Posts made by Sivasubramaniam.T

Thanks a lot for your support TOM.

I will test and let you know.

Thanks
Siva

Hi Team,

I am trying to configure Single Fog server and multiple TFTP servers.

Am following the below link as a guide to configure but this guide is for Fog 0.32 version.
[url]http://www.fogproject.org/wiki/index.php/Multiple_TFTP_servers[/url]

I am using Fog 1.2.0 in Ubuntu 12.04 32bit

I have few doubt’s while configuring multiple TFTP service in FOG 1.2.0

[B]1.[/B] Can someone please tell the use of /tftpboot/pxelinux.cfg and why this is been shared with storage node with tftp service.

[B]2.[/B] I couldn’t able to find this /tftpboot/pxelinux.cfg in Fog 1.2.0 what to in such case.

Can some one one please guide me.

Thanks&Regards,
Siva

Hi Mawaai,

Have you got any idea ? Even am looking for a solution for the same.

Hi,

I was helping my friend to setting up a FOG server. After configuration I found fog login and fog configuration is taking much time to open.

Fog Version 1.2.0 in Ubuntu 12.04 - runs on i7 Desktop with 8 GB RAM

Please help.

Hi,

I am also facing same issue. Please follow this thread [url]http://fogproject.org/forum/threads/pxe-issues.11219/page-2[/url]

Configuring DNSMASQ helped Phantox to fix this issue. I hope this will help us. I will try and let you know tomorrow.

Thanks a lot for your help Phantox. I will try tomorrow and let you know.

I have bit doubt in (dhcp-range=[B]10.0.0.10[/B],proxy) part. Can I give DHCP server IP B[/B] in place of [B]10.0.0.10[/B] as our ip range is in 172.17.x.x

Once again thanks for you help.

Hi Phantox,

Can you please guide me to fix this issue. I have same issue. I have Fog 1.2.0 running in Ubuntu 12.04. I am using Windows Server for DHCP service.

Thanks in advance.

I am also facing the same issue. Please help. (Fog : 1.2.0 in Ubuntu 12.04)

Hi Junk,

No, I have used the default undionly.kpxe

Hi,

I am using Fog Version: 1.2.0 Ubuntu: 12.04 LTS (Fresh Install )

I am getting the the below error during pxe boot.

[ iPXE initialising devices…ok
Configuring (net0 xxx)… ok
[B]Could not start download: Operation not supported ([url]http://ipxe.org/3c092003[/url])[/B]
[B]Selected boot device failed. Press any key to reboot the system. ][/B]

But sometimes I can Register the host, Upload and download the image without any issue.

Please help. Image attached for reference.

Thanks&Regards,
Siva

[url=“/_imported_xf_attachments/1/1198_Ipxe.png?:”]Ipxe.png[/url]

Congrats Fog Team. Thanks for your great effort.

Hi,

I am using Fog 1.1.1 on Ubuntu 13.04 (64bit)

First time I have done full host registration and downloaded the image properly.

After registration and imaging, Second time when I try to quick image it get stuck at [url]http://x.x.x.x/fog/service/ipxe.boot.php[/url]…

I have tried changing the boot option to Sanboot/grub/exit style.

I have tried with different kernels.

I have tried with multiple systems. It happens the same with all. Image attached for reference.

Thanks&Regards,
Siva

[url=“/_imported_xf_attachments/1/1020_IMG_20140619_181437917.jpg?:”]IMG_20140619_181437917.jpg[/url]

Ok, No Issues bro. I will try with different possible ways to fix this and let you know. Thanks for your support.

Hi,

Can you please tell me the change in settings that should be made on the switches for FOG.

Regards,
Siva

Thank you once again for your great support.

Please let me know what are the things has to be done on the Juniper switches by following the link you have shared.

Regards,
Siva

Hi Tom,

Its all Juniper Switch.

Hi Tom,

Here spanning tree is must for some network requirement it seems and I don’t have access for the core switch to test it. I am help less now.

Yeah I am getting IP from DHCP Server.

Thanks&Regards,
Siva

Hi Tom,

Thanks for the prompt response.

The error is - "Could not boot : connection timed out ([url]http://ipxe.org/4c0a6035[/url]) "
(This error come after selecting full host registration - It loads bzImage and this error comes and exits)

Yes spanning tree is enable in the switch.

Thanks&Regards,
Siva

Hi ,

I have freshly installed 1.1.1 in 13.04(64 bit).

1. While loading ipxe most of the time it tells “download : operation not supported” or it just exits without loading FOG menu without any message. We need to reboot twice or thrice to load Fog menu.

2. When I try to perform full host registration, It exits and get into the OS. We need to try twice or thrice perform full host register.

I have tried with different kernels and FOG boot settings. I searched wiki for four days I couldn’t able to find the issue. Firewall is disabled. It loads the bzimage - ok and init.xz -ok and in the next step is where the problem is.
I have installed FOG 1.1.1 multiple times but same issue.

Please help. Thanks in advance.

Great job Tom and Team. My hearty Thanks.
I am going to update my FOG today.