Amazing!!
I have tried to do something similar in my FOG server and works fine!
FOG server: 1.2.0 latest SVN installed
Operating System: Ubuntu 13.10 latest updates installed
Thank you!
Sorry, with latest SVN installed is not working, too.
[CODE]Ubuntu
..#######:. ..,#,.. .::##::.
.:###### .:;####:…;#;…
…##… …##;,;##::::.##…
,# …##…##:::## …::
## .::###,##. . ##.::#.:######::.
…##:::###::…#. … .#…#. #…#:::.
…:####:… …##…##::## … #
# . …##:,;##;:::#: … ##…
.# . .:;####;::::.##:::;#:…
# …:;###…
###########################################
###########################################
Version: 1.3.0 Installer/Updater
Starting Debian / Ubuntu / Kubuntu / Edubuntu Installtion.
#####################################################################
FOG now has everything it needs to setup your server, but please
understand that this script will overwrite any setting you may
have setup for services like DHCP, apache, pxe, tftp, and NFS.
It is not recommended that you install this on a production system
as this script modifies many of your system settings.
This script should be run by the root user on Redhat or with sudo on Ubuntu.
** Notice ** Redhat users will need to disable SELinux and iptables in
order to use FOG
Please see our wiki for more information at http://www.fogproject.org/wiki
Here are the settings FOG will use:
Base Linux: Debian
Detected Linux Distribution: Ubuntu
Installation Type: Normal Server
Server IP Address: 172.16.0.11
DHCP router Address: 172.16.0.11
DHCP DNS Address: 8.8.8.8
Interface: eth1
Using FOG DHCP: 1
Internationalization: 0
Image Storage Location: /images
MySQL Connection Type: MYSQLI_ASYNC
Donate: 0
Are you sure you wish to continue (Y/N)
Installation Started…
Installing required packages, if this fails
make sure you have an active internet connection.
Preparing apt-get
Packages to be installed: apache2 php5 php5-json php5-gd php5-cli php5-curl mysql-server mysql-client isc-dhcp-server tftpd-hpa tftp-hpa nfs-kernel-server vsftpd net-tools wget xinetd sysv-rc-conf tar gzip build-essential cpp gcc g++ m4 htmldoc lftp openssh-server php-gettext php5-mcrypt php5-mysqlnd curl libc6 libcurl3 zlib1g
Skipping package: apache2 (Already installed)
Skipping package: php5 (Already installed)
Skipping package: php5-json (Already installed)
Skipping package: php5-gd (Already installed)
Skipping package: php5-cli (Already installed)
Skipping package: php5-curl (Already installed)
Skipping package: mysql-server (Already installed)
Skipping package: mysql-client (Already installed)
Skipping package: isc-dhcp-server (Already installed)
Skipping package: tftpd-hpa (Already installed)
Skipping package: tftp-hpa (Already installed)
Skipping package: nfs-kernel-server (Already installed)
Skipping package: vsftpd (Already installed)
Skipping package: net-tools (Already installed)
Skipping package: wget (Already installed)
Skipping package: xinetd (Already installed)
Skipping package: sysv-rc-conf (Already installed)
Skipping package: tar (Already installed)
Skipping package: gzip (Already installed)
Skipping package: build-essential (Already installed)
Skipping package: cpp (Already installed)
Skipping package: gcc (Already installed)
Skipping package: g++ (Already installed)
Skipping package: m4 (Already installed)
Skipping package: htmldoc (Already installed)
Skipping package: lftp (Already installed)
Skipping package: openssh-server (Already installed)
Skipping package: php-gettext (Already installed)
Skipping package: php5-mcrypt (Already installed)
Skipping package: php5-mysqlnd (Already installed)
Skipping package: curl (Already installed)
Skipping package: libc6 (Already installed)
Skipping package: libcurl3 (Already installed)
Skipping package: zlib1g (Already installed)
Confirming package installation.
Configuring services.
Setting up and starting MySql…OK
Backing up user reports…OK
Setting up and starting Apache Web Server…OK
Changing permissions on apache log files…OK
Downloading kernels and inits…OK
Downloading New FOG Client file…OK
Copying back any custom hook files…OK
Copying back any custom report files…OK
You still need to install/update your database schema.
This can be done by opening a web browser and going to:
Press [Enter] key when database is updated/installed.
Setup complete!
You can now login to the FOG Management Portal using
the information listed below. The login information
is only if this is the first install.
This can be done by opening a web browser and going to:
http://172.16.0.11/fog/management
Default User:
Username: fog
Password: password
[/CODE]
I attach two screenshots ([URL=‘http://fog.tonicapablo.es/imagenes/Screenshot1.jpg’]1[/URL] and [URL=‘http://fog.tonicapablo.es/imagenes/Screenshot2.jpg’]2[/URL]), showing the problem. I think that the issue is when shows “Illegal Instruction” and then tries to image.
Sorry, with the latest update of SVN 3316 it works.
Thank you!
Operating system: Ubuntu Desktop 13.10 i386 32 bits
FOG Server: 1.2.0
SVN: 3306
Since I updated this weekend to this SVN there is no posibility to see the kernel list (Published and Old Published). I can see the Unofficial kernels.
Any help will be very useful. Meanwhile, I will update to the latest SVN.
Thank you!
FOG server version 1.2.0 with SVN: 3306, kernel 1.18.4 x86 on Ubuntu Desktop 13.10 i386 32 bits with latest updates.
