Thanks a lot for your support TOM.
I will test and let you know.
Thanks
Siva
Thanks a lot for your support TOM.
I will test and let you know.
Thanks
Siva
Hi Team,
I am trying to configure Single Fog server and multiple TFTP servers.
Am following the below link as a guide to configure but this guide is for Fog 0.32 version.
[url]http://www.fogproject.org/wiki/index.php/Multiple_TFTP_servers[/url]
I am using Fog 1.2.0 in Ubuntu 12.04 32bit
I have few doubt’s while configuring multiple TFTP service in FOG 1.2.0
[B]1.[/B] Can someone please tell the use of /tftpboot/pxelinux.cfg and why this is been shared with storage node with tftp service.
[B]2.[/B] I couldn’t able to find this /tftpboot/pxelinux.cfg in Fog 1.2.0 what to in such case.
Can some one one please guide me.
Thanks&Regards,
Siva
Hi Mawaai,
Have you got any idea ? Even am looking for a solution for the same.
Hi,
I was helping my friend to setting up a FOG server. After configuration I found fog login and fog configuration is taking much time to open.
Fog Version 1.2.0 in Ubuntu 12.04 - runs on i7 Desktop with 8 GB RAM
Please help.
Hi,
I am also facing same issue. Please follow this thread [url]http://fogproject.org/forum/threads/pxe-issues.11219/page-2[/url]
Configuring DNSMASQ helped Phantox to fix this issue. I hope this will help us. I will try and let you know tomorrow.
Thanks a lot for your help Phantox. I will try tomorrow and let you know.
I have bit doubt in (dhcp-range=[B]10.0.0.10[/B],proxy) part. Can I give DHCP server IP B[/B] in place of [B]10.0.0.10[/B] as our ip range is in 172.17.x.x
Once again thanks for you help.
Hi Phantox,
Can you please guide me to fix this issue. I have same issue. I have Fog 1.2.0 running in Ubuntu 12.04. I am using Windows Server for DHCP service.
Thanks in advance.
I am also facing the same issue. Please help. (Fog : 1.2.0 in Ubuntu 12.04)
Hi Junk,
No, I have used the default undionly.kpxe
Hi,
I am using Fog Version: 1.2.0 Ubuntu: 12.04 LTS (Fresh Install )
I am getting the the below error during pxe boot.
[ iPXE initialising devices…ok
Configuring (net0 xxx)… ok
[B]Could not start download: Operation not supported ([url]http://ipxe.org/3c092003[/url])[/B]
[B]Selected boot device failed. Press any key to reboot the system. ][/B]
But sometimes I can Register the host, Upload and download the image without any issue.
Please help. Image attached for reference.
Thanks&Regards,
Siva
[url=“/_imported_xf_attachments/1/1198_Ipxe.png?:”]Ipxe.png[/url]