Posts made by thegiantcat

thegiantcat

I rebooted the server, and recreated / restarted the task. After this it completed without issue.

thegiantcat

I’m having an issue capturing an image.

The device is a dell latitude 5570,
Fog Version 1.5.5
When I first registered the host, it failed however I switched the device from UEFI to legacy in it’s BIOS and it went through and registered fine.

I then went into the fog management screen, created a new image, set the opperating system to windows 10 and made a task to capture an image for this the next time the above device boots. However the completion percentage does not progress past 2.31% the time to completion just grows exponentially, additionally the screen I am capturing the image on looks “messed up”. Tried including a picture but kept getting errors.

I let the default go through on about everything when registering the device except Hostname. I was kinda hoping on some ideas on where to go from here, the device is still powered on and “imaging” if you need further info let me know.

thegiantcat

@Sebastian-Roth
Thank you so much, I missed it when you originally said that, running it with --exitFail didn’t work, however running it with -X did work. After this I was able to update/install the schema and actually log into the server via the web interface.

Additionally I tested booting to the server via PXE and was able too!

thegiantcat

@Sebastian-Roth
I do not have the requested directory(php-fpm) under/var/log,
/var/log also doesn’t have an www-error.log
I also checked just to be through and there isn’t a log under
/etc/php/7.0/fpm

thegiantcat

@Tom-Elliott
Also here is the error part from the log about when it gets to “Backing up databases”

Dec 06 12:23:00 zstsvreefog systemd[1]: Starting The PHP 7.0 FastCGI Process Manager...
Dec 06 12:23:00 zstsvreefog systemd[1]: Started The PHP 7.0 FastCGI Process Manager.
--2018-12-06 12:23:02--  http://172.24.28.71//fog//maintenance/backup_db.php
Connecting to 172.22.0.102:3128... connected.
Proxy request sent, awaiting response... 302 Found
Could not parse String-Transport-Security header
Location: ?node=schema [following]
--2018-12-06 12:23:03--  http://172.24.28.71//fog//maintenance/backup_db.php?node=schema
Connecting to 172.22.0.102:3128... connected.
Proxy request sent, awaiting response... 500 Internal Server Error
2018-12-06 12:23:04 ERROR 500: Internal Server Error.

This is before making the requested change after the requested change i get

Dec 06 13:31:46 zstsvreefog systemd[1]: Starting The PHP 7.0 FastCGI Process Manager...
Dec 06 13:31:46 zstsvreefog systemd[1]: Started The PHP 7.0 FastCGI Process Manager.
--2018-12-06 13:31:48--  http://172.24.28.71//fog//maintenance/backup_db.php
Connecting to 172.24.28.71:80... connected.
HTTP request sent, awaiting response... 302 Found
Could not parse String-Transport-Security header
Location: ?node=schema [following]
--2018-12-06 13:31:48--  http://172.24.28.71//fog//maintenance/backup_db.php?node=schema
Connecting to 172.24.28.71:80... connected.
HTTP request sent, awaiting response... 500 Internal Server Error
2018-12-06 13:31:48 ERROR 500: Internal Server Error.

The cert on the proxy server is self signed, i assume that its failing because of that, is there a way to start the installation and ignore this? Or a way to add it as a trusted site?

thegiantcat

@Tom-Elliott
No,

The fog server is seperate from the proxy.

thegiantcat

@Tom-Elliott
My wgetrc file contains

http_proxy = http://172.22.0.102:3128
use_proxy = on
no_proxy="localhost",127.0.0.0/8,172.22.0.102

I’m not showing a hidden file for curl under ~/ or a config file for curl under /etc/curlrc

I edited my .bashrc to contain the following

export http_proxy=<http://172.22.0.102>
export rsync_proxy=$http_proxy
export https_proxy=$http_proxy
export ftp_proxy=$http_proxy
export no_proxy="localhost,127.0.0.1,localhost.localadmin,127.0.0.1,172.22.0.102"

Is the syntax for that correct, I re-booted the machine after making the change. However its still looking like no dice. (at this point it actually failed at getting binaries

I made the following changes and it was able to get the binaries but it still failed at backing up the database

export http_proxy="http://172.22.0.102:3128"
export rsync_proxy=$http_proxy
export https_proxy=$http_proxy
export ftp_proxy=$http_proxy
export no_proxy="localhost,127.0.0.1,localhost.localadmin,127.0.0.1,172.22.0.102"

thegiantcat

@Sebastian-Roth
Apache2 shows running
The php log file mentioned only contains the following

