Will do thanks

The systems that are known to be good are slow as well using 3.12 kernel.

I will check this tomorrow. Thank You

The switching appears to be fine. If I revert back to 3.8 kernel I can image any other machine with excellent speeds using the same cable/switch. I have never imaged this lenovo pc. It is a new pc I am testing before I purchase them. I want to be sure I can use them with fog before I buy a bunch of them. My M73 Lenovos image perfectly using the same switch/cable to the server. I can put a 40 gb image down in about 17 mins.

Before we were getting very good speeds. We could push this same image to a pc in about 17mins. Th efog server is a quad core beefed up VM

Attache dis the imaging screen shot. [ATTACH=full]431[/ATTACH]

[url=“/_imported_xf_attachments/0/431_photo (3).JPG?:”]photo (3).JPG[/url]

Well, I take back my last post it is not locked up. It is just running super slow. It has been sitting on the imaging screen now for a half hour and just moved to 1 percent.

Well the network driver worked but now once the imaging process begins it hangs, it gets through the inital loading and then it shows waiting for disks to settle, then goes to the imaging screen and something completes very quickly (I believe this is that small win 7 partition that it creates quickly) Then begins to try to load the image. Mine gets to 0% then locks up it copied 97.61 mib before it locked.

The new I got this message. [ATTACH=full]429[/ATTACH]

[url=“/_imported_xf_attachments/0/429_photo (2).JPG?:”]photo (2).JPG[/url]

That link is broken. Can you please verify the link. Thanks

The new Kernel will not load at all. Here is a pic of what it says. On this kernel I cant even boot to the client system information screens. Thanks again for taking the time to review this.[ATTACH=full]428[/ATTACH]

[url=“/_imported_xf_attachments/0/428_photo (1).JPG?:”]photo (1).JPG[/url]

your link is broken, I have the download but it should be [url]https://mastacontrola.com/fogboot/kernel/bzImageAllDevice[/url]

Thanks I will try it

Thank You

I am running cat 5e cable to a mix of hp 2848 gb procurve switches and cisco 100mb cisco 3500 switches. The pc is a
[B][SIZE=6][COLOR=#4d4e53][FONT=Prelo-Bold][SIZE=24px]Lenovo ThinkCentre M83 10AM - Core i3 4130 3.4 GHz[/SIZE][/FONT][/COLOR][/SIZE][/B]

My current pc’s that work with fog now are Lenovo M75’s

Is this what you are looking for

I was using the one you gave in the download above. 3.11.1 I believe is what it was.

How would I go about getting this nic card in the kernel?
[B][SIZE=6][COLOR=#4d4e53][FONT=Prelo-Bold][SIZE=24px]Lenovo ThinkCentre M83 10AM - Core i3 4130 3.4 GHz[/SIZE][/FONT][/COLOR][/SIZE][/B]

There is nothing in my log file from this new Lenovo pc. It gets a ip on initial boot. But then once the kernel load the network fails. See attached image of the fog pc info menu. [ATTACH=full]423[/ATTACH]

[url=“/_imported_xf_attachments/0/423_photo.JPG?:”]photo.JPG[/url]

Let me explain a little better where I am at. I copied your kernel from the link you provided above. When I tftp boot the machine it gets an ip address and the fog menu appears. When I select a quick register from the list it loads the kernel and I see your fog display and a couple peoples name that it is created by, then it continues on and then gets to a point where it says attempting to register host. This is where it hangs at a flashing cursor. I will send the log in the morning. Thank You for the help

Here is what I am trying to register and image.
[SIZE=6][B][COLOR=#4d4e53][FONT=Prelo-Bold][SIZE=24px]Lenovo ThinkCentre M83 10AM - Core i3 4130 3.4 GHz[/SIZE][/FONT][/COLOR][/B][/SIZE]

0.32
I am trying to get a Lenovo MT-M-10am to register up so I can image.