d no longer have any systems to play with.

                              george1421G 1 Reply Last reply Reply Quote 0
                              • george1421G
                                george1421 Moderator @tlehrian
                                last edited by

                                @tlehrian I’m hoping that with a short time of debugging (just less than an hour of on and off testing) will help us (hopefully) find a solution.

                                Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG!

                                T 1 Reply Last reply Reply Quote 0
                                • T
                                  tlehrian @george1421
                                  last edited by

                                  @george1421 Sure, I’d be happy to help where I can. After reading through the thread @Quazz shared, I guess I’m lucky that we’re trying to use the large NVME drive as our OS drive…

                                  george1421G 1 Reply Last reply Reply Quote 0
                                  • george1421G
                                    george1421 Moderator @tlehrian
                                    last edited by george1421

                                    @tlehrian Ok here is what we are seeing. When FOS Linux boots, the nvme drives initialize (become ready to the os) at different times. Sometimes drive A is ready first and other times drive B is ready first. Well when linux boots what ever drive inits first becomes /dev/nvme01 and the second one becomes /dev/nvme02. This is not an issue with FOG or linux, its an issue between the linux OS and the hardware.

                                    So what we need is to run a utility with a few commands to help us detect which drive is which in each state. The switch is totally at random so we can’t predict the order using linux. So what I need you (as a tester) to do is to pxe boot the target computer multiple times to record the settings when the drives are in a normal and then reversed order. If we are lucky you will see this swap within 10 pxe boots.

                                    Here is what I want you to do:

                                    1. Download this updated init from here: https://fogproject.org/inits/init_nvme-cli.xz
                                    2. Rename the original inits in `/var/www/html/fog/service/ipxe init.xz to init.xz.sav
                                    3. Move the downloaded file to that directory and save as init.xz
                                    4. Pick one of these dual drive nvme computers and schedule a deploy task to it. But before you hit the schedule task button tick the debug checkbox then schedule the task.
                                    5. PXE boot the target computer. After a few screens of text where you need to press enter to clear you will be dropped to the FOS Linux command prompt.
                                    6. At the FOS Linux command prompt run this command lsblk to note the size and order of the nvme disk. Use disk size to be your guide in determining the order. So this is state 1.
                                      6.1 You can use these steps if you want to setup remote debugging. Its easier to do the copy and paste of commands from putty. You don’t need to, its just one option.
                                      6.2 At the FOS Linux command prompt key in ip addr show and collect the IP address of the FOS Linux computer.
                                      6.3 Give root a password with passwd. Just give it a simple password like hello. The password will be reset on the next reboot. So don’t worry.
                                      6.4 From a windows computer use putty to ssh into the FOS Linux computer. Login as root and the password you created in step 6.3
                                    7. At the FOS Linux command prompt key in the following and post the results here nvme list. If the nvme command isn’t known then the downloaded inits are not in the right spot.
                                    8. Key in the following command and post the result(s) here nvme id-ctrl /dev/nvme0n1 -H and (I’m guessing at the name since I don’t have a dual nvme system, use the name from the lsblk command above) nvme id-ctrl /dev/nvme0n2 -H
                                    9. Now reboot the FOS Linux computer with ctrl-alt-del or key in reboot at the FOS Linux command prompt. The system should PXE boot right back into FOS Linux in debug mode.
                                    10. Use the lsblk command to determine the disk order. We are looks for the order of the drives when they switch places. If you can’t get them to switch then power off the system instead of rebooting to see if we can get them to switch. The key is to capture the output of the nvme command in both states.

                                    Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG!

                                    T 3 Replies Last reply Reply Quote 1
                                    • T
                                      tlehrian @george1421
                                      last edited by

                                      @george1421 Ok. I should have a chance to do this later today. I’m hopeful this leads to a fix for the issue.

                                      1 Reply Last reply Reply Quote 1
                                      • T
                                        tlehrian @george1421
                                        last edited by

                                        @george1421 Here is the information from State 1:

                                        State 1:
> nvme list

Node             SN                   Model                                    Namespace Usage                      Format           FW Rev
---------------- -------------------- ---------------------------------------- --------- -------------------------- ---------------- --------
/dev/nvme0n1     S499NX0M113634       SAMSUNG MZVLB256HAHQ-000H2               1           2.95  GB / 256.06  GB    512   B +  0 B   EXD71HAQ
/dev/nvme1n1     S498NA0M403426       SAMSUNG MZVLB512HAJQ-000H2               1         149.49  GB / 512.11  GB    512   B +  0 B   EXA71HAQ