[02-Dec-2018 06:25:02] NOTICE: error log file re-opened
[04-Dec-2018 09:42:25] NOTICE: Terminating ...
[04-Dec-2018 09:42:25] NOTICE: exiting, bye-bye!
[04-Dec-2018 10:08:03] NOTICE: fpm is running, pid 465
[04-Dec-2018 10:08:04] NOTICE: ready to handle connections
[04-Dec-2018 10:08:04] NOTICE: systemd monitor interval set to 10000ms
[04-Dec-2018 11:59:51] NOTICE: Terminating ...
[04-Dec-2018 11:59:51] NOTICE: exiting, bye-bye!
[04-Dec-2018 12:00:25] NOTICE: fpm is running, pid 470
[04-Dec-2018 12:00:25] NOTICE: ready to handle connections
[04-Dec-2018 12:00:25] NOTICE: systemd monitor interval set to 10000ms
[05-Dec-2018 13:42:01] NOTICE: Terminating ...
[05-Dec-2018 13:42:01] NOTICE: exiting, bye-bye!
[05-Dec-2018 14:09:03] NOTICE: fpm is running, pid 8503
[05-Dec-2018 14:09:03] NOTICE: ready to handle connections
[05-Dec-2018 14:09:03] NOTICE: systemd monitor interval set to 10000ms
[05-Dec-2018 14:11:37] NOTICE: Terminating ...
[05-Dec-2018 14:11:37] NOTICE: exiting, bye-bye!
[05-Dec-2018 14:12:21] NOTICE: fpm is running, pid 9732
[05-Dec-2018 14:12:21] NOTICE: ready to handle connections
[05-Dec-2018 14:12:21] NOTICE: systemd monitor interval set to 10000ms
[05-Dec-2018 14:15:19] NOTICE: Terminating ...
[05-Dec-2018 14:15:19] NOTICE: exiting, bye-bye!
[05-Dec-2018 14:16:11] NOTICE: fpm is running, pid 11029
[05-Dec-2018 14:16:11] NOTICE: ready to handle connections
[05-Dec-2018 14:16:11] NOTICE: systemd monitor interval set to 10000ms
[05-Dec-2018 14:18:55] NOTICE: Terminating ...
[05-Dec-2018 14:18:55] NOTICE: exiting, bye-bye!
[05-Dec-2018 14:19:53] NOTICE: fpm is running, pid 12261
[05-Dec-2018 14:19:53] NOTICE: ready to handle connections
[05-Dec-2018 14:19:53] NOTICE: systemd monitor interval set to 10000ms
[05-Dec-2018 14:28:53] NOTICE: Terminating ...
[05-Dec-2018 14:28:53] NOTICE: exiting, bye-bye!
[05-Dec-2018 14:30:01] NOTICE: fpm is running, pid 13502
[05-Dec-2018 14:30:01] NOTICE: ready to handle connections
[05-Dec-2018 14:30:01] NOTICE: systemd monitor interval set to 10000ms
[05-Dec-2018 15:01:27] NOTICE: Terminating ...
[05-Dec-2018 15:01:27] NOTICE: exiting, bye-bye!
[05-Dec-2018 15:03:14] NOTICE: fpm is running, pid 14933
[05-Dec-2018 15:03:14] NOTICE: ready to handle connections
[05-Dec-2018 15:03:14] NOTICE: systemd monitor interval set to 10000ms
[05-Dec-2018 15:09:21] NOTICE: Terminating ...
[05-Dec-2018 15:09:21] NOTICE: exiting, bye-bye!
[05-Dec-2018 15:10:18] NOTICE: fpm is running, pid 16312
[05-Dec-2018 15:10:18] NOTICE: ready to handle connections
[05-Dec-2018 15:10:18] NOTICE: systemd monitor interval set to 10000ms
[05-Dec-2018 15:29:00] NOTICE: Terminating ...
[05-Dec-2018 15:29:00] NOTICE: exiting, bye-bye!
[05-Dec-2018 15:30:52] NOTICE: fpm is running, pid 18904
[05-Dec-2018 15:30:52] NOTICE: ready to handle connections
[05-Dec-2018 15:30:52] NOTICE: systemd monitor interval set to 10000ms
[05-Dec-2018 15:39:08] NOTICE: Terminating ...
[05-Dec-2018 15:39:08] NOTICE: exiting, bye-bye!
[05-Dec-2018 15:40:03] NOTICE: fpm is running, pid 20203
[05-Dec-2018 15:40:03] NOTICE: ready to handle connections
[05-Dec-2018 15:40:03] NOTICE: systemd monitor interval set to 10000ms
[05-Dec-2018 15:54:07] NOTICE: Terminating ...
[05-Dec-2018 15:54:07] NOTICE: exiting, bye-bye!
[05-Dec-2018 15:54:39] NOTICE: fpm is running, pid 470
[05-Dec-2018 15:54:39] NOTICE: ready to handle connections
[05-Dec-2018 15:54:39] NOTICE: systemd monitor interval set to 10000ms
[05-Dec-2018 15:56:55] NOTICE: Terminating ...
[05-Dec-2018 15:56:55] NOTICE: exiting, bye-bye!
[05-Dec-2018 15:57:56] NOTICE: fpm is running, pid 2079
[05-Dec-2018 15:57:56] NOTICE: ready to handle connections
[05-Dec-2018 15:57:56] NOTICE: systemd monitor interval set to 10000ms
[06-Dec-2018 11:15:22] NOTICE: Terminating ...
[06-Dec-2018 11:15:22] NOTICE: exiting, bye-bye!
[06-Dec-2018 11:16:06] NOTICE: fpm is running, pid 6848
[06-Dec-2018 11:16:06] NOTICE: ready to handle connections
[06-Dec-2018 11:16:06] NOTICE: systemd monitor interval set to 10000ms

