@george1421 @Tom-Elliott Just wanted to report back to say that everything looks to be working and thank you for your help!

@Tom-Elliott Gahh! I knew I was missing something. In BIOS I can switch the SATA operation mode from some sort of Intel pseudo-RAID to AHCI, and now everything appears to be working. I will report back once I have run a full test of capture and deploy. Thank you all!

@george1421 I was curious about that exact question earlier, sadly I still get no output from the command. Yeah I was wondering if I was going to be fighting uphill since the hardware is so new. Thanks again!

@george1421 That error occurred when I was running 1.3.0-RC-8.

I am currently running 1.3.0-RC8, SVN revision 5949. I followed the instructions at https://wiki.fogproject.org/wiki/index.php?title=Upgrade_to_trunk to upgrade. Just to add some additional oddness, when I started this project I was running 1.2.0 and it claimed to recognize the drive, however when trying to capture it would fail with Partclone trying to read partitions like :Commands and others that were clearly not the actual drive. Just to add some info regarding the server - it is running on Ubuntu 14.04, I held off upgrading to 16.04 as I had read that it was still potentially iffy. Thanks again for the help!

I’m hoping someone can help, I recently got started with FOG and am definitely loving it, but am running into an issue capturing images from a batch of new Optiplex 7440 AIOs. These machines have the new PCIe based SSDs and FOG doesn’t seem to be able to find the primary disk to image. I looked at https://forums.fogproject.org/topic/6319/m-2-pcie-ssd-not-recognised-in-fog and https://forums.fogproject.org/topic/6315/hp-z640-nvme-pci-e-drive and have upgraded to trunk to see if that helps, sadly no dice. I also ran lsblk -pno KNAME,MAJ:MIN -x KNAME and got no output:

When booting to perform any action (capture, debug, etc) I get the following error:

Any direction/thoguhts would be appreciated, thanks!