> nvme id-ctrl /dev/nvme0n1 -H

NVME Identify Controller:
vid     : 0x144d
ssvid   : 0x144d
sn      : S499NX0M113634
mn      : SAMSUNG MZVLB256HAHQ-000H2
fr      : EXD71HAQ
rab     : 2
ieee    : 002538
cmic    : 0
  [2:2] : 0     PCI
  [1:1] : 0     Single Controller
  [0:0] : 0     Single Port

mdts    : 9
cntlid  : 4
ver     : 10200
rtd3r   : 186a0
rtd3e   : 7a1200
oaes    : 0
  [8:8] : 0     Namespace Attribute Changed Event Not Supported

oacs    : 0x17
 [15:4] : 0x1   Reserved
  [3:3] : 0     NS Management and Attachment Not Supported
  [2:2] : 0x1   FW Commit and Download Supported
  [1:1] : 0x1   Format NVM Supported
  [0:0] : 0x1   Sec. Send and Receive Supported

acl     : 7
aerl    : 7
frmw    : 0x16
  [4:4] : 0x1   Firmware Activate Without Reset Supported
  [3:1] : 0x3   Number of Firmware Slots
  [0:0] : 0     Firmware Slot 1 Read/Write

lpa     : 0x3
  [1:1] : 0x1   Command Effects Log Page Supported
  [0:0] : 0x1   SMART/Health Log Page per NS Supported

elpe    : 255
npss    : 4
avscc   : 0x1
  [0:0] : 0x1   Admin Vendor Specific Commands uses NVMe Format

apsta   : 0x1
  [0:0] : 0x1   Autonomous Power State Transitions Supported

wctemp  : 354
cctemp  : 355
mtfa    : 50
hmpre   : 0
hmmin   : 0
tnvmcap : 256060514304
unvmcap : 0
rpmbs   : 0
 [31:24]: 0     Access Size
 [23:16]: 0     Total Size
  [5:3] : 0     Authentication Method
  [2:0] : 0     Number of RPMB Units

sqes    : 0x66
  [7:4] : 0x6   Max SQ Entry Size (64)
  [3:0] : 0x6   Min SQ Entry Size (64)

cqes    : 0x44
  [7:4] : 0x4   Max CQ Entry Size (16)
  [3:0] : 0x4   Min CQ Entry Size (16)

nn      : 1
oncs    : 0x1f
  [5:5] : 0     Reservations Not Supported
  [4:4] : 0x1   Save and Select Supported
  [3:3] : 0x1   Write Zeroes Supported
  [2:2] : 0x1   Data Set Management Supported
  [1:1] : 0x1   Write Uncorrectable Supported
  [0:0] : 0x1   Compare Supported

fuses   : 0
  [0:0] : 0     Fused Compare and Write Not Supported

fna     : 0
  [2:2] : 0     Crypto Erase Not Supported as part of Secure Erase
  [1:1] : 0     Crypto Erase Applies to Single Namespace(s)
  [0:0] : 0     Format Applies to Single Namespace(s)

vwc     : 0x1
  [0:0] : 0x1   Volatile Write Cache Present

awun    : 1023
awupf   : 0
nvscc   : 1
  [0:0] : 0x1   NVM Vendor Specific Commands uses NVMe Format

acwu    : 0
sgls    : 0
  [0:0] : 0     Scatter-Gather Lists Not Supported

subnqn  :
ps    0 : mp:7.02W operational enlat:0 exlat:0 rrt:0 rrl:0
          rwt:0 rwl:0 idle_power:- active_power:-
ps    1 : mp:6.30W operational enlat:0 exlat:0 rrt:1 rrl:1
          rwt:1 rwl:1 idle_power:- active_power:-
ps    2 : mp:3.50W operational enlat:0 exlat:0 rrt:2 rrl:2
          rwt:2 rwl:2 idle_power:- active_power:-
ps    3 : mp:0.0760W non-operational enlat:210 exlat:1200 rrt:3 rrl:3
          rwt:3 rwl:3 idle_power:- active_power:-
ps    4 : mp:0.0050W non-operational enlat:2000 exlat:8000 rrt:4 rrl:4
          rwt:4 rwl:4 idle_power:- active_power:-

