Furthermore, I’m trying to get this going as a portable server I can set down anywhere, image some machines, and go to next site. I assume this is possible with FOG, but please let me know if you think I’m just making more work for myself to no discernible advantage.

awesome… 12.04 it is then… is there special sauce for FOG in the server version versus the desktop version, or just fewer packages installed by default on desktop?

it is Ubuntu 14.04. Didn’t see V.1.0.0 on SF… Is there a different download site?

[quote=“Jaymes Driver, post: 26737, member: 3582”]What happens if you try to install the up-to-date version of FOG 1.0.0?

Also please let us know which version and Distribution of linus you are using, from the information provided I have deduced that it is a Debian base, but that is all I can determine.[/quote]

…#######:. …,#,… .::##::.
.:###### .:;####:…;#;…
…##… …##;,;##::::.##…
,# …##…##:::## …::
## .::###,##. . ##.::#.:######::.
…##:::###::…#. … .#…#. #…#:::.
…:####:… …##…##::## … #
# . …##:,;##;:::#: … ##…
.# . .:;####;::::.##:::;#:…
# …:;###…

###########################################

FOG

Free Computer Imaging Solution

Created by:

SyperiorSoft

[url]http://www.SyperiorSoft.com[/url]

Developers:

Chuck Syperski

Jian Zhang

GNU GPL Version 3

###########################################

Version: 0.32 Installer/Updater

What version of Linux would you like to run the installtion for?

      1) Redhat Based Linux (Fedora, CentOS)
      2) Ubuntu Based Linux (Kubuntu, Edubuntu)

Choice: [2]

Starting Ubuntu Installtion.

FOG Server installation modes:
* Normal Server: (Choice N)
This is the typical installation type and
will install all FOG components for you on this
machine. Pick this option if you are unsure what to pick.

  * Storage Node: (Choice S)
      This install mode will only install the software required
      to make this server act as a node in a storage group

More information:
[url]http://www.fogproject.org/wiki/index.php?title=InstallationModes[/url]

What type of installation would you like to do? [N]

What is the IP address to be used by this FOG Server? [127.0.0.1]10.128.43.141

Would you like to setup a router address for the DHCP server? [Y/n]
What is the IP address to be used for the router on the DHCP server? []10.128.43.141

Would you like to setup a DNS address for the DHCP server and client boot image? [Y/n]
What is the IP address to be used for DNS on the DHCP server and client boot image? [] 10.128.43.141

Would you like to change the default network interface from eth0?
If you are not sure, select No. [y/N]

Would you like to use the FOG server for dhcp service? [Y/n]

This version of FOG has internationalization support, would
you like to install the additional language packs? [Y/n] n

#####################################################################

FOG now has everything it needs to setup your server, but please
understand that this script will overwrite any setting you may
have setup for services like DHCP, apache, pxe, tftp, and NFS.

It is not recommended that you install this on a production system
as this script modifies many of your system settings.

This script should be run by the root user on Fedora, or with sudo on Ubuntu.

Here are the settings FOG will use:
Distro: Ubuntu
Installation Type: Normal Server
Server IP Address: 10.128.43.141
DHCP router Address: 10.128.43.141
DHCP DNS Address: 10.128.43.141
Interface: eth0
Using FOG DHCP: 1
Internationalization: 0

Are you sure you wish to continue (Y/N) y

Installation Started…

Installing required packages, if this fails
make sure you have an active internet connection.

• Preparing apt-get

• Installing package: apache2

• Installing package: php5

• Installing package: php5-gd

• Installing package: php5-cli

• Installing package: php5-mysql

• Installing package: php5-curl

• Installing package: mysql-server

  We are about to install MySQL Server on
  this server, if MySQL isn’t installed already
  you will be prompted for a root password. If
  you don’t leave it blank you will need to change
  it in the config.php file located at:

  /var/www/fog/commons/config.php

  Press enter to acknowledge this message.

Reading package lists…
Building dependency tree…
Reading state information…
mysql-server is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 23 not upgraded.

• Installing package: mysql-client
• Installing package: isc-dhcp-server
• Installing package: tftpd-hpa
• Installing package: tftp-hpa
• Installing package: nfs-kernel-server
• Installing package: vsftpd
• Installing package: net-tools
• Installing package: wget
• Installing package: xinetd
• Installing package: sysv-rc-conf
• Installing package: tar
• Installing package: gzip
• Installing package: build-essential
• Installing package: cpp
• Installing package: gcc
• Installing package: g++
• Installing package: m4
• Installing package: htmldoc
• Installing package: perl
• Installing package: libcrypt-passwdmd5-perl
• Installing package: lftp
• Installing package: openssh-server
• Installing package: php-gettext
• Installing package: clamav-freshclam

Confirming package installation.

• Checking package: apache2…OK
• Checking package: php5…OK
• Checking package: php5-gd…OK
• Checking package: php5-cli…OK
• Checking package: php5-mysql…OK
• Checking package: php5-curl…OK
• Checking package: mysql-server…OK
• Checking package: mysql-client…OK
• Checking package: isc-dhcp-server…OK
• Checking package: tftpd-hpa…OK
• Checking package: tftp-hpa…OK
• Checking package: nfs-kernel-server…OK
• Checking package: vsftpd…OK
• Checking package: net-tools…OK
• Checking package: wget…OK
• Checking package: xinetd…OK
• Checking package: sysv-rc-conf…OK
• Checking package: tar…OK
• Checking package: gzip…OK
• Checking package: build-essential…OK
• Checking package: cpp…OK
• Checking package: gcc…OK
• Checking package: g++…OK
• Checking package: m4…OK
• Checking package: htmldoc…OK
• Checking package: perl…OK
• Checking package: libcrypt-passwdmd5-perl…OK
• Checking package: lftp…OK
• Checking package: openssh-server…OK
• Checking package: php-gettext…OK
• Checking package: clamav-freshclam…OK

Configuring services.

• Setting up fog user…Exists
• Setting up and starting MySql…OK
• Backing up user reports…OK
• Setting up and starting Apache Web Server…OK
• Restoring user reports…OK
• Configuring Fresh Clam…OK
• Setting up storage…OK
• Setting up and starting NFS Server…OK
• Setting up and starting DHCP Server…OK
• Setting up and starting TFTP and PXE Servers…OK
• Setting up and starting VSFTP Server…Failed!

[CODE]Then I tried…[/CODE]

rick@rick-Latitude-3540:~/Downloads/vsftpd-3.0.2$ sudo apt-get install vsftpd
Reading package lists… Done
Building dependency tree
Reading state information… Done
vsftpd is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 23 not upgraded.

[CODE]So now, I have no clue… Anybody got any suggestions?[/CODE]