Posts made by rynod

Good day all
I have two Fujutsu laptops (win8 64bit) exactly the same spec. ( and Two fog servers)

Laptop a Does a fog backup with no problems at all.
Laptop be Registers to the fog server but as soon as I run an Upload It starts to run then gives the following error

unable to move
[SIZE=6][B]/images/dev/macaddress to /images/name-of-image[/B][/SIZE]

The same error appears on both of my fog servers.
The image folder has full read and write perms.
If done a full Check disk on the laptops HDD…
Please can someone give me an Idea what to try next

HI
do you by any chance have more then one DHCP server running on you network. ?
If so try disableing the other DHCP servers and deploy again ?

hi guy check if there isn’t a second dhcp server on your net work

Hi all If changed the NFS and now I’m having the following problem.
error
unable to move
/images_d2/dev/023652 to /images_d2/themba
Any advice ?

HI guys
The only Way to add the second hdd is to change the NFS settings.
If you guys can ask the developers to build in an option to handle two HDD on a signal host and give the users the option to choose wish drive to save to it will be a lot more user friendly.

Thanks Guys for your help and Reply’s

Hi
Thanks all the reply
Ok what I did so far is
I’ve created a second Storage group (Storage 2) and also added a second node (Basilly copyed everything from the Default node exsept (master tik) and I’ve changed the path to point to /image_d2 (mounted to disk2).
But Fog doesn’t see the second drive at all
Here is sume screen dumps

Ps Where do I change the NFS exsport ?

[url=“/_imported_xf_attachments/0/337_Fog.pdf?:”]Fog.pdf[/url]

Hi Does any one now how to ad a second hdd to a fog server and the choose between the two of them where the users images are stored.

I have two drives one mounted as /images and a second one mounted ad /Images_d2.

I want to have the option of choosing on wich drive the image is saved.

Thank you for all your help I found the awnser in my debug menu
I had a second DHCP server (router) giving out address and for sum reson it over wrote the fog server.
When I turned of the router the d2560 Registers and backup as well
Thanks again for all your help.

JUst one more question when I greate a task for cloning a drive where does it greate a log of all the images that was uploaded
not just the deployed ones ?

hi there isn’t any files with that description only default

where can I run a Fog compatibility test

sharp@ubuntubakup:/tftpboot/pxelinux.cfg$ ls -l
total 4
-rw-r–r-- 1 fog root 2171 May 17 17:16 default
sharp@ubuntubakup:/tftpboot/pxelinux.cfg$

Hello here is sum more info
the Main Board is a D3041 (model number)
in the boot options is says PCI BEV: Realtek PXE B03 D00 for the netwwork boot device

And also here are some pics of what I’m seeing The first screen loads with all the errors and then the second one.

Thank in advance for all your help
[ATTACH]317[/ATTACH]

[ATTACH]318[/ATTACH]

[ATTACH]319[/ATTACH]

[url=“/_imported_xf_attachments/0/317_first screen (1)-800.jpg?:”]first screen (1)-800.jpg[/url][url=“/_imported_xf_attachments/0/318_first screen (2)-800.jpg?:”]first screen (2)-800.jpg[/url][url=“/_imported_xf_attachments/0/319_second screen-800.jpg?:”]second screen-800.jpg[/url]

Hi just an update under the /opt/fog/log
I get this error
[05-17-13 12:25:12 pm] | [05-17-13 12:25:12 pm] Failed to connect to database server, will try again in next iteration.
don’t know if this may have something to do with my problem?

That is the thing these models in question (p2560) non of them registers with the fog server all of them gives the excact same error. I’ve tryed to view the log c:/fog.log but there isn’t one at all. I’ll have a look on the server to see if there is an error log on the ubuntu side.
The con figurations on alll the mashinece are exsactly the same. I’m not sure how to get in to debug mode
if I click on the the host /basic task/Advance/debug It says job started but when I restart the PC into pxe It hangs again with attempting to register host …

The other fujitsus (not P2560) works fine no problems ( they also give an error Bios not suported but move past that and registers

Hi I’m new to FOG and have a problem with some of my Pc on my network the model is Fujitsu-Siemans Esprimo P2560 Bios version 6.00 R1.02.3041.A1
I’ve update Fogs Kernel to version form 2.6 to 3.88 but still these pc about 8 of them refuses to Register to the host or even upload an image to the fog server.

the server is Ubuntu 12.04 the client Os is win 7
When I try to register the Host It just hangs at Attempting to register host …
Is there something I’m missing or do I need a special kernel for them to load.
how can I get a log or a report of what is happening ?

thanks in advance

Hi I’m new to FOG and have a problem with some of my Pc on my network the model is Fujitsu-Siemans Esprimo P2560 Bios version 6.00 R1.02.3041.A1
I’ve update Fogs Kernel to version form 2.6 to 3.88 but still these pc about 8 of them refuses to Register to the host or even upload an image to the fog server.

the server is Ubuntu 12.04 the client Os is win 7
When I try to register the Host It just hangs at Attempting to register host …
Is there something I’m missing or do I need a special kernel for them to load.
how can I get a log or a report of what is happening ?

thanks in advance