> nvme id-ctrl /dev/nvme1n1 -H

NVME Identify Controller:
vid     : 0x144d
ssvid   : 0x144d
sn      : S498NA0M403426
mn      : SAMSUNG MZVLB512HAJQ-000H2
fr      : EXA71HAQ
rab     : 2
ieee    : 002538
cmic    : 0
  [2:2] : 0     PCI
  [1:1] : 0     Single Controller
  [0:0] : 0     Single Port

mdts    : 9
cntlid  : 4
ver     : 10200
rtd3r   : 186a0
rtd3e   : 7a1200
oaes    : 0
  [8:8] : 0     Namespace Attribute Changed Event Not Supported

oacs    : 0x17
 [15:4] : 0x1   Reserved
  [3:3] : 0     NS Management and Attachment Not Supported
  [2:2] : 0x1   FW Commit and Download Supported
  [1:1] : 0x1   Format NVM Supported
  [0:0] : 0x1   Sec. Send and Receive Supported

acl     : 7
aerl    : 7
frmw    : 0x16
  [4:4] : 0x1   Firmware Activate Without Reset Supported
  [3:1] : 0x3   Number of Firmware Slots
  [0:0] : 0     Firmware Slot 1 Read/Write

lpa     : 0x3
  [1:1] : 0x1   Command Effects Log Page Supported
  [0:0] : 0x1   SMART/Health Log Page per NS Supported

elpe    : 255
npss    : 4
avscc   : 0x1
  [0:0] : 0x1   Admin Vendor Specific Commands uses NVMe Format

apsta   : 0x1
  [0:0] : 0x1   Autonomous Power State Transitions Supported

wctemp  : 354
cctemp  : 355
mtfa    : 50
hmpre   : 0
hmmin   : 0
tnvmcap : 512110190592
unvmcap : 0
rpmbs   : 0
 [31:24]: 0     Access Size
 [23:16]: 0     Total Size
  [5:3] : 0     Authentication Method
  [2:0] : 0     Number of RPMB Units

sqes    : 0x66
  [7:4] : 0x6   Max SQ Entry Size (64)
  [3:0] : 0x6   Min SQ Entry Size (64)

cqes    : 0x44
  [7:4] : 0x4   Max CQ Entry Size (16)
  [3:0] : 0x4   Min CQ Entry Size (16)

nn      : 1
oncs    : 0x1f
  [5:5] : 0     Reservations Not Supported
  [4:4] : 0x1   Save and Select Supported
  [3:3] : 0x1   Write Zeroes Supported
  [2:2] : 0x1   Data Set Management Supported
  [1:1] : 0x1   Write Uncorrectable Supported
  [0:0] : 0x1   Compare Supported

fuses   : 0
  [0:0] : 0     Fused Compare and Write Not Supported

fna     : 0
  [2:2] : 0     Crypto Erase Not Supported as part of Secure Erase
  [1:1] : 0     Crypto Erase Applies to Single Namespace(s)
  [0:0] : 0     Format Applies to Single Namespace(s)

vwc     : 0x1
  [0:0] : 0x1   Volatile Write Cache Present

awun    : 1023
awupf   : 0
nvscc   : 1
  [0:0] : 0x1   NVM Vendor Specific Commands uses NVMe Format

acwu    : 0
sgls    : 0
  [0:0] : 0     Scatter-Gather Lists Not Supported

subnqn  :
ps    0 : mp:7.02W operational enlat:0 exlat:0 rrt:0 rrl:0
          rwt:0 rwl:0 idle_power:- active_power:-
ps    1 : mp:6.30W operational enlat:0 exlat:0 rrt:1 rrl:1
          rwt:1 rwl:1 idle_power:- active_power:-
ps    2 : mp:3.50W operational enlat:0 exlat:0 rrt:2 rrl:2
          rwt:2 rwl:2 idle_power:- active_power:-
ps    3 : mp:0.0760W non-operational enlat:210 exlat:1200 rrt:3 rrl:3
          rwt:3 rwl:3 idle_power:- active_power:-
ps    4 : mp:0.0050W non-operational enlat:2000 exlat:8000 rrt:4 rrl:4
          rwt:4 rwl:4 idle_power:- active_power:-
                                        1 Reply Last reply Reply Quote 0
                                        • T
                                          tlehrian @george1421
                                          last edited by

                                          @george1421 And from State 2 (reversed):

                                          > nvme list

Node             SN                   Model                                    Namespace Usage                      Format           FW Rev
---------------- -------------------- ---------------------------------------- --------- -------------------------- ---------------- --------
/dev/nvme0n1     S498NA0M403426       SAMSUNG MZVLB512HAJQ-000H2               1         149.49  GB / 512.11  GB    512   B +  0 B   EXA71HAQ
/dev/nvme1n1     S499NX0M113634       SAMSUNG MZVLB256HAHQ-000H2               1           2.95  GB / 256.06  GB    512   B +  0 B   EXD71HAQ