The apache2 error log also doesn’t seem to be throwing to many errors

[Thu Dec 06 06:25:02.506492 2018] [mpm_prefork:notice] [pid 2080] AH00163: Apache/2.4.25 (Debian) OpenSSL/1.0.2l configured -- resuming normal operations
[Thu Dec 06 06:25:02.506529 2018] [core:notice] [pid 2080] AH00094: Command line: '/usr/sbin/apache2'
[Thu Dec 06 11:15:22.443225 2018] [mpm_prefork:notice] [pid 2080] AH00169: caught SIGTERM, shutting down
[Thu Dec 06 11:16:06.707548 2018] [mpm_prefork:notice] [pid 6849] AH00163: Apache/2.4.25 (Debian) OpenSSL/1.0.2l configured -- resuming normal operations
[Thu Dec 06 11:16:06.707626 2018] [core:notice] [pid 6849] AH00094: Command line: '/usr/sbin/apache2'

However, after doing some digging I thing i found a clue, if I disable the setting in /etc/wgetrc “no_proxy=“localhost”” it fails on “Downloading Binaries” if I have this enabled it fails on “Backing up Database” this backup isn’t using FTP is it?

Unfortunately due to the location, this machine has to go through a proxy to access the internet, is it possible to skip this step in the installation?

thegiantcat

@Sebastian-Roth

Alright, I’m re-cloning the git repository and will re-perform the install and see what happens.

Alright, after reclonining and trying to install it fails to download the binaries.
I fixed this by running export http_proxy=http://myproxyserver:port
However, now it gets to backing up databases and fails. Is this due to a setting because I’m behind a proxy?

I’ve included the fog_install error log below if it helps.

   #      It will prepend the running with sudo if root is not set      #
   ######################################################################
   #           ** Notice ** FOG is difficult to setup securely          #
   #        SELinux and IPTables are usually asked to be disabled       #
   #           There have been strides in adding capabilities           #
   #          The recommendations would now be more appropriate         #
   #    to set SELinux to permissive and to disable firewall for now.   #
   #  You can find some methods to enable SELinux and maintain firewall #
   #   settings and ports. If you feel comfortable doing so please do   #
   ######################################################################
   #            Please see our wiki for more information at:            #
   ######################################################################
   #             https://wiki.fogproject.org/wiki/index.php             #
   ######################################################################

 * Here are the settings FOG will use:
 * Base Linux: Debian
 * Detected Linux Distribution: Debian GNU/Linux
 * Server IP Address: 172.24.28.71
 * Server Subnet Mask: 255.255.254.0
 * Interface: enp2s0
 * Installation Type: Normal Server
 * Internationalization: 0
 * Image Storage Location: /images
 * Using FOG DHCP: Yes
 * DHCP router Address: 172.24.28.1


 * Are you sure you wish to continue (Y/N)
 * Installation Started

 * Installing required packages, if this fails
 | make sure you have an active internet connection.

