Windows 7 Deployment FOG- SAD2 Driver tool

jasonaedwards · Jan 8, 2013, 8:50 AM

This is perhaps a dumb question… I want to follow your tutorial step by step, but I have not yet downloaded FOG. Should I install it has a virtual machine? Or do I just install it on a standalone server on our network?

Thanks

Jason

andyroo54 · Jan 8, 2013, 10:48 PM

[quote=“jasonaedwards, post: 10076, member: 3147”]This is perhaps a dumb question… I want to follow your tutorial step by step, but I have not yet downloaded FOG. Should I install it has a virtual machine? Or do I just install it on a standalone server on our network?

Thanks

Jason[/quote]

Hi, you can follow the guide without having fog, you can still create your image etc, and get it all ready, just make sure to use lots of snapshots along the way.

But to fully test the deployment you will need FOG.

You could run the sysprep and turn the machine off, then ghost the hard drive to test it in another machine. But I would just get fog working anyway.

nikonaum · Jan 13, 2013, 9:20 PM

I love this tutorial. Everything works perfect. I made myself a Universal Windows 7 x86 image out of a VirtualBox (ver. 4.2.6) virtual guest in my ArchLinux. I deployed it on some “metal” it takes about 30 minutes – 10 min. for image deploy (12GB) and 20 minutes unattended install and SAD2 drivers installation. One issue with the Video Card driver in the real hardware – “Device manager” says driver error: “Not enough resources”… or something similar, maybe because my video uses just 8MB of RAM (shared memory) and there is no option to increase it in BIOS even with the latest bios flashed. Though Microsoft site says that this error is related to Interrupts been occupied by other device. NOTE: There is a scenario which is very important for me: I want to deploy this image to previously installed and used PCs (some kind of reinstall) and just deploy it on the first partition e.g. drive and leave drive intact, because there are some user’s saved files, mainly office documents, pictures etc. but I don’t know how to do it, the only suggestion that I found was that I had to create multipartition image (single disk) and basically delete from /images/image-name/ directory the not needed partition of the drive. Because my Golden Image is one partition only (and one 100MB for special win7 needs) so it wipes all my D drive of the computer on which the image is deployed. Any suggestions? How can I save the data of my precious drive?

andyroo54 · Jan 13, 2013, 9:26 PM

[quote=“nikonaum, post: 10129, member: 2897”]I love this tutorial. Everything works perfect. I made myself a Universal Windows 7 x86 image out of a VirtualBox (ver. 4.2.6) virtual guest in my ArchLinux. I deployed it on some “metal” it takes about 30 minutes – 10 min. for image deploy (12GB) and 20 minutes unattended install and SAD2 drivers installation. One issue with the Video Card driver in the real hardware – “Device manager” says driver error: “Not enough resources”… or something similar, maybe because my video uses just 8MB of RAM (shared memory) and there is no option to increase it in BIOS even with the latest bios flashed. Though Microsoft site says that this error is related to Interrupts been occupied by other device. NOTE: There is a scenario which is very important for me: I want to deploy this image to previously installed and used PCs (some kind of reinstall) and just deploy it on the first partition e.g. drive and leave drive intact, because there are some user’s saved files, mainly office documents, pictures etc. but I don’t know how to do it, the only suggestion that I found was that I had to create multipartition image (single disk) and basically delete from /images/image-name/ directory the not needed partition of the drive. Because my Golden Image is one partition only (and one 100MB for special win7 needs) so it wipes all my D drive of the computer on which the image is deployed. Any suggestions? How can I save the data of my precious drive?[/quote]

Hi,

I’m glad you find it useful. As to the D:\ user drives, I’m not sure of any easy way to preserve that data. You might want to post it in the help section to get a response.

I personally would write a logon script to copy the users data to a file share. Once they are all copied as they logon (robocopy?) then you can image them, and copy the data back.

dahhunter · Jan 25, 2013, 9:35 PM

I followed all the steps very carefully… and at the “Set up is Checking video Performance”

I get a Install Windows Error
read error in the C:\Windows\pather\unattend.xml

Hmm. a bit confused cause

Here is the Screen shot:
[IMG]http://i658.photobucket.com/albums/uu305/dahhunter/sysprep_zps5c58b713.jpg[/IMG]

andyroo54 · Jan 31, 2013, 9:23 PM

[quote=“dahhunter, post: 10291, member: 3244”]I followed all the steps very carefully… and at the “Set up is Checking video Performance”

I get a Install Windows Error
read error in the C:\Windows\pather\unattend.xml

Hmm. a bit confused cause

Here is the Screen shot:
[IMG]http://i658.photobucket.com/albums/uu305/dahhunter/sysprep_zps5c58b713.jpg[/IMG][/quote]
Sorry I thought I replied to this.