> nvme id-ctrl /dev/nvme0n1 -H

NVME Identify Controller:
vid     : 0x144d
ssvid   : 0x144d
sn      : S498NA0M403426
mn      : SAMSUNG MZVLB512HAJQ-000H2
fr      : EXA71HAQ
rab     : 2
ieee    : 002538
cmic    : 0
  [2:2] : 0     PCI
  [1:1] : 0     Single Controller
  [0:0] : 0     Single Port

mdts    : 9
cntlid  : 4
ver     : 10200
rtd3r   : 186a0
rtd3e   : 7a1200
oaes    : 0
  [8:8] : 0     Namespace Attribute Changed Event Not Supported

oacs    : 0x17
 [15:4] : 0x1   Reserved
  [3:3] : 0     NS Management and Attachment Not Supported
  [2:2] : 0x1   FW Commit and Download Supported
  [1:1] : 0x1   Format NVM Supported
  [0:0] : 0x1   Sec. Send and Receive Supported

acl     : 7
aerl    : 7
frmw    : 0x16
  [4:4] : 0x1   Firmware Activate Without Reset Supported
  [3:1] : 0x3   Number of Firmware Slots
  [0:0] : 0     Firmware Slot 1 Read/Write

lpa     : 0x3
  [1:1] : 0x1   Command Effects Log Page Supported
  [0:0] : 0x1   SMART/Health Log Page per NS Supported

elpe    : 255
npss    : 4
avscc   : 0x1
  [0:0] : 0x1   Admin Vendor Specific Commands uses NVMe Format

apsta   : 0x1
  [0:0] : 0x1   Autonomous Power State Transitions Supported

wctemp  : 354
cctemp  : 355
mtfa    : 50
hmpre   : 0
hmmin   : 0
tnvmcap : 512110190592
unvmcap : 0
rpmbs   : 0
 [31:24]: 0     Access Size
 [23:16]: 0     Total Size
  [5:3] : 0     Authentication Method
  [2:0] : 0     Number of RPMB Units

sqes    : 0x66
  [7:4] : 0x6   Max SQ Entry Size (64)
  [3:0] : 0x6   Min SQ Entry Size (64)

cqes    : 0x44
  [7:4] : 0x4   Max CQ Entry Size (16)
  [3:0] : 0x4   Min CQ Entry Size (16)

nn      : 1
oncs    : 0x1f
  [5:5] : 0     Reservations Not Supported
  [4:4] : 0x1   Save and Select Supported
  [3:3] : 0x1   Write Zeroes Supported
  [2:2] : 0x1   Data Set Management Supported
  [1:1] : 0x1   Write Uncorrectable Supported
  [0:0] : 0x1   Compare Supported

fuses   : 0
  [0:0] : 0     Fused Compare and Write Not Supported

fna     : 0
  [2:2] : 0     Crypto Erase Not Supported as part of Secure Erase
  [1:1] : 0     Crypto Erase Applies to Single Namespace(s)
  [0:0] : 0     Format Applies to Single Namespace(s)

vwc     : 0x1
  [0:0] : 0x1   Volatile Write Cache Present

awun    : 1023
awupf   : 0
nvscc   : 1
  [0:0] : 0x1   NVM Vendor Specific Commands uses NVMe Format

acwu    : 0
sgls    : 0
  [0:0] : 0     Scatter-Gather Lists Not Supported

subnqn  :
ps    0 : mp:7.02W operational enlat:0 exlat:0 rrt:0 rrl:0
          rwt:0 rwl:0 idle_power:- active_power:-
ps    1 : mp:6.30W operational enlat:0 exlat:0 rrt:1 rrl:1
          rwt:1 rwl:1 idle_power:- active_power:-
ps    2 : mp:3.50W operational enlat:0 exlat:0 rrt:2 rrl:2
          rwt:2 rwl:2 idle_power:- active_power:-
ps    3 : mp:0.0760W non-operational enlat:210 exlat:1200 rrt:3 rrl:3
          rwt:3 rwl:3 idle_power:- active_power:-
ps    4 : mp:0.0050W non-operational enlat:2000 exlat:8000 rrt:4 rrl:4
          rwt:4 rwl:4 idle_power:- active_power:-