 * Adding needed repository....................................OK
 * Preparing Package Manager...................................OK
 * Packages to be installed:

        apache2 bc build-essential cpp curl g++ gawk gcc genisoimage gzip htmldoc isc-dhcp-server isolinux lftp libapache2-mod-php7.0 libc6 libcurl3 liblzma-dev m4 mysql-client mysql-server net-tools nfs-kernel-server openssh-server php7.0 php7.0-bcmath php7.0-cli php7.0-curl php7.0-fpm php7.0-gd php7.0-json php7.0-mbstring php7.0-mysql php7.0-mysqlnd php-gettext sysv-rc-conf tar tftpd-hpa tftp-hpa unzip vsftpd wget xinetd zlib1g


 * Skipping package:   apache2.................................(Already Installed)
 * Skipping package:   bc......................................(Already Installed)
 * Skipping package:   build-essential.........................(Already Installed)
 * Skipping package:   cpp.....................................(Already Installed)
 * Skipping package:   curl....................................(Already Installed)
 * Skipping package:   g++.....................................(Already Installed)
 * Skipping package:   gawk....................................(Already Installed)
 * Skipping package:   gcc.....................................(Already Installed)
 * Skipping package:   genisoimage.............................(Already Installed)
 * Skipping package:   gzip....................................(Already Installed)
 * Skipping package:   htmldoc.................................(Already Installed)
 * Skipping package:   isc-dhcp-server.........................(Already Installed)
 * Skipping package:   isolinux................................(Already Installed)
 * Skipping package:   lftp....................................(Already Installed)
 * Skipping package:   libapache2-mod-php7.0...................(Already Installed)
 * Skipping package:   libc6...................................(Already Installed)
 * Skipping package:   libcurl3................................(Already Installed)
 * Skipping package:   liblzma-dev.............................(Already Installed)
 * Skipping package:   m4......................................(Already Installed)
 * Skipping package:   mysql-client............................(Already Installed)
 * Skipping package:   mysql-server............................(Already Installed)
 * Skipping package:   net-tools...............................(Already Installed)
 * Skipping package:   nfs-kernel-server.......................(Already Installed)
 * Skipping package:   openssh-server..........................(Already Installed)
 * Skipping package:   php7.0..................................(Already Installed)
 * Skipping package:   php7.0-bcmath...........................(Already Installed)
 * Skipping package:   php7.0-cli..............................(Already Installed)
 * Skipping package:   php7.0-curl.............................(Already Installed)
 * Skipping package:   php7.0-fpm..............................(Already Installed)
 * Skipping package:   php7.0-gd...............................(Already Installed)
 * Skipping package:   php7.0-json.............................(Already Installed)
 * Skipping package:   php7.0-mbstring.........................(Already Installed)
 * Skipping package:   php7.0-mysql............................(Already Installed)
 * Skipping package:   php7.0-mysql............................(Already Installed)
 * Skipping package:   php-gettext.............................(Already Installed)
 * Skipping package:   sysv-rc-conf............................(Already Installed)
 * Skipping package:   tar.....................................(Already Installed)
 * Skipping package:   tftpd-hpa...............................(Already Installed)
 * Skipping package:   tftp-hpa................................(Already Installed)
 * Skipping package:   unzip...................................(Already Installed)
 * Skipping package:   vsftpd..................................(Already Installed)
 * Skipping package:   wget....................................(Already Installed)
 * Skipping package:   xinetd..................................(Already Installed)
 * Skipping package:   zlib1g..................................(Already Installed)
 * Updating packages as needed.................................OK

 * Confirming package installation

 * Checking package: apache2...................................OK
 * Checking package: bc........................................OK
 * Checking package: build-essential...........................OK
 * Checking package: cpp.......................................OK
 * Checking package: curl......................................OK
 * Checking package: g++.......................................OK
 * Checking package: gawk......................................OK
 * Checking package: gcc.......................................OK
 * Checking package: genisoimage...............................OK
 * Checking package: gzip......................................OK
 * Checking package: htmldoc...................................OK
 * Checking package: isc-dhcp-server...........................OK
 * Checking package: isolinux..................................OK
 * Checking package: lftp......................................OK
 * Checking package: libapache2-mod-php7.0.....................OK
 * Checking package: libc6.....................................OK
 * Checking package: libcurl3..................................OK
 * Checking package: liblzma-dev...............................OK
 * Checking package: m4........................................OK
 * Checking package: mysql-client..............................OK
 * Checking package: mysql-server..............................OK
 * Checking package: net-tools.................................OK
 * Checking package: nfs-kernel-server.........................OK
 * Checking package: openssh-server............................OK
 * Checking package: php7.0....................................OK
 * Checking package: php7.0-bcmath.............................OK
 * Checking package: php7.0-cli................................OK
 * Checking package: php7.0-curl...............................OK
 * Checking package: php7.0-fpm................................OK
 * Checking package: php7.0-gd.................................OK
 * Checking package: php7.0-json...............................OK
 * Checking package: php7.0-mbstring...........................OK
 * Checking package: php7.0-mysql..............................OK
 * Checking package: php-gettext...............................OK
 * Checking package: sysv-rc-conf..............................OK
 * Checking package: tar.......................................OK
 * Checking package: tftpd-hpa.................................OK
 * Checking package: tftp-hpa..................................OK
 * Checking package: unzip.....................................OK
 * Checking package: vsftpd....................................OK
 * Checking package: wget......................................OK
 * Checking package: xinetd....................................OK
 * Checking package: zlib1g....................................OK

