In the BIOS on the configuration tab, disable Intel VMD Controller and disable Secure Boot on the security tab. This is the only way i’ve gotten this to image.
T
Best posts made by terrigan
-
RE: Lenovo E15 Gen2 won't PXE boot (bzImage)posted in FOG Problems
-
Lenovo P620posted in FOG Problems
I do not want to necrobump a post from the past but I can’t PXE this Lenovo Workstation. I have updated BIOS and NIC firmware and did a Kernel upgrade and recompiled PXE following instructions found in the Centos7 post for the same hardware. It uses the Marvell 10gb aQtion adapter. I received a DHCP address but dies on tftp loading of default.ipxe with a Connection Timed Out. Any help would be appreciated otherwise I’m stuck sending this out with the OEM image.
-
RE: Lenovo P620posted in FOG Problems
@george1421 So i’ve changed my policy in my DHCP scope for Bootfile Name to snp.efi. This machine does seem to not care. It keeps doing the same thing off of default.ipxe, failing. I tested a non P620 and it gets past default.ipxe and bootloads into Fog just fine.
