@professorb24 I run the same setup but because they are VLANs the whole point is that they are different subnets Therefore best way is to have 2x separate DHCP servers - I have one on 17.x and one on 15,x
You really have 3 options
@Tom-Elliott @george1421 I’ve done it, Winscp’d the files from my PC build lab FOG and added them to the directory on the SRV build lab FOG… PXE now working!!! woop
@george1421 Hi fella, long time no “see” How can I check the TFTP boot directory? - If it’s blank, how do I populate? i have this in tftpd-hpa? Is this where you mean?
fogadmin@tie-svrbr-fog:~$ cat /etc/default/tftpd-hpa
TFTP_USERNAME=“tftp”
TFTP_DIRECTORY=“/srv/tftp”
TFTP_ADDRESS=“:69”
TFTP_OPTIONS=“–secure”
FOG is really annoying me now - I have DHCP options 66 configured for my FOGServer - 192.168.17.250 and i’ve tried option 67 with undionly,kpxe undionlykkpxe and ipxe.efi but still keep getting the tftp file not found
FOG Verson 1.5.10,
Ubuntu 22.04.4LTS
I dont really want to copy the VHD from my PC lab to my server lab - Would rather have a fresh slate in this room - What am I missing please!!!
Is secure boot on or off? If it’s windows 11, i’ve had problems where it hates legacy and will only boot in secure boot due to UEFI needed
It’s a possibly stupid question but what’s the latest supported Ubuntu version for FOG please? I’m currently running 20.04.6LTS for our PC build room but i’m wanting to build a second FOG server for our Server build room. Think the latest is 24.04.3 LTS but dont want to go above a supported version that FOG wants
Cheers in advance
Roger
I’m having a space issue with my Fog server. I think when i’m deleting images, they are only deleting from the gui and not the box itself? Is there a way to “purge” any remnants?
Output from putty:
root@tie-fogdeploy-01:~# df
Filesystem 1K-blocks Used Available Use% Mounted on
udev 5941224 0 5941224 0% /dev
tmpfs 1197468 1104 1196364 1% /run
/dev/mapper/ubuntu–vg-ubuntu–lv 513396624 326710568 164713068 67% /
tmpfs 5987336 0 5987336 0% /dev/shm
tmpfs 5120 0 5120 0% /run/lock
tmpfs 5987336 0 5987336 0% /sys/fs/cgroup
/dev/loop1 64896 64896 0 100% /snap/core20/1879
/dev/loop0 64896 64896 0 100% /snap/core20/1852
/dev/loop3 94080 94080 0 100% /snap/lxd/24061
/dev/loop2 94080 94080 0 100% /snap/lxd/23991
/dev/loop4 54528 54528 0 100% /snap/snapd/18933
/dev/loop5 54528 54528 0 100% /snap/snapd/19122
/dev/sda2 1992552 213032 1658280 12% /boot
tmpfs 1197464 0 1197464 0% /run/user/0
Dashboard shows
Image list:
Total size of the images is 105.29GB?
@Sebastian-Roth Thanks friend 
Legendary!
@Sebastian-Roth root@tie-fogdeploy-01:~# df -h
Filesystem Size Used Avail Use% Mounted on
udev 5.7G 0 5.7G 0% /dev
tmpfs 1.2G 1.1M 1.2G 1% /run
/dev/mapper/ubuntu–vg-ubuntu–lv 490G 86G 384G 19% /
tmpfs 5.8G 0 5.8G 0% /dev/shm
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 5.8G 0 5.8G 0% /sys/fs/cgroup
/dev/loop0 92M 92M 0 100% /snap/lxd/23991
/dev/loop4 50M 50M 0 100% /snap/snapd/17950
/dev/loop2 92M 92M 0 100% /snap/lxd/24061
/dev/loop3 64M 64M 0 100% /snap/core20/1778
/dev/loop1 64M 64M 0 100% /snap/core20/1822
/dev/loop5 50M 50M 0 100% /snap/snapd/18357
/dev/sda2 2.0G 207M 1.6G 12% /boot
tmpfs 1.2G 0 1.2G 0% /run/user/0
root@tie-fogdeploy-01:~#
i’m guessing /dev/mapper/ubuntu–vg-ubuntu–lv 490G 86G 384G 19% / means its worked?
@Sebastian-Roth Thanks my friend, snapshot taken in hyper-v and command run… Stupid Q now. How do I check if it’s worked 
@Sebastian-Roth further info print i’ve got if this makes more sense:
root@tie-fogdeploy-01:~# sudo parted /dev/sda unit MiB print
Model: Msft Virtual Disk (scsi)
Disk /dev/sda: 512000MiB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 1.00MiB 2.00MiB 1.00MiB bios_grub
2 2.00MiB 2050MiB 2048MiB ext4
3 2050MiB 511999MiB 509949MiB
If the system isnt running, surely I wouldnt be able to do anything, so it needs to be online?