 * Configuring services

 * Setting up fog user.........................................Already setup
 * Setting up fog password.....................................OK
 * Stopping FOGMulticastManager.service Service................OK
 * Stopping FOGImageReplicator.service Service.................OK
 * Stopping FOGSnapinReplicator.service Service................OK
 * Stopping FOGScheduler.service Service.......................OK
 * Stopping FOGPingHosts.service Service.......................OK
 * Stopping FOGSnapinHash.service Service......................OK
 * Stopping FOGImageSize.service Service.......................OK
 * Setting up and starting MySQL...............................OK
 * Backing up user reports.....................................Done
 * Stopping web service........................................OK
 * Removing vhost file.........................................OK
 * Is the MySQL password blank? (Y/n)  * Stopping FOGMulticastManager.service Service................OK
 * Stopping FOGImageReplicator.service Service.................OK
 * Stopping FOGSnapinReplicator.service Service................OK
 * Stopping FOGScheduler.service Service.......................OK
 * Stopping FOGPingHosts.service Service.......................OK
 * Stopping FOGSnapinHash.service Service......................OK
 * Stopping FOGImageSize.service Service.......................OK
 * Setting up and starting MySQL...............................OK
 * Setting up Apache and PHP files.............................OK
 * Testing and removing symbolic links if found................OK
 * Backing up old data.........................................OK
 * Copying new files to web folder.............................OK
 * Creating config file........................................OK
 * Unzipping the binaries......................................Done
 * Copying binaries where needed...............................Done
 * Enabling apache and fpm services on boot....................OK
 * Creating SSL CA.............................................OK
 * Creating SSL Private Key....................................OK
 * Creating SSL Certificate....................................OK
 * Creating auth pub key and cert..............................OK
 * Resetting SSL Permissions...................................OK
 * Setting up Apache virtual host (no SSL).....................OK
 * Starting and checking status of web services................OK
 * Changing permissions on apache log files....................OK
 * Backing up database.........................................Failed!```

thegiantcat

@Sebastian-Roth
Here ya go.

configureMySql() {
    stopInitScript
    dots "Setting up and starting MySQL"
#    for mysqlconf in $(grep -rl '.*skip-networking' /etc | grep -v init.d); do
#        sed -i '/.*skip-networking/ s/^#*/#/' -i $mysqlconf >>$workingdir/error_logs/fog_error_${version}.log 2>&1
    done
#    for mysqlconf in `grep -rl '.*bind-address.*=.*127.0.0.1' /etc | grep -v init.d`; do
#        sed -e '/.*bind-address.*=.*127.0.0.1/ s/^#*/#/' -i $mysqlconf >>$workingdir/error_logs/fog_error_${version}.log 2>&1
    done
    if [[ $systemctl == yes ]]; then
        if [[ $osid -eq 3 ]]; then
--
    configureMySql
    mysqlver=$(echo $mysqlver | awk -F'([.])' '{print $1"."$2}')
    runTest=$(echo "$mysqlver < $vertocheck" | bc)
    if [[ $runTest -eq 0 ]]; then
        [[ -z $snmysqlhost ]] && snmysqlhost='localhost'
        [[ -z $snmysqluser ]] && snmysqluser='root'
        case $snmysqlhost in
            127.0.0.1|[Ll][Oo][Cc][Aa][Ll][Hh][Oo][Ss][Tt])
                sql="UPDATE mysql.user SET plugin='mysql_native_password' WHERE User='root';"
                mysql "${options}" -e "$sql" >>$workingdir/error_logs/fog_error_${version}.log 2>&1
                sql="ALTER USER '$snmysqluser'@'127.0.0.1' IDENTIFIED WITH mysql_native_password BY '$sqlescsnmysqlpass';"

thegiantcat

@Sebastian-Roth
Here is the returned info.
0_1544024050517_debug2.log

thegiantcat

@Sebastian-Roth

Here is the log file. 0_1543949080446_debug.log

thegiantcat

@Sebastian-Roth
Super sorry for the late response, however I was out of town over the weekend and didn’t have access to a way to access this machine. Here is the info you requested.

