API

theWizard

curl -H ‘fog-api-token: abcde’ -H ‘fog-user-token: fghij’ -X GET http://fogserver/fog/task/current

Thankyou perhaps i will have to wait as anything i try results in
The requested URL /fog/task/current was not found on this server.

Tom Elliott

@theWizard I don’t follow.

What are you using as a test, exactly?

theWizard

@Tom-Elliott
I’m using powershell with Invoke-WebRequest which is alias for curl

UWPVIOLATOR

@theWizard

What did your Powershell command look like? I would like to see that example. I am most familiar with it and the one main thing I need to work on is a for each from a csv file with all of our old junked computers and laptops returned from lease. We no longer need them in fog.

george1421

@UWPVIOLATOR Not the answer you are looking for, but a bit more details that Wayne uses for FOG scripting. https://forums.fogproject.org/topic/9779/can-i-use-some-kind-of-script-to-create-image-and-ghost-my-lab-machines/15

george1421

@UWPVIOLATOR Warning: I’m not a programmer (or even know how to program in PS) and sometimes I even question if I know what I doing here…

But I think I was able to translate one of Wayne’s posts with a curl call into powershell.

curl --silent -k -H 'Content-Type: application/json' -H 'fog-user-token: ZjBkMmE3YmI5NmUzZDcxYTliYzNkZTc4MmJhNTFiYTQ3Mzc2MTg5MzYxMThmNjA5NDYyMjllMTA5YzE0NWUxMjFiNzkyMTc5OTMwZjFhZGM5NWIxMTc3YWZmNTU2MmMwYjFhNjg0NjVmMTkyMGZkNDQxYmY0MzI1NWNkMzQyM2M=' -H 'fog-api-token: MzI2NDY1NjY2NjM0MzUzMDMzMzA2MzM1MzEzNzYyMzg2NTYyNjQ2MjMxMzczMTM0NjY2NDM0NjUzOTM2NjIzNDM4MzQ2NDM3MzY2MzM2MzMzNjYyMzUzODY0MzUzNDYyMzgzMDY2NjQzNTMxMzI2MzM5NjYzNjYzMzMzMzM0MzA=' http://10.0.0.28/fog/host/testhost1/task -d '{"taskTypeID":1,"shutdown": true}'

would translate into something like this:

$headers = @{}
$headers.Add("fog-user-token", "ZjBkMmE3YmI5NmUzZDcxYTliYzNkZTc4MmJhNTFiYTQ3Mzc2MTg5MzYxMThmNjA5NDYyMjllMTA5YzE0NWUxMjFiNzkyMTc5OTMwZjFhZGM5NWIxMTc3YWZmNTU2MmMwYjFhNjg0NjVmMTkyMGZkNDQxYmY0MzI1NWNkMzQyM2M=")
$headers.Add("fog-api-token", "MzI2NDY1NjY2NjM0MzUzMDMzMzA2MzM1MzEzNzYyMzg2NTYyNjQ2MjMxMzczMTM0NjY2NDM0NjUzOTM2NjIzNDM4MzQ2NDM3MzY2MzM2MzMzNjYyMzUzODY0MzUzNDYyMzgzMDY2NjQzNTMxMzI2MzM5NjYzNjYzMzMzMzM0MzA=")

$mydata = @{}
$mydata.Add("taskTypeID", "1")
$mydata.Add("shutdown", "true")

$json = $mydata | ConvertTo-Json
$Uri = 'http://10.0.0.28/fog/host/testhost1/task'

Invoke-WebRequest -Method Post -Uri $Uri -Header $header -Body $json -ContentType 'application/json'

Tom Elliott

@george1421 There’ s a simpler method

Here’s some scripts that I run.

This is specific to my needs on a different project, but could be converted as needed.

buildheaders.ps1

<# Build headers script help
    .SYNOPSIS
        This powershell script just creates a single point for building headers
        rather than constantly rewriting the same script over and over.
    .USAGE
        This just sources the function so there is no real usage here.
#>
function Build-Headers {
    Param(
        [string]$authorizationString,
        [string]$tenantCode,
        [string]$acceptType,
        [string]$contentType
    )
    
    $header = @{
        "fog-api-token" = $fogApiToken;
        "fog-user-token" = $fogUserToken;
        #"Accept" = $accept;
        "Content-Type" = $contentType
    }

