Yes my images were set to win 2000/win xp. I had to change them all back to windows 7. It still didnt solve my problem. For some reason the new version of FOG doesnt like this model of DELL. I am thinking about adding an intel ethernet card and disabling the integrated broadcom.
Posts made by SupEric
-
RE: Computer wont boot from hard drive after PXE from FOG
-
RE: Computer wont boot from hard drive after PXE from FOG
With grub as the FOG_BOOT_EXIT_TYPE it still says BOOTMGR is missing. It works with the old .32 version of FOG. Just since the upgrade to version 1.2 has it stopped working.
-
RE: Computer wont boot from hard drive after PXE from FOG
By changing the FOG_BOOT_EXIT_TYPE from sanboot to exit and back to sanboot in the version 1.2 of FOG I was able to get our DELL Precision T1600’s to work. The DELL Optiplex XE still say BOOTMGR is missing. Where is a good place to download an additional PXE boot image
-
RE: Computer wont boot from hard drive after PXE from FOG
Here is the install.log
I have searched around and not found anything yet . These machines are now telling me BOOTMGR is missing when it goes to booting from hardisk. I have other machines that are working.
Script started on Tue 12 Aug 2014 06:17:42 PM CDT Ubuntu ..#######:. ..,#,.. .::##::. .:###### .:;####:......;#;.. ...##... ...##;,;##::::.##... ,# ...##.....##:::## ..:: ## .::###,,##. . ##.::#.:######::. ...##:::###::....#. .. .#...#. #...#:::. ..:####:.. ..##......##::## .. # # . ...##:,;##;:::#: ... ##.. .# . .:;####;::::.##:::;#:.. # ..:;###.. ########################################### # FOG # # Free Computer Imaging Solution # # # # [url]http://www.fogproject.org/[/url] # # # # Developers: # # Chuck Syperski # # Jian Zhang # # Peter Gilchrist # # Tom Elliott # # GNU GPL Version 3 # ########################################### Version: 1.2.0 Installer/Updater * Found FOG Settings from previous install at: /opt/fog/.fogsettings * Performing upgrade using these settings... Starting Debian / Ubuntu / Kubuntu / Edubuntu Installtion. Would you like to donate computer resources to the FOG Project to mine cryptocurrency? This will only take place during active tasks and should NOT have any impact on performance of your imaging or other tasks. The currency will be used to pay for FOG Project expenses and to support the core developers working on the project. For more information see: [url]http://fogproject.org/?q=cryptocurrency[/url] Would you like to donate computer resources to the FOG Project? [y/N] n ##################################################################### FOG now has everything it needs to setup your server, but please understand that this script will overwrite any setting you may have setup for services like DHCP, apache, pxe, tftp, and NFS. It is not recommended that you install this on a production system as this script modifies many of your system settings. This script should be run by the root user on Redhat or with sudo on Ubuntu. ** Notice ** Redhat users will need to disable SELinux and iptables in order to use FOG Please see our wiki for more information at [url]http://www.fogproject.org/wiki[/url] Here are the settings FOG will use: Base Linux: Debian Detected Linux Distribution: Ubuntu Installation Type: Normal Server Server IP Address: 192.168.131.50 DHCP router Address: DHCP DNS Address: Interface: eth0 Using FOG DHCP: 0 Internationalization: 0 Donate: 0 DHCP will NOT be setup but you must setup your current DHCP server to use FOG for PXE services. On a Linux DHCP server you must set: next-server On a Windows DHCP server you must set: option 066 & 067 Option 066 is the IP of the FOG Server: (e.g. 192.168.131.50) Option 067 is the undionly.kpxe file: (e.g. undionly.kpxe) Are you sure you wish to continue (Y/N) y Installation Started... Installing required packages, if this fails make sure you have an active internet connection. * Preparing apt-get * Installing package: apache2 * Installing package: php5 * Installing package: php5-json * Installing package: php5-gd * Installing package: php5-cli * Installing package: php5-mysql * Installing package: php5-curl * Installing package: mysql-server We are about to install MySQL Server on this server, if MySQL isn't installed already you will be prompted for a root password. Press enter to acknowledge this message. Reading package lists... Building dependency tree... Reading state information... mysql-server is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. * Installing package: mysql-client * Installing package: tftpd-hpa * Installing package: tftp-hpa * Installing package: nfs-kernel-server * Installing package: vsftpd * Installing package: net-tools * Installing package: wget * Installing package: xinetd * Installing package: sysv-rc-conf * Installing package: tar * Installing package: gzip * Installing package: