Adding needed repository....................................Failed!

[mig39]

Hi guys,

Installing a brand new FOG server on a Ubuntu 18.04 server, from scratch.

I have nothing on the server other than Ubuntu, open-vm-tools, and git.

I downloaded the Fog installer with git, and went through the installation process. I get this result:

 * Here are the settings FOG will use:
 * Base Linux: Debian
 * Detected Linux Distribution: Ubuntu
 * Server IP Address: 192.168.7.21
 * Server Subnet Mask: 255.255.255.0
 * Interface: ens160
 * Installation Type: Normal Server
 * Internationalization: 0
 * Image Storage Location: /images
 * Using FOG DHCP: No
 * DHCP will NOT be setup but you must setup your
 | current DHCP server to use FOG for PXE services.

 * On a Linux DHCP server you must set: next-server and filename

 * On a Windows DHCP server you must set options 066 and 067

 * Option 066/next-server is the IP of the FOG Server: (e.g. 192.168.7.21)
 * Option 067/filename is the bootfile: (e.g. undionly.kpxe)


 * Are you sure you wish to continue (Y/N) y

 * Installation Started

 * Installing required packages, if this fails
 | make sure you have an active internet connection.

 * Adding needed repository....................................Failed!

Can anyone point me in the right direction to figure out what is causing this?

Thanks in advance.

[mig39]

Replying to myself in case anyone else has the same issue.

error log has this:

../lib/common/functions.sh: line 535: ntpdate: command not found
Generating locales (this might take a while)...
  en_US.UTF-8... done
Generation complete.
../lib/common/functions.sh: line 539: add-apt-repository: command not found

On a bare, minimal install Ubuntu 18.04 server, you need to install software-properties-common and ntpdate.

So…

apt install -y software-properties-common ntpdate

seems to fix those errors.

[Sebastian Roth]

@mig39 I am wondering which version of FOG are you trying to install? I remember we had this issue long time ago and the current installer should install those packages for you - see here!

The line numbers we see in the error messages above don’t match those in the current scripts. So I am fairly sure you are not using the latest FOG version 1.5.5!?