@Sebastian-Roth So obviously as a Linux noob, I know very little… I’m purely (I know, insert puke emoji here) a Windows Sysadmin. If I understand it correctly the way i’ve got it setup is like having a single big C:\ and all i’m wanting to do is get the entire fog server to see it all rather than just a partition of it… If I follow that command
“lvextend --extents +100%FREE ubuntu-vg/ubuntu-lv --resizefs”
Will it do that so that the full 500gb would be visible and the images stored remain intact?
@lukebarone response: root@tie-fogdeploy-01:~# lvextend -L +398g ubuntu-vg/ubuntu-lv --resizefs
Insufficient free space: 101888 extents needed, but only 101887 available
root@tie-fogdeploy-01:~#
In which case based on the output here:
root@tie-fogdeploy-01:~# pvs
PV VG Fmt Attr PSize PFree
/dev/sda3 ubuntu-vg lvm2 a-- <498.00g <398.00g
root@tie-fogdeploy-01:~# lvs
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
ubuntu-lv ubuntu-vg -wi-ao---- 100.00g
root@tie-fogdeploy-01:~# vgs
VG #PV #LV #SN Attr VSize VFree
ubuntu-vg 1 1 0 wz–n- <498.00g <398.00g
root@tie-fogdeploy-01:~# lvextend -L +398g ubuntu-lv --resizefs
Please specify a logical volume path.
Run `lvextend --help’ for more information.
root@tie-fogdeploy-01:~#
Would it be lvextend -L +398g ubuntu-vg --resizefs ?
@lukebarone said in Ubuntu Help - Boot Problem #N00b:
lvextend -L +398g ubuntu-lv --resizefs
to confirm, this will mean I can actually use the box to it’s full 500gb drive allocation?
@Sebastian-Roth said in Ubuntu Help - Boot Problem #N00b:
lvs
Output is as follows:
root@tie-fogdeploy-01:~# pvs
PV VG Fmt Attr PSize PFree
/dev/sda3 ubuntu-vg lvm2 a-- <498.00g <398.00g
root@tie-fogdeploy-01:~# lvs
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
ubuntu-lv ubuntu-vg -wi-ao---- 100.00g
root@tie-fogdeploy-01:~# vgs
VG #PV #LV #SN Attr VSize VFree
ubuntu-vg 1 1 0 wz--n- <498.00g <398.00g
root@tie-fogdeploy-01:~#
@Sebastian-Roth said in Ubuntu Help - Boot Problem #N00b:
df -h
Okay, removed the offending one using rm -rf /images/dev/c8d9d2d4c8ac df -h shows:
root@tie-fogdeploy-01:~# df -h
Filesystem Size Used Avail Use% Mounted on
udev 5.7G 0 5.7G 0% /dev
tmpfs 1.2G 112M 1.1G 10% /run
/dev/mapper/ubuntu--vg-ubuntu--lv 98G 86G 7.8G 92% /
tmpfs 5.8G 0 5.8G 0% /dev/shm
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 5.8G 0 5.8G 0% /sys/fs/cgroup
/dev/loop0 92M 92M 0 100% /snap/lxd/23991
/dev/loop1 64M 64M 0 100% /snap/core20/1822
/dev/loop2 92M 92M 0 100% /snap/lxd/24061
/dev/loop3 50M 50M 0 100% /snap/snapd/17950
/dev/loop5 50M 50M 0 100% /snap/snapd/18357
/dev/loop4 64M 64M 0 100% /snap/core20/1778
/dev/sda2 2.0G 207M 1.6G 12% /boot
root@tie-fogdeploy-01:~#
Rebooted VM. df -h shows
root@tie-fogdeploy-01:~# df -h
Filesystem Size Used Avail Use% Mounted on
udev 5.7G 0 5.7G 0% /dev
tmpfs 1.2G 1.1M 1.2G 1% /run
/dev/mapper/ubuntu--vg-ubuntu--lv 98G 86G 7.8G 92% /
tmpfs 5.8G 0 5.8G 0% /dev/shm
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 5.8G 0 5.8G 0% /sys/fs/cgroup
/dev/loop1 64M 64M 0 100% /snap/core20/1778
/dev/loop0 64M 64M 0 100% /snap/core20/1822
/dev/loop2 50M 50M 0 100% /snap/snapd/18357
/dev/loop5 92M 92M 0 100% /snap/lxd/24061
/dev/loop3 50M 50M 0 100% /snap/snapd/17950
/dev/loop4 92M 92M 0 100% /snap/lxd/23991
/dev/sda2 2.0G 207M 1.6G 12% /boot
tmpfs 1.2G 0 1.2G 0% /run/user/0
root@tie-fogdeploy-01:~#
It’s a 500gb VHDX though, surely this shouldnt be full?