root@zstsvreefog:/etc/fogproject# echo $SHELL
/bin/bash
root@zstsvreefog:/etc/fogproject# ls -al $(echo $SHELL)
-rwxr-xr-x 1 root root 1265272 May 15  2017 /bin/bash
root@zstsvreefog:/etc/fogproject# whoami
root
root@zstsvreefog:/etc/fogproject# ls -al lib/common/
total 152
drwxr-xr-x 2 root root   4096 Nov 28 11:02 .
drwxr-xr-x 6 root root   4096 Nov 28 10:47 ..
-rwxr-xr-x 1 root root   3909 Nov 28 10:47 config.sh
-rwxr-xr-x 1 root root 119144 Nov 28 11:02 functions.sh
-rwxr-xr-x 1 root root  13955 Nov 28 10:47 input.sh
-rw-r--r-- 1 root root   1766 Nov 28 10:47 utils.sh
root@zstsvreefog:/etc/fogproject#

thegiantcat

@Sebastian-Roth
I don’t believe I am, only thing changed from defaults during the setup was manual disk provision to use a volume group and installation of no ui. I could check when I get back in the office, I’ll be out and away from the system, however I can do what I can to get to it before Sunday.

thegiantcat

@Sebastian-Roth

Here is what is in the fog-install.log under /error_logs/

./installfog.sh: line 366: displayBanner: command not found
   Version: 1.5.5 Installer/Updater

Not able to find an interface with an active internet connection. Trying alternative methods for determining the interface.
  What version of Linux would you like to run the installation for?

          1) Redhat Based Linux (Redhat, CentOS, Mageia)
          2) Debian Based Linux (Debian, Ubuntu, Kubuntu, Edubuntu)
          3) Arch Linux

  Choice: [2]


  Starting Debian based Installation


  FOG Server installation modes:
      * Normal Server: (Choice N)
          This is the typical installation type and
          will install all FOG components for you on this
          machine.  Pick this option if you are unsure what to pick.

      * Storage Node: (Choice S)
          This install mode will only install the software required
          to make this server act as a node in a storage group

  More information:
     http://www.fogproject.org/wiki/index.php?title=InstallationModes

  What type of installation would you like to do? [N/s (Normal/Storage)]
  What is the IP address to be used by this FOG Server? ["machine_IP"]
  Would you like to change the default network interface from enp2s0?
  If you are not sure, select No. [y/N]
  Would you like to setup a router address for the DHCP server? [Y/n]   What is the IP address to be used for the router on
      the DHCP server? ["gateway"]
  Would you like DHCP to handle DNS? [Y/n]   What DNS address should DHCP allow? ["dns"]
  Would you like to use the FOG server for DHCP service? [y/N]
  This version of FOG has internationalization support, would
  you like to install the additional language packs? [y/N]
   ######################################################################
   #     FOG now has everything it needs for this setup, but please     #
   #   understand that this script will overwrite any setting you may   #
   #   have setup for services like DHCP, apache, pxe, tftp, and NFS.   #
   ######################################################################
   # It is not recommended that you install this on a production system #
   #        as this script modifies many of your system settings.       #
   ######################################################################
   #             This script should be run by the root user.            #
   #      It will prepend the running with sudo if root is not set      #
   ######################################################################
   #           ** Notice ** FOG is difficult to setup securely          #
   #        SELinux and IPTables are usually asked to be disabled       #
   #           There have been strides in adding capabilities           #
   #          The recommendations would now be more appropriate         #
   #    to set SELinux to permissive and to disable firewall for now.   #
   #  You can find some methods to enable SELinux and maintain firewall #
   #   settings and ports. If you feel comfortable doing so please do   #
   ######################################################################
   #            Please see our wiki for more information at:            #
   ######################################################################
   #             https://wiki.fogproject.org/wiki/index.php             #
   ######################################################################

 * Here are the settings FOG will use:
 * Base Linux: Debian
 * Detected Linux Distribution: Debian GNU/Linux
 * Server IP Address: "machine_IP"
 * Server Subnet Mask: "subnet"
 * Interface: enp2s0
 * Installation Type: Normal Server
 * Internationalization: 0
 * Image Storage Location: /images
 * Using FOG DHCP: Yes
 * DHCP router Address: "gateway"


 * Are you sure you wish to continue (Y/N)
 * Installation Started

 * Installing required packages, if this fails
 | make sure you have an active internet connection.

