I rebooted the server, and recreated / restarted the task. After this it completed without issue.
T
Latest posts made by thegiantcat
-
RE: Issue Capturing Imageposted in FOG Problems
-
Issue Capturing Imageposted in FOG Problems
I’m having an issue capturing an image.
The device is a dell latitude 5570,
Fog Version 1.5.5
When I first registered the host, it failed however I switched the device from UEFI to legacy in it’s BIOS and it went through and registered fine.I then went into the fog management screen, created a new image, set the opperating system to windows 10 and made a task to capture an image for this the next time the above device boots. However the completion percentage does not progress past 2.31% the time to completion just grows exponentially, additionally the screen I am capturing the image on looks “messed up”. Tried including a picture but kept getting errors.
I let the default go through on about everything when registering the device except Hostname. I was kinda hoping on some ideas on where to go from here, the device is still powered on and “imaging” if you need further info let me know.
-
RE: Issues during installation on Debian 9.6 stretchposted in FOG Problems
@Sebastian-Roth
Thank you so much, I missed it when you originally said that, running it with --exitFail didn’t work, however running it with -X did work. After this I was able to update/install the schema and actually log into the server via the web interface.Additionally I tested booting to the server via PXE and was able too!
-
RE: Issues during installation on Debian 9.6 stretchposted in FOG Problems
@Sebastian-Roth
I do not have the requested directory(php-fpm) under/var/log,
/var/log also doesn’t have an www-error.log
I also checked just to be through and there isn’t a log under
/etc/php/7.0/fpm -
RE: Issues during installation on Debian 9.6 stretchposted in FOG Problems
@Tom-Elliott
Also here is the error part from the log about when it gets to “Backing up databases”Dec 06 12:23:00 zstsvreefog systemd[1]: Starting The PHP 7.0 FastCGI Process Manager... Dec 06 12:23:00 zstsvreefog systemd[1]: Started The PHP 7.0 FastCGI Process Manager. --2018-12-06 12:23:02-- http://172.24.28.71//fog//maintenance/backup_db.php Connecting to 172.22.0.102:3128... connected. Proxy request sent, awaiting response... 302 Found Could not parse String-Transport-Security header Location: ?node=schema [following] --2018-12-06 12:23:03-- http://172.24.28.71//fog//maintenance/backup_db.php?node=schema Connecting to 172.22.0.102:3128... connected. Proxy request sent, awaiting response... 500 Internal Server Error 2018-12-06 12:23:04 ERROR 500: Internal Server Error.This is before making the requested change after the requested change i get
Dec 06 13:31:46 zstsvreefog systemd[1]: Starting The PHP 7.0 FastCGI Process Manager... Dec 06 13:31:46 zstsvreefog systemd[1]: Started The PHP 7.0 FastCGI Process Manager. --2018-12-06 13:31:48-- http://172.24.28.71//fog//maintenance/backup_db.php Connecting to 172.24.28.71:80... connected. HTTP request sent, awaiting response... 302 Found Could not parse String-Transport-Security header Location: ?node=schema [following] --2018-12-06 13:31:48-- http://172.24.28.71//fog//maintenance/backup_db.php?node=schema Connecting to 172.24.28.71:80... connected. HTTP request sent, awaiting response... 500 Internal Server Error 2018-12-06 13:31:48 ERROR 500: Internal Server Error.The cert on the proxy server is self signed, i assume that its failing because of that, is there a way to start the installation and ignore this? Or a way to add it as a trusted site?
-
RE: Issues during installation on Debian 9.6 stretchposted in FOG Problems
@Tom-Elliott
No,The fog server is seperate from the proxy.