> nvme id-ctrl /dev/nvme1n1 -H

NVME Identify Controller:
vid     : 0x144d
ssvid   : 0x144d
sn      : S499NX0M113634
mn      : SAMSUNG MZVLB256HAHQ-000H2
fr      : EXD71HAQ
rab     : 2
ieee    : 002538
cmic    : 0
  [2:2] : 0     PCI
  [1:1] : 0     Single Controller
  [0:0] : 0     Single Port

mdts    : 9
cntlid  : 4
ver     : 10200
rtd3r   : 186a0
rtd3e   : 7a1200
oaes    : 0
  [8:8] : 0     Namespace Attribute Changed Event Not Supported

oacs    : 0x17
 [15:4] : 0x1   Reserved
  [3:3] : 0     NS Management and Attachment Not Supported
  [2:2] : 0x1   FW Commit and Download Supported
  [1:1] : 0x1   Format NVM Supported
  [0:0] : 0x1   Sec. Send and Receive Supported

acl     : 7
aerl    : 7
frmw    : 0x16
  [4:4] : 0x1   Firmware Activate Without Reset Supported
  [3:1] : 0x3   Number of Firmware Slots
  [0:0] : 0     Firmware Slot 1 Read/Write

lpa     : 0x3
  [1:1] : 0x1   Command Effects Log Page Supported
  [0:0] : 0x1   SMART/Health Log Page per NS Supported

elpe    : 255
npss    : 4
avscc   : 0x1
  [0:0] : 0x1   Admin Vendor Specific Commands uses NVMe Format

apsta   : 0x1
  [0:0] : 0x1   Autonomous Power State Transitions Supported

wctemp  : 354
cctemp  : 355
mtfa    : 50
hmpre   : 0
hmmin   : 0
tnvmcap : 256060514304
unvmcap : 0
rpmbs   : 0
 [31:24]: 0     Access Size
 [23:16]: 0     Total Size
  [5:3] : 0     Authentication Method
  [2:0] : 0     Number of RPMB Units

sqes    : 0x66
  [7:4] : 0x6   Max SQ Entry Size (64)
  [3:0] : 0x6   Min SQ Entry Size (64)

cqes    : 0x44
  [7:4] : 0x4   Max CQ Entry Size (16)
  [3:0] : 0x4   Min CQ Entry Size (16)

nn      : 1
oncs    : 0x1f
  [5:5] : 0     Reservations Not Supported
  [4:4] : 0x1   Save and Select Supported
  [3:3] : 0x1   Write Zeroes Supported
  [2:2] : 0x1   Data Set Management Supported
  [1:1] : 0x1   Write Uncorrectable Supported
  [0:0] : 0x1   Compare Supported

fuses   : 0
  [0:0] : 0     Fused Compare and Write Not Supported

fna     : 0
  [2:2] : 0     Crypto Erase Not Supported as part of Secure Erase
  [1:1] : 0     Crypto Erase Applies to Single Namespace(s)
  [0:0] : 0     Format Applies to Single Namespace(s)

vwc     : 0x1
  [0:0] : 0x1   Volatile Write Cache Present

awun    : 1023
awupf   : 0
nvscc   : 1
  [0:0] : 0x1   NVM Vendor Specific Commands uses NVMe Format

acwu    : 0
sgls    : 0
  [0:0] : 0     Scatter-Gather Lists Not Supported

subnqn  :
ps    0 : mp:7.02W operational enlat:0 exlat:0 rrt:0 rrl:0
          rwt:0 rwl:0 idle_power:- active_power:-
ps    1 : mp:6.30W operational enlat:0 exlat:0 rrt:1 rrl:1
          rwt:1 rwl:1 idle_power:- active_power:-
ps    2 : mp:3.50W operational enlat:0 exlat:0 rrt:2 rrl:2
          rwt:2 rwl:2 idle_power:- active_power:-
ps    3 : mp:0.0760W non-operational enlat:210 exlat:1200 rrt:3 rrl:3
          rwt:3 rwl:3 idle_power:- active_power:-
ps    4 : mp:0.0050W non-operational enlat:2000 exlat:8000 rrt:4 rrl:4
          rwt:4 rwl:4 idle_power:- active_power:-
                                          george1421G 1 Reply Last reply Reply Quote 0
                                          • george1421G
                                            george1421 Moderator @tlehrian
                                            last edited by

                                            @tlehrian Excellent you have been able to prove the case. Now we just need to paw through the data and see if we can find a unique key to identify the drives. We are done with the testing for now. We may need you to check a few more commands later if these two don’t give us a workable solution, but for now this is great!!.

                                            Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG!

                                            T 1 Reply Last reply Reply Quote 0
                                            • 1
                                            • 2
                                            • 3
                                            • 1 / 3
                                            • First post
                                              Last post

                                            167

                                            Online

                                            11.6k

                                            Users

                                            17.1k

                                            Topics

                                            154.6k

                                            Posts
                                            Copyright © 2012-2024 FOG Project