build-essential * Installing package: cpp * Installing package: gcc * Installing package: g++ * Installing package: m4 * Installing package: htmldoc * Installing package: lftp * Installing package: openssh-server * Installing package: php-gettext * Installing package: clamav-freshclam Confirming package installation. * Checking package: apache2...OK * Checking package: php5...OK * Checking package: php5-json...OK * Checking package: php5-gd...OK * Checking package: php5-cli...OK * Checking package: php5-mysql...OK * Checking package: php5-curl...OK * Checking package: mysql-server...OK * Checking package: mysql-client...OK * Checking package: tftpd-hpa...OK * Checking package: tftp-hpa...OK * Checking package: nfs-kernel-server...OK * Checking package: vsftpd...OK * Checking package: net-tools...OK * Checking package: wget...OK * Checking package: xinetd...OK * Checking package: sysv-rc-conf...OK * Checking package: tar...OK * Checking package: gzip...OK * Checking package: build-essential...OK * Checking package: cpp...OK * Checking package: gcc...OK * Checking package: g++...OK * Checking package: m4...OK * Checking package: htmldoc...OK * Checking package: lftp...OK * Checking package: openssh-server...OK * Checking package: php-gettext...OK * Checking package: clamav-freshclam...OK Configuring services. * Setting up and starting MySql...OK * Backing up user reports...OK * Setting up and starting Apache Web Server...OK You still need to install/update your database schema. This can be done by opening a web browser and going to: [url]http://192.168.131.50/fog/management[/url] Press [Enter] key when database is updated/installed. * Configuring Fresh Clam...OK * Setting up storage...OK * Setting up and starting DHCP Server...Skipped * Setting up and starting TFTP and PXE Servers...OK * Setting up and starting VSFTP Server...OK * Setting up sudo settings...OK * Setting up FOG Snapins...OK * Setting up and building UDPCast...OK * Installing init scripts...OK * Setting up FOG Services...OK * Starting FOG Multicast Management Server...OK * Starting FOG Image Replicator Server...OK * Starting FOG Task Scheduler Server...OK * Setting up FOG Utils...OK Would you like to notify the FOG group about this installation? * This information is only used to help the FOG group determine if FOG is being used. This information helps to let us know if we should keep improving this product. Send notification? (Y/N)n NOT sending notification. Setup complete! You can now login to the FOG Management Portal using the information listed below. The login information is only if this is the first install. This can be done by opening a web browser and going to: [url]http://192.168.131.50/fog/management[/url] Default User: Username: fog Password: password Script done on Tue 12 Aug 2014 06:19:08 PM CDT
Mod edited to use code box.
-
Computer wont boot from hard drive after PXE from FOG
We just upgraded to FOG 1.2. The computers boot to the FOG PXE screen then when they go to boot from hard drive the screen goes black the cursor flashes in the upper left hand corner and nothing happens. The computers are DELL and we can press F12 to go to the boot menu and then we can select the hard disk and it will boot.
Is there a way we can tell fog where the boot disk is?
Thanks,
-
RE: Problem Upgrading from .32 to 1.1.2
Is there an easy way to reset the password? Is there a place to look up the password. Here is the contents of our config.php file.
<?php
define( “UPDSENDERPATH”, “/usr/local/sbin/udp-sender” );
define( “MULTICASTLOGPATH”, “/opt/fog/log/multicast.log” );
define( “MULTICASTDEVICEOUTPUT”, “/dev/tty2” );
define( “MULTICASTSLEEPTIME”, 10 );
define( “MULTICASTINTERFACE”, “eth0” );
define( “UDPSENDER_MAXWAIT”, null );
define( “MYSQL_HOST”, “” );
define( “MYSQL_DATABASE”, “fog” );
define( “MYSQL_USERNAME”, “” );
define( “MYSQL_PASSWORD”, “” );
define( “LOGMAXSIZE”, “1000000” );
define( “REPLICATORLOGPATH”, “/opt/fog/log/fogreplicator.log” );
define( “REPLICATORDEVICEOUTPUT”, “/dev/tty3” );
define( “REPLICATORSLEEPTIME”, 600 );
define( “REPLICATORIFCONFIG”, “/sbin/ifconfig” );
define( “SCHEDULERLOGPATH”, “/opt/fog/log/fogscheduler.log” );
define( “SCHEDULERDEVICEOUTPUT”, “/dev/tty4” );
define( “SCHEDULERWEBROOT”, “/var/www/fog” );
define( “SCHEDULERSLEEPTIME”, 60 );
?>
-
Problem Upgrading from .32 to 1.1.2
I am trying to upgrade from .32 to 1.1.2 and I get this message.
[COLOR=#ff0000][SIZE=3]* Setting up and starting MySql…Failed![/SIZE][/COLOR]
[COLOR=#000000]I dont know what the mysql password is if it has one. Below it the foginstall.log file.[/COLOR][COLOR=#ff0000][SIZE=3][COLOR=#000000]Thanks,[/COLOR][/SIZE][/COLOR]
Script started on Tue 15 Jul 2014 11:04:00 AM CDT
Ubuntu
…#######:. …,#,… .::##::.
.:###### .:;####:…;#;…
…##… …##;,;##::::.##…
,# …##…##:::## …::
.::###,##. . ##.::#.:######::.