-
RE: Issues during installation on Debian 9.6 stretchposted in FOG Problems
@Tom-Elliott
My wgetrc file containshttp_proxy = http://172.22.0.102:3128 use_proxy = on no_proxy="localhost",127.0.0.0/8,172.22.0.102I’m not showing a hidden file for curl under ~/ or a config file for curl under /etc/curlrc
I edited my .bashrc to contain the following
export http_proxy=<http://172.22.0.102> export rsync_proxy=$http_proxy export https_proxy=$http_proxy export ftp_proxy=$http_proxy export no_proxy="localhost,127.0.0.1,localhost.localadmin,127.0.0.1,172.22.0.102"Is the syntax for that correct, I re-booted the machine after making the change. However its still looking like no dice. (at this point it actually failed at getting binaries
I made the following changes and it was able to get the binaries but it still failed at backing up the database
export http_proxy="http://172.22.0.102:3128" export rsync_proxy=$http_proxy export https_proxy=$http_proxy export ftp_proxy=$http_proxy export no_proxy="localhost,127.0.0.1,localhost.localadmin,127.0.0.1,172.22.0.102" -
RE: Issues during installation on Debian 9.6 stretchposted in FOG Problems
@Sebastian-Roth
Apache2 shows running
The php log file mentioned only contains the following[02-Dec-2018 06:25:02] NOTICE: error log file re-opened [04-Dec-2018 09:42:25] NOTICE: Terminating ... [04-Dec-2018 09:42:25] NOTICE: exiting, bye-bye! [04-Dec-2018 10:08:03] NOTICE: fpm is running, pid 465 [04-Dec-2018 10:08:04] NOTICE: ready to handle connections [04-Dec-2018 10:08:04] NOTICE: systemd monitor interval set to 10000ms [04-Dec-2018 11:59:51] NOTICE: Terminating ... [04-Dec-2018 11:59:51] NOTICE: exiting, bye-bye! [04-Dec-2018 12:00:25] NOTICE: fpm is running, pid 470 [04-Dec-2018 12:00:25] NOTICE: ready to handle connections [04-Dec-2018 12:00:25] NOTICE: systemd monitor interval set to 10000ms [05-Dec-2018 13:42:01] NOTICE: Terminating ... [05-Dec-2018 13:42:01] NOTICE: exiting, bye-bye! [05-Dec-2018 14:09:03] NOTICE: fpm is running, pid 8503 [05-Dec-2018 14:09:03] NOTICE: ready to handle connections [05-Dec-2018 14:09:03] NOTICE: systemd monitor interval set to 10000ms [05-Dec-2018 14:11:37] NOTICE: Terminating ... [05-Dec-2018 14:11:37] NOTICE: exiting, bye-bye! [05-Dec-2018 14:12:21] NOTICE: fpm is running, pid 9732 [05-Dec-2018 14:12:21] NOTICE: ready to handle connections [05-Dec-2018 14:12:21] NOTICE: systemd monitor interval set to 10000ms [05-Dec-2018 14:15:19] NOTICE: Terminating ... [05-Dec-2018 14:15:19] NOTICE: exiting, bye-bye! [05-Dec-2018 14:16:11] NOTICE: fpm is running, pid 11029 [05-Dec-2018 14:16:11] NOTICE: ready to handle connections [05-Dec-2018 14:16:11] NOTICE: systemd monitor interval set to 10000ms [05-Dec-2018 14:18:55] NOTICE: Terminating ... [05-Dec-2018 14:18:55] NOTICE: exiting, bye-bye! [05-Dec-2018 14:19:53] NOTICE: fpm is running, pid 12261 [05-Dec-2018 14:19:53] NOTICE: ready to handle connections [05-Dec-2018 14:19:53] NOTICE: systemd monitor interval set to 10000ms [05-Dec-2018 14:28:53] NOTICE: Terminating ... [05-Dec-2018 14:28:53] NOTICE: exiting, bye-bye! [05-Dec-2018 14:30:01] NOTICE: fpm is running, pid 13502 [05-Dec-2018 14:30:01] NOTICE: ready to handle connections [05-Dec-2018 14:30:01] NOTICE: systemd monitor interval set to 10000ms [05-Dec-2018 15:01:27] NOTICE: Terminating ... [05-Dec-2018 15:01:27] NOTICE: exiting, bye-bye! [05-Dec-2018 15:03:14] NOTICE: fpm is running, pid 