The problem appears to be with your unattend file. In particular something you have specified possibly in shell setup module. If you could upload the file we can have a look, you may need to zip the file first.

wizard210 · Feb 14, 2013, 3:11 PM

I’m getting an error that windows cannot open dpinst.7z. Any help would be appreciated.

andyroo54 · Feb 17, 2013, 11:08 PM

[quote=“wizard210, post: 10657, member: 894”]I’m getting an error that windows cannot open dpinst.7z. Any help would be appreciated.[/quote]

Are you using the version I specified in the original post? Or a newer version? I use version SAD2-111118 of the SAD2 tool.

Bjarke · Feb 22, 2013, 6:56 AM

Hi all

First off thanks for a greate guide
I just wantede to let you know that this guide works without issues on latest version of SAD2 (v120520)

wizard210 it sounds like you have been messing around with eighter the bin folder inside drivers or you made changes to the script so it is now unable to find the bin folder.

Regards
Bjarke

YuYo · Feb 27, 2013, 3:48 PM

Can anybody re-post the SAD tool? It has been removed from the original site and I could not download it.

andyroo54 · Feb 28, 2013, 2:19 AM

[quote=“YuYo, post: 10903, member: 3300”]Can anybody re-post the SAD tool? It has been removed from the original site and I could not download it.[/quote]
It is still on the website:

[url]http://forum.driverpacks.net/viewtopic.php?id=5336[/url]

YuYo · Feb 28, 2013, 9:37 AM

[quote=“andyroo54, post: 10920, member: 267”]It is still on the website:

[url]http://forum.driverpacks.net/viewtopic.php?id=5336[/url][/quote]

The links are broken and take you to a Mediafire error page.

andyroo54 · Mar 1, 2013, 12:59 AM

[quote=“YuYo, post: 10923, member: 3300”]The links are broken and take you to a Mediafire error page. :([/quote]
So they are… looks like some one has already reported this in the thread, but here is the only version I have which is 111118, the CMD script is slightly modified by me.

[url]http://dropcanvas.com/k9iq0[/url]

YuYo · Mar 12, 2013, 3:37 PM

Got it, thanks

Random Hero · Mar 13, 2013, 2:41 PM

I am having some issues with SAD working. I downloaded the OP’s DP_Install_Tool.txt and pasted all of that into the file on the C drive, and I get the issues in the photos I’ve attached.

I hit OK to the prompt in the 1st photo, and it proceeds to extract the files as shown in the 2nd photo, but after it extracts them all, it gives me the error you see in the 3rd photo. I’ve also attached a .txt file that contains the DP_Install_Tool that I am using.

Any help would be greatly appreciated! Thanks!

[url=“/_imported_xf_attachments/0/265_image.jpeg?:”]image.jpeg[/url][url=“/_imported_xf_attachments/0/266_image-1.jpeg?:”]image-1.jpeg[/url][url=“/_imported_xf_attachments/0/267_image-2.jpeg?:”]image-2.jpeg[/url][url=“/_imported_xf_attachments/0/268_DP_Install_Tool.txt?:”]DP_Install_Tool.txt[/url]

Bjarke · Mar 13, 2013, 3:29 PM

If you downloaded a new version of the SAD2 tool, you really should use the version included there, the modifications neede to make it fit this project is minimal, and there are a lot of other changes in the script now. If you want to use the DP_Install_Tool.txt included in this guide, then make sure your also using the same SAD2 version else you will get errors.

Random Hero · Mar 13, 2013, 3:51 PM

v111118 brings me to mediafire and says “Invalid or deleted file”. Is it available anywhere else, of can somebody upload it?

It seems as though only the most current version is available. I tried everything between 111118 and the latest, and only the latest works.

EDIT: Nevermind, I see up a couple posts somebody uploaded it. I tried it and it works perfect! Thanks so much!

mllinang · Mar 15, 2013, 12:51 PM

Hi Andyroo54 ,

Did u manage to upload the new pdf tutorial with the added/updated instructions/informations based from the comments and suggestions?

Thanks a lot.

Lon

andyroo54 · Mar 16, 2013, 7:46 AM

[quote=“mllinang, post: 11174, member: 3541”]Hi Andyroo54 ,

Did u manage to upload the new pdf tutorial with the added/updated instructions/informations based from the comments and suggestions?

Thanks a lot.

Lon[/quote]
Negative, but the original thread posts have been updated.

I suggest reading the whole thread first though. But the instructions are still good.

David Mack · Mar 19, 2013, 10:56 PM

[quote=“Bjarke, post: 10818, member: 3320”]Hi all

First off thanks for a greate guide
I just wantede to let you know that this guide works without issues on latest version of SAD2 (v120520)

wizard210 it sounds like you have been messing around with eighter the bin folder inside drivers or you made changes to the script so it is now unable to find the bin folder.

Regards
Bjarke[/quote]
I want to use the newest script too, which is in my case 121126, but it is “completely” rewritten.

Does somebody still have version 120520 (because it is down)?
Or has somebody an idea where to insert the code in 121126?

If this could be solved, others would be helped who whant to use an updatet version.

For now i use the original version, which can still be downloaded here: [url]http://dropcanvas.com/k9iq0[/url]

Nice work. Thanks.

Windows 7 Deployment FOG- SAD2 Driver tool

145

12.0k

17.3k

155.2k