 * Adding needed repository....................................OK
 * Preparing Package Manager...................................OK
 * Packages to be installed:

        apache2 bc build-essential cpp curl g++ gawk gcc genisoimage gzip htmldoc isc-dhcp-server isolinux lftp libapache2-mod-php7.0 libc6 libcurl3 liblzma-dev m4 mysql-client mysql-server net-tools nfs-kernel-server openssh-server php7.0 php7.0-bcmath php7.0-cli php7.0-curl php7.0-fpm php7.0-gd php7.0-json php7.0-mbstring php7.0-mysql php7.0-mysqlnd php-gettext sysv-rc-conf tar tftpd-hpa tftp-hpa unzip vsftpd wget xinetd zlib1g


 * Skipping package:   apache2.................................(Already Installed)
 * Skipping package:   bc......................................(Already Installed)
 * Skipping package:   build-essential.........................(Already Installed)
 * Skipping package:   cpp.....................................(Already Installed)
 * Skipping package:   curl....................................(Already Installed)
 * Skipping package:   g++.....................................(Already Installed)
 * Skipping package:   gawk....................................(Already Installed)
 * Skipping package:   gcc.....................................(Already Installed)
 * Skipping package:   genisoimage.............................(Already Installed)
 * Skipping package:   gzip....................................(Already Installed)
 * Skipping package:   htmldoc.................................(Already Installed)
 * Installing package: isc-dhcp-server.........................OK
 * Skipping package:   isolinux................................(Already Installed)
 * Skipping package:   lftp....................................(Already Installed)
 * Skipping package:   libapache2-mod-php7.0...................(Already Installed)
 * Skipping package:   libc6...................................(Already Installed)
 * Skipping package:   libcurl3................................(Already Installed)
 * Skipping package:   liblzma-dev.............................(Already Installed)
 * Skipping package:   m4......................................(Already Installed)
 * Skipping package:   mysql-client............................(Already Installed)
 * Skipping package:   mysql-server............................(Already Installed)
 * Skipping package:   net-tools...............................(Already Installed)
 * Skipping package:   nfs-kernel-server.......................(Already Installed)
 * Skipping package:   openssh-server..........................(Already Installed)
 * Skipping package:   php7.0..................................(Already Installed)
 * Skipping package:   php7.0-bcmath...........................(Already Installed)
 * Skipping package:   php7.0-cli..............................(Already Installed)
 * Skipping package:   php7.0-curl.............................(Already Installed)
 * Skipping package:   php7.0-fpm..............................(Already Installed)
 * Skipping package:   php7.0-gd...............................(Already Installed)
 * Skipping package:   php7.0-json.............................(Already Installed)
 * Skipping package:   php7.0-mbstring.........................(Already Installed)
 * Skipping package:   php7.0-mysql............................(Already Installed)
 * Skipping package:   php7.0-mysql............................(Already Installed)
 * Skipping package:   php-gettext.............................(Already Installed)
 * Skipping package:   sysv-rc-conf............................(Already Installed)
 * Skipping package:   tar.....................................(Already Installed)
 * Skipping package:   tftpd-hpa...............................(Already Installed)
 * Skipping package:   tftp-hpa................................(Already Installed)
 * Skipping package:   unzip...................................(Already Installed)
 * Skipping package:   vsftpd..................................(Already Installed)
 * Skipping package:   wget....................................(Already Installed)
 * Skipping package:   xinetd..................................(Already Installed)
 * Skipping package:   zlib1g..................................(Already Installed)
 * Updating packages as needed.................................OK

 * Confirming package installation

 * Checking package: apache2...................................OK
 * Checking package: bc........................................OK
 * Checking package: build-essential...........................OK
 * Checking package: cpp.......................................OK
 * Checking package: curl......................................OK
 * Checking package: g++.......................................OK
 * Checking package: gawk......................................OK
 * Checking package: gcc.......................................OK
 * Checking package: genisoimage...............................OK
 * Checking package: gzip......................................OK
 * Checking package: htmldoc...................................OK
 * Checking package: isc-dhcp-server...........................OK
 * Checking package: isolinux..................................OK
 * Checking package: lftp......................................OK
 * Checking package: libapache2-mod-php7.0.....................OK
 * Checking package: libc6.....................................OK
 * Checking package: libcurl3..................................OK
 * Checking package: liblzma-dev...............................OK
 * Checking package: m4........................................OK
 * Checking package: mysql-client..............................OK
 * Checking package: mysql-server..............................OK
 * Checking package: net-tools.................................OK
 * Checking package: nfs-kernel-server.........................OK
 * Checking package: openssh-server............................OK
 * Checking package: php7.0....................................OK
 * Checking package: php7.0-bcmath.............................OK
 * Checking package: php7.0-cli................................OK
 * Checking package: php7.0-curl...............................OK
 * Checking package: php7.0-fpm................................OK
 * Checking package: php7.0-gd.................................OK
 * Checking package: php7.0-json...............................OK
 * Checking package: php7.0-mbstring...........................OK
 * Checking package: php7.0-mysql..............................OK
 * Checking package: php-gettext...............................OK
 * Checking package: sysv-rc-conf..............................OK
 * Checking package: tar.......................................OK
 * Checking package: tftpd-hpa.................................OK
 * Checking package: tftp-hpa..................................OK
 * Checking package: unzip.....................................OK
 * Checking package: vsftpd....................................OK
 * Checking package: wget......................................OK
 * Checking package: xinetd....................................OK
 * Checking package: zlib1g....................................OK