14933 [05-Dec-2018 15:03:14] NOTICE: ready to handle connections [05-Dec-2018 15:03:14] NOTICE: systemd monitor interval set to 10000ms [05-Dec-2018 15:09:21] NOTICE: Terminating ... [05-Dec-2018 15:09:21] NOTICE: exiting, bye-bye! [05-Dec-2018 15:10:18] NOTICE: fpm is running, pid 16312 [05-Dec-2018 15:10:18] NOTICE: ready to handle connections [05-Dec-2018 15:10:18] NOTICE: systemd monitor interval set to 10000ms [05-Dec-2018 15:29:00] NOTICE: Terminating ... [05-Dec-2018 15:29:00] NOTICE: exiting, bye-bye! [05-Dec-2018 15:30:52] NOTICE: fpm is running, pid 18904 [05-Dec-2018 15:30:52] NOTICE: ready to handle connections [05-Dec-2018 15:30:52] NOTICE: systemd monitor interval set to 10000ms [05-Dec-2018 15:39:08] NOTICE: Terminating ... [05-Dec-2018 15:39:08] NOTICE: exiting, bye-bye! [05-Dec-2018 15:40:03] NOTICE: fpm is running, pid 20203 [05-Dec-2018 15:40:03] NOTICE: ready to handle connections [05-Dec-2018 15:40:03] NOTICE: systemd monitor interval set to 10000ms [05-Dec-2018 15:54:07] NOTICE: Terminating ... [05-Dec-2018 15:54:07] NOTICE: exiting, bye-bye! [05-Dec-2018 15:54:39] NOTICE: fpm is running, pid 470 [05-Dec-2018 15:54:39] NOTICE: ready to handle connections [05-Dec-2018 15:54:39] NOTICE: systemd monitor interval set to 10000ms [05-Dec-2018 15:56:55] NOTICE: Terminating ... [05-Dec-2018 15:56:55] NOTICE: exiting, bye-bye! [05-Dec-2018 15:57:56] NOTICE: fpm is running, pid 2079 [05-Dec-2018 15:57:56] NOTICE: ready to handle connections [05-Dec-2018 15:57:56] NOTICE: systemd monitor interval set to 10000ms [06-Dec-2018 11:15:22] NOTICE: Terminating ... [06-Dec-2018 11:15:22] NOTICE: exiting, bye-bye! [06-Dec-2018 11:16:06] NOTICE: fpm is running, pid 6848 [06-Dec-2018 11:16:06] NOTICE: ready to handle connections [06-Dec-2018 11:16:06] NOTICE: systemd monitor interval set to 10000msThe apache2 error log also doesn’t seem to be throwing to many errors
[Thu Dec 06 06:25:02.506492 2018] [mpm_prefork:notice] [pid 2080] AH00163: Apache/2.4.25 (Debian) OpenSSL/1.0.2l configured -- resuming normal operations [Thu Dec 06 06:25:02.506529 2018] [core:notice] [pid 2080] AH00094: Command line: '/usr/sbin/apache2' [Thu Dec 06 11:15:22.443225 2018] [mpm_prefork:notice] [pid 2080] AH00169: caught SIGTERM, shutting down [Thu Dec 06 11:16:06.707548 2018] [mpm_prefork:notice] [pid 6849] AH00163: Apache/2.4.25 (Debian) OpenSSL/1.0.2l configured -- resuming normal operations [Thu Dec 06 11:16:06.707626 2018] [core:notice] [pid 6849] AH00094: Command line: '/usr/sbin/apache2'However, after doing some digging I thing i found a clue, if I disable the setting in /etc/wgetrc “no_proxy=“localhost”” it fails on “Downloading Binaries” if I have this enabled it fails on “Backing up Database” this backup isn’t using FTP is it?
Unfortunately due to the location, this machine has to go through a proxy to access the internet, is it possible to skip this step in the installation?
-
RE: Issues during installation on Debian 9.6 stretchposted in FOG Problems
Alright, I’m re-cloning the git repository and will re-perform the install and see what happens.
Alright, after reclonining and trying to install it fails to download the binaries.
I fixed this by running export http_proxy=http://myproxyserver:port
However, now it gets to backing up databases and fails. Is this due to a setting because I’m behind a proxy?I’ve included the fog_install error log below if it helps.
