Hello All,
When using the usertracker occasionally it will not write any data to the db, fog log shows (on unit / service start-up)
01/10/2014 06:31 FOG::UserTracker Unknown error, module will exit.
however the next day it may be fine and capture the data
has anyone else seen this or has a suggested workaround?
FOG 1.1.2
Ben ensure your php.ini file has your timezone defined, ubuntu location is "/etc/php5/apache2/php.ini
date.timezone = “Europe/London”
Timezone list can be found [url]http://php.net/manual/en/timezones.php[/url]
also ensure you have a daily cron for an ntp update
[FONT=Helvetica Neue][COLOR=#000000][SIZE=14px]create a file/etc/cron.daily/ntpdate containing:[/SIZE][/COLOR][/FONT]
[FONT=Helvetica Neue][COLOR=#000000][SIZE=14px][/SIZE][/COLOR][/FONT]
[COLOR=#000000]ntpdate ntp.ubuntu.com[/COLOR]
[COLOR=#000000]sudo chmod 755 /etc/cron.daily/ntpdate[/COLOR]
Hello All,
We are using Fog to track user log on / off times to the workstations, the time on the server and end points are correct however when using the Report Management the time stamp is incorrect
any thoughts?
Thanks
Mike
I would like to automate the user log in history
looking at the url when manually viewing a user
HOSTID = 0 i assume this means all hosts the user has logged into?
USERID is the user i am review
= must be the date range but i am not sure how to set it to all dates ?
IP ADDRESS /fog/management/index.php?node=report&sub=user-track-disp&hostID=0&userID=test12323544325=
is there a way to do this? and save the PDF to a folder? i could then set up a script to name the files from id’s to user names then have it email
it would be great if you could do this on all workstations within a group
Thanks
Hi Tob
i was running dnsmasq without any issue
are you using dnsmasq for a DNS server or just to pick up your fog server on PXE boot without needing to mod you DHCP server?
is that all of your ltsp.conf?
when PXE booting does it redirect to your fog server?
At revision 1838.
…/lib/ubuntu/functions.sh: line 309: [: : unary operator expected
Script started on Sat 14 Jun 2014 16:19:54 BST
Ubuntu
…#######:. …,#,… .::##::.
.:###### .:;####:…;#;…
…##… …##;,;##::::.##…
,# …##…##:::## …::
## .::###,##. . ##.::#.:######::.
…##:::###::…#. … .#…#. #…#:::.
…:####:… …##…##::## … #
# . …##:,;##;:::#: … ##…
.# . .:;####;::::.##:::;#:…
# …:;###…
###########################################
###########################################
Version: 1.1.1 Installer/Updater
It is not recommended that you install this on a production system
as this script modifies many of your system settings.
This script should be run by the root user on Redhat or with sudo on Ubuntu.
** Notice ** Redhat users will need to disable SELinux and iptables in
order to use FOG
Please see our wiki for more information at [url]http://www.fogproject.org/wiki[/url]
Here are the settings FOG will use:
Base Linux: Debian
Detected Linux Distribution: Ubuntu
Installation Type: Normal Server
Server IP Address: 172.18.130.197
DHCP router Address:
DHCP DNS Address:
Interface: eth0
Using FOG DHCP: 0
Internationalization: 0
Donate: 0
DHCP will NOT be setup but you must setup your
current DHCP server to use FOG for PXE services.
On a Linux DHCP server you must set:
next-server
On a Windows DHCP server you must set:
option 066 & 067
Option 066 is the IP of the FOG Server: (e.g. 172.18.130.197
Option 067 is the undionly.kpxe file: (e.g. undionly.kpxe)
Are you sure you wish to continue (Y/N) y
Installation Started…
Installing required packages, if this fails
make sure you have an active internet connection.
when installing SVN
its also worth mentioning that until today my apache2 error logs we 90kb to 150kb however today its 10mb
i have been running 0.32 for some time without issue, yesterday i updated to 1.1.0 and today i went to 1.1.1
re install just done foginstall.log below (no issues that i can see)
Script started on Sat 14 Jun 2014 15:50:24 BST
..#######:. ..,#,.. .::##::.
.:###### .:;####:…;#;…
…##… …##;,;##::::.##…
,# …##…##:::## …::
## .::###,##. . ##.::#.:######::.
…##:::###::…#. … .#…#. #…#:::.