    Write-Verbose("");
    Write-Verbose("---------- Headers ----------");
    Write-Verbose("Authorization: " + $authorizationString);
    Write-Verbose("fog-api-token: " + $fogApiToken);
    Write-Verbose("fog-user-token: " + $fogUserToken);
    Write-Verbose("Accept: " + $acceptType);
    Write-Verbose("Content-Type: " + $contentType);
    Write-Verbose("-----------------------------");
    Write-Verbose("");

    Return $header
}

Use case script – To create a task for a host with say ID # 10.

taskhost.ps1

<# Creates Task for id passed in to script.
    .SYNOPSIS
        Helps create task from command line.
    .PARAMETER id (required)
        This is the ID Of the Host to task.
    .PARAMETER configFile (optional)
        This is not a required file, this allows you to use a different
        basicconfig.ps1 file if need be.
#>
[CmdletBinding()]
    Param(
        [Parameter(Mandatory=$True)]
        [string]$id,

        [Parameter()]
        [string]$configFile
    )

# Set errors to silent if we are not in verbose mode.
If (!$PSCmdlet.Myinvocation.BoundParameters["Verbose"].IsPresent) {
    $ErrorActionPreference = "SilentlyContinue"
}

# Setup up defailt if configFile is not already set.
If (!$configFile) {
    $configFile = '.\basicconfig.ps1'
}

# Load our config file.
. $configFile

# Set our base call (item) for the api.
$baseURL = $endpointURL + "/host/" + $id + "/task"

# Source build headers function.
. ".\buildheaders.ps1"

# We know we're using json so set accept/content type as such.
$contentType = "application/json"

# Get our headers Building off the config file information.
$headers = Build-Headers $fogApiToken $fogUserToken $contentType $contentType

# Display what url we are calling so somebody could use it later if in verbose.
Write-Verbose ""
Write-Verbose "---------- Caller URL ----------"
Write-Verbose ("URL: " + $baseURL)
Write-Verbose "--------------------------------"
Write-Verbose ""

$dataSet = @{
    "taskTypeID" = 1
    "shutdown" = true
}

$dataToSend = ($dataSet | ConvertTo-JSON)

# Display the data we're sending
Write-Verbose ""
Write-Verbose "---------- Sending Body ----------"
Write-Verbose $dataToSend
Write-Verbose "----------------------------------"
Write-Verbose ""

# Perform the request
$ret = Invoke-RestMethod -Method Post -Uri $baseURL -Headers $headers -ContentType $contentType -Body $dataToSend

# Write our return information if there is anything to see.
Write-Verbose ""
Write-Verbose "---------- Returned Data ----------"
Write-Verbose $ret
Write-Verbose "-----------------------------------"
Write-Verbose ""

# All Done

You would have all three files in the same place and call from powershell:
.\taskhost.ps1 -id 10

Hopefully this helps. Of course it could be more generalized, but I’m just giving a basic overview.

Tom Elliott

basicconfig.ps1

<# Config for our scripts.
    .SYNOPSIS
        Just used to store our common variables that we don't want to
        recode for every script.
    .USAGE
        No related usage, just sets variables.
#>
$fogApiToken = "TokenFromGUIForAPIAccess";
$fogUserToken = "TokenFromGUIForUserToken";
$endpointURL = "http://fogserver/fog/";

Wayne Workman

@theWizard I’ve listed the examples I have here: https://forums.fogproject.org/topic/9779/can-i-use-some-kind-of-script-to-create-image-and-ghost-my-lab-machines

AndrewG78

Hi, Could you please share an example of query to obtain list of active tasks per given GROUP ID?
I just want to check if all multicast jobs are done in a specific group.
Thx.

Wayne Workman

@andrewg78 Probably, I’ll have to look into it. Multicast tasks are handled differently than unicast tasks - they are treated as an individual job. If you wanted to get the status of the entire job, you could probably just follow along with the examples in this link: https://forums.fogproject.org/topic/9779/can-i-use-some-kind-of-script-to-create-image-and-ghost-my-lab-machines Though you would need to use the multicast task type, or know the task ID already.

AndrewG78

@wayne-workman
Thx. I figured out where was the issue. Maybe this info will help somebody.
I use curl under Windows, but command line doesn’t support single quotes '.
I used " and had to escape inner ones
–data “{\“hostID\”:13}”

API

buildheaders.ps1

taskhost.ps1

basicconfig.ps1

158

12.0k

17.3k

155.2k