# It will prepend the running with sudo if root is not set # ###################################################################### # ** Notice ** FOG is difficult to setup securely # # SELinux and IPTables are usually asked to be disabled # # There have been strides in adding capabilities # # The recommendations would now be more appropriate # # to set SELinux to permissive and to disable firewall for now. # # You can find some methods to enable SELinux and maintain firewall # # settings and ports. If you feel comfortable doing so please do # ###################################################################### # Please see our wiki for more information at: # ###################################################################### # https://wiki.fogproject.org/wiki/index.php # ###################################################################### * Here are the settings FOG will use: * Base Linux: Debian * Detected Linux Distribution: Debian GNU/Linux * Server IP Address: 172.24.28.71 * Server Subnet Mask: 255.255.254.0 * Interface: enp2s0 * Installation Type: Normal Server * Internationalization: 0 * Image Storage Location: /images * Using FOG DHCP: Yes * DHCP router Address: 172.24.28.1 * Are you sure you wish to continue (Y/N) * Installation Started * Installing required packages, if this fails | make sure you have an active internet connection. * Adding needed repository....................................OK * Preparing Package Manager...................................OK * Packages to be installed: apache2 bc build-essential cpp curl g++ gawk gcc genisoimage gzip htmldoc isc-dhcp-server isolinux lftp libapache2-mod-php7.0 libc6 libcurl3 liblzma-dev m4 mysql-client mysql-server net-tools nfs-kernel-server openssh-server php7.0 php7.0-bcmath php7.0-cli php7.0-curl php7.0-fpm php7.0-gd php7.0-json php7.0-mbstring php7.0-mysql php7.0-mysqlnd php-gettext sysv-rc-conf tar tftpd-hpa tftp-hpa unzip vsftpd wget xinetd zlib1g * Skipping package: apache2.................................(Already Installed) * Skipping package: bc......................................(Already Installed) * Skipping package: build-essential.........................(Already Installed) * Skipping package: cpp.....................................(Already Installed) * Skipping package: curl....................................(Already Installed) * Skipping package: g++.....................................(Already Installed) * Skipping package: gawk....................................(Already Installed) * Skipping package: gcc.....................................(Already Installed) * Skipping package: genisoimage.............................(Already Installed) * Skipping package: gzip....................................(Already Installed) * Skipping package: htmldoc.................................(Already Installed) * Skipping package: isc-dhcp-server.........................(Already Installed) * Skipping package: isolinux................................(Already Installed) * Skipping package: lftp....................................(Already Installed) * Skipping package: libapache2-mod-php7.0...................(Already Installed) * Skipping package: libc6...................................(Already Installed) * Skipping package: libcurl3................................(Already Installed) * Skipping package: liblzma-dev.............................(Already Installed) * Skipping package: m4......................................(Already Installed) * Skipping package: mysql-client............................(Already Installed) * Skipping package: mysql-server............................(Already Installed) * Skipping package: net-tools...............................(Already Installed) * Skipping package: nfs-kernel-server.......................(Already Installed) * Skipping package: openssh-server..........................(Already Installed) * Skipping package: php7.0..................................(Already Installed) * Skipping package: php7.0-bcmath...........................(Already Installed) * Skipping package: php7.0-cli..............................(Already Installed) * Skipping package: php7.0-curl.............................(Already Installed) * Skipping package: php7.0-fpm..............................(Already Installed) * Skipping package: php7.0-gd...............................(Already Installed) * Skipping package: php7.0-json.............................(Already Installed) * Skipping package: php7.0-mbstring.........................(Already Installed) * Skipping package: php7.0-mysql............................(Already Installed) * Skipping package: php7.0-mysql............................(Already Installed) * Skipping package: php-gettext.............................(Already Installed) * Skipping package: sysv-rc-conf............................(Already Installed) * Skipping package: tar.....................................(Already Installed) * Skipping package: tftpd-hpa...............................(Already Installed) * Skipping package: tftp-hpa................................(Already Installed) * Skipping package: unzip...................................(Already Installed) * Skipping package: vsftpd..................................(Already Installed) * Skipping package: wget....................................(Already Installed) * Skipping package: xinetd..................................(Already Installed) * Skipping package: zlib1g..................................