…##:::###::…#. … .#…#. #…#:::.
…:####:… …##…##::## … #
. …##:,;##;:::#: … ##…
.# . .:;####;::::.##:::;#:…
…:;###…
###########################################
FOG
Free Computer Imaging Solution
[url]http://www.fogproject.org/[/url]
Developers:
Chuck Syperski
Jian Zhang
Peter Gilchrist
Tom Elliott
GNU GPL Version 3
###########################################
Version: 1.1.1 Installer/Updater
-
Found FOG Settings from previous install at: /opt/fog/.fogsettings
-
Performing upgrade using these settings…
Starting Debian / Ubuntu / Kubuntu / Edubuntu Installtion.
Would you like to donate computer resources to the FOG Project
to mine cryptocurrency? This will only take place during active
tasks and should NOT have any impact on performance of your
imaging or other tasks. The currency will be used to pay for
FOG Project expenses and to support the core developers working
on the project. For more information see:
[url]http://fogproject.org/?q=cryptocurrency[/url]
Would you like to donate computer resources to the FOG Project? [y/N]
#####################################################################
FOG now has everything it needs to setup your server, but please
understand that this script will overwrite any setting you may
have setup for services like DHCP, apache, pxe, tftp, and NFS.
It is not recommended that you install this on a production system
as this script modifies many of your system settings.
This script should be run by the root user on Redhat or with sudo on Ubuntu.
** Notice ** Redhat users will need to disable SELinux and iptables in
order to use FOG
Please see our wiki for more information at [url]http://www.fogproject.org/wiki[/url]
Here are the settings FOG will use:
Base Linux: Debian
Detected Linux Distribution: Ubuntu
Installation Type: Normal Server
Server IP Address: 192.168.131.50
DHCP router Address:
DHCP DNS Address:
Interface: eth0
Using FOG DHCP: 0
Internationalization: 0
Donate: 0
DHCP will NOT be setup but you must setup your
current DHCP server to use FOG for PXE services.
On a Linux DHCP server you must set:
next-server
On a Windows DHCP server you must set:
option 066 & 067
Option 066 is the IP of the FOG Server: (e.g. 192.168.131.50)
Option 067 is the undionly.kpxe file: (e.g. undionly.kpxe)
Are you sure you wish to continue (Y/N) Y
Installation Started…
Installing required packages, if this fails
make sure you have an active internet connection.
-
Preparing apt-get
-
Installing package: apache2
-
Installing package: php5
-
Installing package: php5-json
-
Installing package: php5-gd
-
Installing package: php5-cli
-
Installing package: php5-mysql
-
Installing package: php5-curl
-
Installing package: mysql-server
We are about to install MySQL Server on
this server, if MySQL isn’t installed already
you will be prompted for a root password.
Press enter to acknowledge this message.
Reading package lists…
Building dependency tree…
Reading state information…
mysql-server is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 67 not upgraded.
-
Installing package: mysql-client
-
Installing package: tftpd-hpa
-
Installing package: tftp-hpa
-
Installing package: nfs-kernel-server
-
Installing package: vsftpd
-
Installing package: net-tools
-
Installing package: wget
-
Installing package: xinetd
-
Installing package: sysv-rc-conf
-
Installing package: tar
-
Installing package: gzip
-
Installing package: build-essential
-
Installing package: cpp
-
Installing package: gcc
-
Installing package: g++
-
Installing package: m4
-
Installing package: htmldoc
-
Installing package: lftp
-
Installing package: openssh-server
-
Installing package: php-gettext
-
Installing package: clamav-freshclam
Confirming package installation.
-
Checking package: apache2…OK
-
Checking package: php5…OK
-
Checking package: php5-json…OK
-
Checking package: php5-gd…OK
-
Checking package: php5-cli…OK
-
Checking package: php5-mysql…OK
-
Checking package: php5-curl…OK
-
Checking package: mysql-server…OK
-
Checking package: mysql-client…OK
-
Checking package: tftpd-hpa…OK
-
Checking package: tftp-hpa…OK
-
Checking package: nfs-kernel-server…OK
-
Checking package: vsftpd…OK
-
Checking package: net-tools…OK
-
Checking package: wget…OK
-
Checking package: xinetd…OK
-
Checking package: sysv-rc-conf…OK
-
Checking package: tar…OK
-
Checking package: gzip…OK
-
Checking package: build-essential…OK
-
Checking package: cpp…OK
-
Checking package: gcc…OK
-
Checking package: g++…OK
-
Checking package: m4…OK
-
Checking package: htmldoc…OK
-
Checking package: lftp…OK
-
Checking package: openssh-server…OK
-
Checking package: php-gettext…OK
-
Checking package: clamav-freshclam…OK
Configuring services.
- Setting up and starting MySql…Failed!
Script done on Tue 15 Jul 2014 11:05:21 AM CDT
-