Hi @george1421 I have the reference image now.
Can you help me to create this entry in the FOS system so I can push the image directly from there (without going into FOG I believe), and also, I should have 3 different images to deploy. How can I create another menu entry in FOS?
Thank you for your help.
Regards.
L.

Hi @george1421,
it looks like FOG has issues with the ‘Microsoft Reserved’ windows partition.
I can image the EFI partition, I am trying now to capture just the main one, but it is very slow apparently 1h 20m left (12GB - 115MB/min) using partimage instead of partclone (I have selected it in the image configuration, but the tool actually is partclone).

If this duration is due to the wifi transfer/speed, I will go back to the wired scenario.
[wired] In order to capture one and massively deploy to multiple devices (without managing the devices in FOG), what’s the best workflow in your opinion?

I’ll keep you posted.
Lucio

@george1421 Hi guys,
I cannot test the wired using the 192.168.x.x because it is controlled by the IT department and the DHCP and DNS is working under another subnet.
I have to configure FOG as the DHCP server and so start again from scratch.

@george1421
Yes, 192.x.x.x is expected. I have reinstalled FOG from scratch too.
Ping is working and the command returned the following:

Regards.
L.

@george1421

So guys, I did have network issues.
I have now fixed them all and it looks like it’s working from a ping and broadcasting dhcp side.
Still I have the same issue.
I don’t know if it’s something related to my partition/disk choice in FOG or there is something else broken.

Thank you for your help.
Lucio

@george1421 said in Suggestion please:

isdebug=yes

Failed or unable to access 10.10.10.1/fog//index.php for connection testing.
The tablet took the 10.10.10.4 so the dhcp is working fine.
Where can I check the FOG server IP address file configuration?
I am browsing the FOG server UI using the 10.10.10.1 (and the host was registered fine as well)…weird.

@george1421

@george1421 From the master branch v1.5.7 I believe.

@george1421

But let me check the patclone option, probably I have made a mistake. I have selected to not use compression.

Rgards.
L.

@george1421
Hi, I have reconfigured the FOG server to use wifi.

How can I register the MAC address manually?
Option 2 in the FOS menu list?

Thanks.
L.

@george1421 from the wifi network I cannot reach the wired one. So, because FOG server is on the wired one, I have to revert back the FOG server to use the wifi. They are on 2 different subnets with no network rules between them.

@george1421 Alright, I have to change the FOG configuration to use the wifi instead of ethernet. I’ll keep you posted.

Thanks indeed
Much appreciated.

L.

@george1421 Thanks, I have the wireless adapter wlp1s0 (and I believe I have also an IP address now)

@george1421

@Sebastian-Roth

guys sorry for the quality

@george1421 Hi, I was looking into it.

image url)

Thanks guys.
L.

@george1421 Hi guys,
I have tried this new image and I have no more errors, I have reached the CLI, but no network device is found.

Regards.
L.

@Sebastian-Roth Hi Sebastian,
I have pulled the master branch from Git.

Thank you @george1421

Thanks guys.
Lucio

@george1421 Hi, tried option 6 and I have gotUnable to mount root fs on unknow block
Kernel offset: disabled
Not syncing: VFS: unable to mount root fs on unknow block.

No CLI after this, it’s just frozen at this point.
Any thoughts?

Regards.
L.

@Quazz Hi Quazz,
where is this FOG menu entry in the FOS USB linux sub-system?
If I select the first option it is going to capture or deploy, depending on what I have selected form the FOG server UI on that terminal (registered).

There is no item listed where I can select the image ID.

Thank you.
L.