I am trying to image a Windows XP Professional SP3 32 bits on DELL D-505 but when PXE boot begins, appear someting similar like “Illegal Instruction” (before starting imaging) and then enters into a loop and not works.
Any help will be very useful. Thanks!
[quote=“Wolfbane8653, post: 46255, member: 3362”]ToniCapablo,
Thank you for using our product but you have posted in a thread that lists machines that work with FOG. Please remove your post and place it under the Troubleshooting Section.[/quote]
OK, I am on it. Sorry and thank you!
[quote=“Tom Elliott, post: 45730, member: 7271”]Do you know what kernel/init are loading? My guess is it’s loading a 32 bit setup. Can you try an hour earlier kernel such as 3.18.0x86?[/quote]
Hi Tom & All People!
I have updated my FOG server to this kernel (Unofficial Kernel):
Unofficial Published Kernels
Kernel - 3.18.4 TomElliott
Date : January 30, 2015
Version: 3.18.4
FOG Type: TomElliott
Arch Type: (x86)
And does not work, too. Today I have updated to the latest SVN update (3306) and I have found this when I see the kernels available, too:
[IMG]http://fog.tonicapablo.es/imagenes/Screenshot.png[/IMG]
Thank you for your replies!
I have installed the latest: 3264 (I usually update).
Thanks!
Hello!
I have a FOG server 1.2.0 latest SVN and kernel update of Linux image with Ubuntu 13.10. I have no way to create an image of a laptop Latitude D505 with XP installed.
When it runs the upload task, appears something similar like this:
[INDENT=1]“Fail in Line 17” at “…fog/scripts/bin/fog.statusreporter”[/INDENT]
When the Linux image tries to boot and I see the differents commands running appears a line with “Illegal instruction”.
But I do not understand. You say that a D505 with 1.2.0 it works (so with 1.2.0 with latest SVN would work, right?).
I will wait for answers, if posible. Thank you very much!
Hello people!
Recently I had a similar problem. My FOG solution is:
Working with Hosts Management section, creating a host, erasing this host and again creating the host with same MAC I had the trouble that FOG said me that this hostname already exists. In the Host Management section did not appear the host.
The solution is like Tom says. Thank you Tom!!
For me, deleting the registers in fog database with the [I]wrong[/I] host ([I]wrong[/I] means the created, then deleted and then tried to create) in [I]host[/I] and [I]hostMAC[/I] table was the solution.
I hope it helps. See you,
T. Capablo.
Oh!
I have recently installed a FOG server 1.2.0 with Ubuntu 13.10 and seems too low, in order to download or upload images (in a simple LAN connecting server and client with a switch 10/100 MBps). I will try to modify this value of “FOG_PIGZ_COMP”.
Thanks!
Thank you very much Jaymes.
Finally, I deciced to install FOG as DHCP server, modifying the Ubuntu server for routing interfaces and now I think it is working well.
Hi all!! 
I hope you are very well, devoloping, testing, working with the FOG solution 
And getting crazy, too 
For me, I am using this software for my final project of Computer Science Career (my job consists that I must able to get a FOG solution installed and working in my network). For now, I have only a simply question. The related data are below these lines. Then, I will make the question.
[INDENT=1][I]FOG Server: Ubuntu 13.10 with FOG 1.2.0[/I][/INDENT]
[INDENT=1][I]Network: [/I][/INDENT]
[INDENT=1][I]- Router/modem/gateway with DHCP server ON (unmodifiable)[/I][/INDENT]
[INDENT=1][I]- Switch to interconnect router, fog server and testing PCs[/I][/INDENT]
[INDENT=1][I]Testing PCs: Windows 7 / Linux [/I][/INDENT]
[INDENT=1][I]- This PCs would boot in order to get the PXE menu or boot locally from hard disk[/I][/INDENT]
With the help of this [B]forum[/B] and the [B]FOGProject Wiki[/B], I have finally installed and working FOG.
But for now, when I have installed [B]DNSMASQ[/B], first of all, it has disabled the correct configuration for DNS servers (besides getting the correct[I] ltsp.conf[/I] file like says the [URL=‘http://fogproject.org/wiki/index.php/Using_FOG_with_an_unmodifiable_DHCP_server/_Using_FOG_with_no_DHCP_server’]Wiki[/URL].
When I shutdown the server and start again, no DNS servers are configured (besides the configuration of Network Manager in Ubuntu). If I modify the[I] /etc/resolv.conf[/I] with my DNS servers, then I have DNS servers configured and have navigation properly.
Is there a way to overwrite the DNS configuration, without modify DNSMASQ configuration?
It seems that is a problem not solved yet, I searched related posts like this [URL=‘http://www.fogproject.org/forum/threads/dnsmasq.12088/#post-39654’]one[/URL], and no solution for the moment.
Also, I have tried many solutions on the web like [URL=‘http://askubuntu.com/questions/157154/how-do-i-include-lines-in-resolv-conf-that-wont-get-lost-on-reboot’]this[/URL] or[URL=‘http://itsfoss.com/resolvconf-permanent-ubuntu/’] this [/URL]and does not work, too.
Any kind of help will be very useful. Thanks in advance,
Toni Capablo.
Thank you very much for your job, Liam!
Now I am working in my Final Project of Technical Computer Science Career.
This document will help me much more reading a lot of documents
If I have any questions, can I use this same thread to ask? Thanks in advance,
T. Capablo.