Posts made by radjunior

@sebastian-roth Previously I had installed Debian and installed the isc-dhcp-server package and fog in it, configured both with the same IP, a dynamic scope for boot, all according to Example 1
From that I started to find errors as presented in this topic, It was then that I had the idea of separating a VM for each one and I opted for the windows server as a DHCP server, I only changed option 66 and 67, filename = snponly.efi to boot UEFI and it worked.

Edit: You can mark this topic as resolved

@sebastian-roth I managed to solve by separating the servers in separate machines and installing the FOG again. I changed the Ip, I was successful, I managed to pass the registration of the machine but in the capture

ERROR:

Could not mount '/dev/nvme0n1p3' ( remove page file) 
Args Passed: '/dev/nvme0n1pe' 
Reason: The disk contains an unclean file system (0,0) Metadata kept in Windows Cache, refused mount. 
Failed to Mount '/dev/nvme0n1p3' The NTFS partition is in an unsafe state. Please resume and shutdown Windows fully (no hibernation or fast restarting)or mount the volume read-only with the 'ro' mount option

Edit:
FOG Server:
Version: 1.5.6
Ubuntu 10.40.0.157

DHCP server = Windows Server 10.40.0.151

@sebastian-roth Yes, it works perfectly in legacy BIOS mode.
Commands on the console:
Edit- I accessed via SSH and took a print, to improve the quality

@Sebastian-Roth
I ran the imgstat and ifstat :

My FOG server is also my DHCP server, both operate together on Debian: 192.168.1.22
I’m new to this area, How do I open the Fog console on it?
I tried to execute the command in the Debian terminal and got no results

@george1421 I managed to solve it by changing from ipxe.efi to snponly.eficonsidering that my machines are all HP and support only UEFI boot.
I managed to enter the FOG interface but I was unable to register the device to upload the image, I get the following error:

I performed tests with the notebook connected directly to my server, I disabled the option if boot security, and even then there seems to be no solution.

@george1421
I changed the settings but got another error:

researching the suggested link do I understand that I need to update my IPXE? If so, how do I do this?

@george1421
I applied the settings and got the following result:

UEFI Boot

Boot Legacy

My settings:

DHCP server: 192.168.1.22
FOG Server: 192.168.1.22
Stations: 192.168.1.100 - 150

The problem is that in UEFI he downloads the file “undionly.kpxe” but I was unable to proceed

/etc/dhcp/dhcpd.conf

option domain-name "Reginaldo Junior - Ti";
option domain-name-servers 8.8.8.8;
option space PXE;
option PXE.mtftp-ip    code 1 = ip-address;
option PXE.mtftp-cport code 2 = unsigned integer 16;
option PXE.mtftp-sport code 3 = unsigned integer 16;
option PXE.mtftp-tmout code 4 = unsigned integer 8;
option PXE.mtftp-delay code 5 = unsigned integer 8;
option arch code 93 = unsigned integer 16;
# RFC4578

use-host-decl-names on;
ddns-update-style interim;
ignore client-updates;
next-server 192.168.1.22;
authoritative;

log-facility local7;

subnet 192.168.1.0 netmask 255.255.255.0 {
  option subnet-mask 255.255.255.0;
  range dynamic-bootp 192.168.1.100 192.168.1.150;
  default-lease-time 21600;
  max-lease-time 43200;
  option domain-name-servers 192.168.1.22;
  option routers 192.168.1.1;

  class "UEFI-32-1" {
    match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00006";
    filename "i386-efi/ipxe.efi/undionly.kpxe";
    }

    class "UEFI-32-2" {
    match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00002";
     filename "i386-efi/ipxe.efi/undionly.kpxe";
    }

    class "UEFI-64-1" {
    match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00007";
     filename "undionly.kpxe";
    }

    class "UEFI-64-2" {
    match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00008";
    filename "undionly.kpxe";
    }

    class "UEFI-64-3" {
    match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00009";
     filename "undionly.kpxe";
    }

    class "Legacy" {
    match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00000";
    filename "undionly.kkpxe";
    }

}
class "pxeclient" {
  match if substring (option vendor-class-identifier, 0, 9) = "PXEClient";
  if substring (option vendor-class-identifier, 15, 5) = "00000" {
        # BIOS client
        filename "undionly.kpxe";
    }
    elsif substring (option vendor-class-identifier, 15, 5) = "00006" {
        # EFI client 32 bit
        filename   "ipxe32.efi";
    }
    else {
        # default to EFI 64 bit
        filename   "ipxe.efi";
    }
}

/opt/fog/.fogsettings

## Start of FOG Settings
## Created by the FOG Installer
## Find more information about this file in the FOG Project wiki:
##     https://wiki.fogproject.org/wiki/index.php?title=.fogsettings
## Version: 1.5.9
## Install time: seg 17 mai 2021 20:56:58 -03
ipaddress='192.168.1.22'
copybackold='0'
interface='eno1'
submask='255.255.255.0'
hostname='usco'
routeraddress='192.168.1.22'
plainrouter='192.168.1.1'
dnsaddress='192.168.1.1'
username='fogproject'
password='.RzgVvTWx8idVlknIb90'
osid='2'
osname='Debian'
dodhcp='N'
bldhcp='0'
dhcpd='isc-dhcp-server'
blexports='1'
installtype='N'
snmysqluser='fogmaster'
snmysqlpass='hQSa3KTQqA&3Pebz0S7y'
snmysqlhost='localhost'
mysqldbname='fog'
installlang='0'
storageLocation='/images'
fogupdateloaded=1
docroot='/var/www/html/'
webroot='/fog/'
caCreated='yes'
httpproto='http'
startrange=''
endrange=''
bootfilename='undionly.kpxe'
packages='apache2 bc build-essential cpp curl g++ gawk gcc genisoimage git gzip htmldoc isolinux lftp libapache2-mod-php7.3 libc6 libcurl4 liblzma-dev m4 mariadb-client mariadb-server net-tools nfs-kernel-server openssh-server php7.3 ph$
noTftpBuild=''
sslpath='/opt/fog/snapins/ssl/'
backupPath='/home/'
armsupport='0'
php_ver='7.3'
php_verAdds='-7.3'
sslprivkey='/opt/fog/snapins/ssl//.srvprivate.key'
## End of FOG Settings

I have a Linux Debian where I installed the DHCP server and the FOG Project, following the tutorials I realized that I must configure my DHCP server to allow booting via TFTP / PXE, but I don’t know where to change these options.

My DHCP Server:

My network interface:

Tutorials:
Server DHCP: https://www.youtube.com/watch?v=hqS_EuQA6pQ&ab_channel=BósonTreinamentos

FOGProject: https://www.youtube.com/watch?v=207As548aNw&ab_channel=PracticalITwithJeremyLeik