(Already Installed) * Updating packages as needed.................................OK * Confirming package installation * Checking package: apache2...................................OK * Checking package: bc........................................OK * Checking package: build-essential...........................OK * Checking package: cpp.......................................OK * Checking package: curl......................................OK * Checking package: g++.......................................OK * Checking package: gawk......................................OK * Checking package: gcc.......................................OK * Checking package: genisoimage...............................OK * Checking package: gzip......................................OK * Checking package: htmldoc...................................OK * Checking package: isc-dhcp-server...........................OK * Checking package: isolinux..................................OK * Checking package: lftp......................................OK * Checking package: libapache2-mod-php7.0.....................OK * Checking package: libc6.....................................OK * Checking package: libcurl3..................................OK * Checking package: liblzma-dev...............................OK * Checking package: m4........................................OK * Checking package: mysql-client..............................OK * Checking package: mysql-server..............................OK * Checking package: net-tools.................................OK * Checking package: nfs-kernel-server.........................OK * Checking package: openssh-server............................OK * Checking package: php7.0....................................OK * Checking package: php7.0-bcmath.............................OK * Checking package: php7.0-cli................................OK * Checking package: php7.0-curl...............................OK * Checking package: php7.0-fpm................................OK * Checking package: php7.0-gd.................................OK * Checking package: php7.0-json...............................OK * Checking package: php7.0-mbstring...........................OK * Checking package: php7.0-mysql..............................OK * Checking package: php-gettext...............................OK * Checking package: sysv-rc-conf..............................OK * Checking package: tar.......................................OK * Checking package: tftpd-hpa.................................OK * Checking package: tftp-hpa..................................OK * Checking package: unzip.....................................OK * Checking package: vsftpd....................................OK * Checking package: wget......................................OK * Checking package: xinetd....................................OK * Checking package: zlib1g....................................OK * Configuring services * Setting up fog user.........................................Already setup * Setting up fog password.....................................OK * Stopping FOGMulticastManager.service Service................OK * Stopping FOGImageReplicator.service Service.................OK * Stopping FOGSnapinReplicator.service Service................OK * Stopping FOGScheduler.service Service.......................OK * Stopping FOGPingHosts.service Service.......................OK * Stopping FOGSnapinHash.service Service......................OK * Stopping FOGImageSize.service Service.......................OK * Setting up and starting MySQL...............................OK * Backing up user reports.....................................Done * Stopping web service........................................OK * Removing vhost file.........................................OK * Is the MySQL password blank? (Y/n) * Stopping FOGMulticastManager.service Service................OK * Stopping FOGImageReplicator.service Service.................OK * Stopping FOGSnapinReplicator.service Service................OK * Stopping FOGScheduler.service Service.......................OK * Stopping FOGPingHosts.service Service.......................OK * Stopping FOGSnapinHash.service Service......................OK * Stopping FOGImageSize.service Service.......................OK * Setting up and starting MySQL...............................OK * Setting up Apache and PHP files.............................OK * Testing and removing symbolic links if found................OK * Backing up old data.........................................OK * Copying new files to web folder.............................OK * Creating config file........................................OK * Unzipping the binaries......................................Done * Copying binaries where needed...............................Done * Enabling apache and fpm services on boot....................OK * Creating SSL CA.............................................OK * Creating SSL Private Key....................................OK * Creating SSL Certificate....................................OK * Creating auth pub key and cert..............................OK * Resetting SSL Permissions...................................OK * Setting up Apache virtual host (no SSL).....................OK * Starting and checking status of web services................OK * Changing permissions on apache log files....................OK * Backing up database.........................................Failed!``` -
RE: Issues during installation on Debian 9.6 stretchposted in FOG Problems
@Sebastian-Roth
Here ya go.configureMySql() { stopInitScript dots "Setting up and starting MySQL" # for mysqlconf in $(grep -rl '.*skip-networking' /etc | grep -v init.d); do # sed -i '/.*skip-networking/ s/^#*/#/' -i $mysqlconf >>$workingdir/error_logs/fog_error_${version}.log 2>&1 done # for mysqlconf in `grep -rl '.*bind-address.*=.*127.0.0.1' /etc | grep -v init.d`; do # sed -e '/.*bind-address.*=.*127.0.0.1/ s/^#*/#/' -i $mysqlconf >>$workingdir/error_logs/fog_error_${version}.log 2>&1 done if [[ $systemctl == yes ]]; then if [[ $osid -eq 3 ]]; then -- configureMySql mysqlver=$(echo $mysqlver | awk -F'([.])' '{print $1"."$2}') runTest=$(echo "$mysqlver < $vertocheck" | bc) if [[ $runTest -eq 0 ]]; then [[ -z $snmysqlhost ]] && snmysqlhost='localhost' [[ -z $snmysqluser ]] && snmysqluser='root' case $snmysqlhost in 127.0.0.1|[Ll][Oo][Cc][Aa][Ll][Hh][Oo][Ss][Tt]) sql="UPDATE mysql.user SET plugin='mysql_native_password' WHERE User='root';" mysql "${options}" -e "$sql" >>$workingdir/error_logs/fog_error_${version}.log 2>&1 sql="ALTER USER '$snmysqluser'@'127.0.0.1' IDENTIFIED WITH mysql_native_password BY '$sqlescsnmysqlpass';"