Topics created by sonic136

Solved. It was the init.xz file that was customised for our environment, The default was applied and seems to be working now.

@sonic136 All I can say is that we’ve seen early versions of uefi bios have poor snp uefi drivers. But if this mobo was created in the last 5-6 years it shouldn’t have an issue with snp because uefi firmware has matured quite a bit. Strange, but we’ve seen it happen on certain models.

turns out that the image had to be set to “Multiple partition image - single disk (not resizeable)”

@Sebastian-Roth for future reference, I will be sure to mention version numbers

Everything else worked including the .xml file.

Thank you for the assistance!! 🙂

Let me give a feedback to this issue, as I faced it recently. In my case, the culprit was faulting parameters in Microsoft DHCP.
Captura de tela de 2024-05-03 12-15-42.png
It was faulting “MSFT Quarantine” User Class and PXE Vendor Class is not properly configured (It was typed “PXEclient:Arch:00007” instead of “PXEClient:Arch:00007”).
Captura de tela de 2024-05-03 12-15-26.png
After doing this corrections, PXE got successfully redirected Boot instructions to FOG Server.

@sebastian-roth Thank you. Will look into it!

Thanks All!..

Solution has worked perfectly!

@george1421 Fog is a waaaaaaayyyyyyyyyyy better fit than Zenworks at the moment, it images 4x faster and its more stable. Fog is actually working very well without these refinements that I want to do 🙂

@Sebastian-Roth thanks. i’ll try this and get back to you with an image of the details if it fails