 * Configuring services

./installfog.sh: line 543: configureUsers: command not found
./installfog.sh: line 587: configureMySql: command not found
 * Backing up user reports.....................................Done
./installfog.sh: line 589: configureHttpd: command not found
 * Backing up database.........................................OK

 * You still need to install/update your database schema.
 * This can be done by opening a web browser and going to:

   http://"machine_IP"/fog/management

 * Press [Enter] key when database is updated/installed.
./installfog.sh: line 592: configureStorage: command not found
./installfog.sh: line 593: configureDHCP: command not found
 * Setting up and starting TFTP and PXE Servers................OK
 * Setting up and starting VSFTP Server........................OK
./installfog.sh: line 596: configureSnapins: command not found
 * Setting up UDPCast..........................................OK
 * Configuring UDPCast.........................................OK
 * Building UDPCast............................................OK
 * Installing UDPCast..........................................OK
 * Installing FOG System Scripts...............................OK


 * Configuring FOG System Services


 * Setting permissions on FOGMulticastManager.service script...OK
 * Enabling FOGMulticastManager.service Service................OK
 * Setting permissions on FOGImageReplicator.service script....OK
 * Enabling FOGImageReplicator.service Service.................OK
 * Setting permissions on FOGSnapinReplicator.service script...OK
 * Enabling FOGSnapinReplicator.service Service................OK
 * Setting permissions on FOGScheduler.service script..........OK
 * Enabling FOGScheduler.service Service.......................OK
 * Setting permissions on FOGPingHosts.service script..........OK
 * Enabling FOGPingHosts.service Service.......................OK
 * Setting permissions on FOGSnapinHash.service script.........OK
 * Enabling FOGSnapinHash.service Service......................OK
 * Setting permissions on FOGImageSize.service script..........OK
 * Enabling FOGImageSize.service Service.......................OK
 * Setting up FOG Services.....................................OK
./installfog.sh: line 600: configureFOGService: command not found
./installfog.sh: line 601: configureNFS: command not found
./installfog.sh: line 602: writeUpdateFile: command not found
./installfog.sh: line 603: linkOptFogDir: command not found
 * Ensuring node username and passwords match..................Done

 * Setup complete

   You can now login to the FOG Management Portal using
   the information listed below.  The login information
   is only if this is the first install.

   This can be done by opening a web browser and going to:

   http://"machine_IP"/fog/management

   Default User Information
   Username: fog
   Password: password

thegiantcat

@Sebastian-Roth

Here ya go.

I actually manually deleted the fog site under var/www however the installation has been re-run since then.

Looks like its not seeing a file for the other one.

thegiantcat

@Sebastian-Roth
DUring the installation it tells me version 1.55 of fog. I just cloned the git repository this morning so I would assume its the latest version.

The only thing I have in the error log for appache is unfortunately, information from the service stopping/starting from reboots and reinstallation attempts of fog.

Additionally I noticed during the installation I get an error during the install about commands not being able to be found when doing the mysql portion of this, I have attached a screenshot if it is helpful.

thegiantcat

I am having an issue installing Debian 9.6 stretch.

The installation fails, it gets to a section asking to update the database schema by visiting http://ipaddress/fog/management however if i visit this address I get nothing as the address 404s, however under /var/www/ there is a fog directory and a fog/managment directory, I can load the machines default page so apache appears to be functioning.

Is there an issue with the version of Debian I am running (the latest stable release as of this morning) as well of the latest version of fog as of 9AM EST this morning. I read that it does not support PHP 5, will this be an issue going forward? Or is the issue somewhere else? Fog itself says it can’t detect an internet connection during the installation however after going through the prompts it can hit the internet and download all required packages.

If you need any further information please let me know…