…:####:… …##…##::## … #
# . …##:,;##;:::#: … ##…
.# . .:;####;::::.##:::;#:…
# …:;###…
###########################################
###########################################
Version: 1.1.1 Installer/Updater
Starting Debian / Ubuntu / Kubuntu / Edubuntu Installtion.
#####################################################################
FOG now has everything it needs to setup your server, but please
understand that this script will overwrite any setting you may
have setup for services like DHCP, apache, pxe, tftp, and NFS.
It is not recommended that you install this on a production system
as this script modifies many of your system settings.
This script should be run by the root user on Redhat or with sudo on Ubuntu.
** Notice ** Redhat users will need to disable SELinux and iptables in
order to use FOG
Please see our wiki for more information at [url]http://www.fogproject.org/wiki[/url]
Here are the settings FOG will use:
Base Linux: Debian
Detected Linux Distribution: Ubuntu
Installation Type: Normal Server
Server IP Address: 172.18.130.197
DHCP router Address:
DHCP DNS Address:
Interface: eth0
Using FOG DHCP: 0
Internationalization: 0
Donate: 0
DHCP will NOT be setup but you must setup your
current DHCP server to use FOG for PXE services.
On a Linux DHCP server you must set:
next-server
On a Windows DHCP server you must set:
option 066 & 067
Option 066 is the IP of the FOG Server: (e.g. 172.18.130.197
Option 067 is the undionly.kpxe file: (e.g. undionly.kpxe)
Are you sure you wish to continue (Y/N) y
Installation Started…
Installing required packages, if this fails
make sure you have an active internet connection.
Preparing apt-get
Installing package: apache2
Installing package: php5
Installing package: php5-json
Installing package: php5-gd
Installing package: php5-cli
Installing package: php5-mysql
Installing package: php5-curl
Installing package: mysql-server
We are about to install MySQL Server on
this server, if MySQL isn’t installed already
you will be prompted for a root password.
Press enter to acknowledge this message.
Reading package lists…
Building dependency tree…
Reading state information…
mysql-server is already the newest version.
The following packages were automatically installed and are no longer required:
linux-headers-2.6.32-38 libtommath0 linux-headers-2.6.32-38-server
Use ‘apt-get autoremove’ to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Confirming package installation.
Configuring services.
Setting up fog user…Exists
Setting up and starting MySql…OK
Backing up user reports…OK
Did you leave the mysql password blank during install? (Y/n) n
Please enter your mysql password:
Please re-enter your mysql password:
Setting up and starting Apache Web Server…OK
You still need to install/update your database schema.
This can be done by opening a web browser and going to:
Press [Enter] key when database is updated/installed.
Would you like to notify the FOG group about this installation?
* This information is only used to help the FOG group determine
if FOG is being used. This information helps to let us know
if we should keep improving this product.
Send notification? (Y/N)n
NOT sending notification.
Setup complete!
You can now login to the FOG Management Portal using
the information listed below. The login information
is only if this is the first install.
This can be done by opening a web browser and going to:
[url]http://172.18.130.197/fog/management[/url]
Default User:
Username: fog
Password: password
Script done on Sat 14 Jun 2014 15:52:57 BST
this is line 64 from /var/www/fog/lib/db/MySQL.class.php
if (!$this->link = new mysqli($this->host, $this->user, $this->pass))
i have 122 entries of below in today’s Apache log. why is it using password: NO?
[Sat Jun 14 09:45:18 2014] [error] [client 172.18.129.59] PHP Warning: mysqli::mysqli(): (28000/1045): Access denied for user ‘root’@‘localhost’ (using password: NO) in /var/www/fog/lib/db/MySQL.class.php on line 64
in config .php
define(‘DATABASE_PASSWORD’,‘Mypassword’);
is set
maybe not the password is in /var/www/fog/commons config.php
think i might have found the issue
mysqli::mysqli(): (28000/1045): Access denied for user ‘root’@‘localhost’ (using password: NO)
my Apache error log is like 9mb for today full of
[Sat Jun 14 14:36:24 2014] [error] an unknown filter was not added: PHP
and
Sat Jun 14 14:35:28 2014] [error] [client 172...*] PHP Fatal error: Call to a member function get() on a non-object in /var/www/fog/lib/fog/Host.class.php on line 639, referer: [url]http://172.18.130.197/fog/management/index.php?node=host&sub=deploy&id=8&type=14[/url]
and
[Sat Jun 14 09:42:51 2014] [error] [client 172...*] PHP Warning: mysqli::escape_string(): Couldn’t fetch mysqli in /var/www/fog/lib/db/MySQL.class.php on line 247