Posts made by purpleturtle99

@george1421 my newbie mistake! this is now resolved

@george1421 U r the man ! and yes it would make sense I stop the dnsmasq service and it worked 1st time.

BTW on Fedora 23 server it refers you back to systemctl stop dnsmasq.service

Quick reg all done

@george1421 Plugged the WAG 120N back in to see if it is router related and got the same error message?

@george1421 it is running the firmware that it came with I haven’t mugged around with the firmware at all. OK let me explain. I used to have a Ubuntu flavor Fog server working with a Cisco/linksys wag120n and this combo worked like a dream for Win 7 boxes. Not so much for Win 8.1 and 10. As the company I work for are now starting to roll out Win 10. There fore I need a fog box that can make images for Win 10. Reading a bit up on the subject I decided to use Fedora 23 server with the TL-MR4320 and to do gigabyte interfaces. To speed up the image process up a bit.

There is no device on the network for 192.168.1.20 and pings don’t work to 192.168.1.20 anyway. Basically the network is 1 X fog box(fedora 23 server) 1 X TP-Link router 1 X win 10 box

@george1421 Yes my Fog server is on 192.168.1.102, the default Gateway is a TP-Link TL-MR3420 router.
This install centos 7 line in the boot menu bug me immensely. As my DHCP conf file and the LTSP .conf file does not refer to this at all.

LTSP file:
port=0
log-dhcp
enable-tftp
tftp-root=/tftpboot
dhcp-boot=undionly.kpxe.0,192.168.1.102
dhcp-option=17,/images
dhcp-option=vendor:PXEClient,6,2b
dhcp-no-override
pxe-prompt=“Press F8 for boot menu”, 30
pxe-service=X86PC, “Boot from network”, undionly
pxe-service=X86PC, “Boot from local hard disk”, 0
dhcp-range=192.168.1.102,proxy

DHCP file:
option space PXE;
option PXE.mtftp-ip code 1 = ip-address;
option PXE.mtftp-cport code 2 = unsigned integer 16;
option PXE.mtftp-sport code 3 = unsigned integer 16;
option PXE.mtftp-tmout code 4 = unsigned integer 8;
option PXE.mtftp-delay code 5 = unsigned integer 8;
option arch code 93 = unsigned integer 16; # RFC4578

use-host-decl-names on;
ddns-update-style interim;
ignore client-updates;
next-server 192.168.1.102;

subnet 192.168.1.0 netmask 255.255.255.0 {
option subnet-mask 255.255.255.0;
range dynamic-bootp 192.168.1.5 192.168.1.20;
default-lease-time 21600;
max-lease-time 43200;
option domain-name-servers 192.168.1.102;
option routers 192.168.1.1;
filename “undionly.kkpxe”;
}

I used the following:
https://wiki.fogproject.org/wiki/index.php/Fedora_21_Server

and get the error message as per attached screenshot

https://www.dropbox.com/s/ngu4lxokblzzgyw/WP_20160614_001.jpg?dl=0

and no other DHCP server/devices in the network

The fog server issues IP address as the client machine then gets an ip address as per DHCP. The boot menu comes up press F8 for boot menu
When I select boot from network I just receive boot server: X.X.X.X TFTP.
PXE-M0F : Exiting Intel Boot Agent
Selected boot device failed. Press any key to reboot the system

Thanks it is now working

I have successfully installed Fog but without DHCP, is it possible to change this after installation. Or be uninstall ? and re-install with DHCP?
as this wiki link is a bit outdated:
https://wiki.fogproject.org/wiki/index.php/Uninstall_FOG

@Wayne-Workman
Thanks for the info that did the trick for me all up and running now. You can mark this as resolved.

/usr/bin/systemctl
grep: /opt/fog/.fogsettings: No such file or directory
There was no interface with an active internet connection found.
@Wayne-Workman 
Please see the log file below

/usr/bin/dnf
ln: failed to create symbolic link ‘/usr/lib/systemd/system/mysql.service’: File exists
ln: failed to create symbolic link ‘/usr/lib/systemd/system/mysqld.service’: File exists
ln: failed to create symbolic link ‘/etc/systemd/system/mysql.service’: File exists
ln: failed to create symbolic link ‘/etc/systemd/system/mysqld.service’: File exists
Last metadata expiration check: 0:05:09 ago on Fri Jun 10 12:42:17 2016.
No package epel-release available.
Error: Unable to find a match.
remi-release-23-3.fc23.remi.noarch
Last metadata expiration check: 0:05:13 ago on Fri Jun 10 12:42:17 2016.

docker.x86_64                         2:1.10.3-24.gitf476348.fc23       updates 
docker-forward-journald.x86_64        2:1.10.3-24.gitf476348.fc23       updates 
docker-selinux.x86_64                 2:1.10.3-24.gitf476348.fc23       updates 
gd.x86_64                             2.2.1-2.fc23.remi                 remi    
lua.x86_64                            5.3.3-1.fc23                      updates 
Obsoleting Packages
NetworkManager-l2tp-gnome.x86_64      1.0.2-1.fc23                      updates 
    NetworkManager-l2tp.x86_64        1.0.2-1.fc23                      @updates
httpd-2.4.18-1.fc23.x86_64
php-5.6.22-1.fc23.remi.x86_64
php-cli-5.6.22-1.fc23.remi.x86_64
php-common-5.6.22-1.fc23.remi.x86_64
php-gd-5.6.22-1.fc23.remi.x86_64
mariadb-10.0.23-1.fc23.x86_64
mariadb-server-10.0.23-1.fc23.x86_64
tftp-server-5.2-16.fc23.x86_64
nfs-utils-1.3.3-8.rc5.fc23.x86_64
vsftpd-3.0.2-14.fc23.x86_64
net-tools-2.0-0.35.20150915git.fc23.x86_64
wget-1.17.1-1.fc23.x86_64
xinetd-2.3.15-16.fc23.x86_64
tar-1.28-6.fc23.x86_64
gzip-1.6-9.fc23.x86_64
make-4.0-5.1.fc23.x86_64
m4-1.4.17-8.fc23.x86_64
gcc-5.3.1-6.fc23.x86_64
gcc-c++-5.3.1-6.fc23.x86_64
lftp-4.6.1-6.fc23.x86_64
Last metadata expiration check: 0:05:14 ago on Fri Jun 10 12:42:17 2016.
Installed Packages
php-mysqlnd.x86_64                  5.6.22-1.fc23.remi                   @remi  
Available Packages
php-mysqlnd.i686                    5.6.22-1.fc23                        updates
php-mysqlnd-5.6.22-1.fc23.remi.x86_64
curl-7.43.0-7.fc23.x86_64
php-mcrypt-5.6.22-1.fc23.remi.x86_64
php-mbstring-5.6.22-1.fc23.remi.x86_64
mod_ssl-2.4.18-1.fc23.x86_64
php-fpm-5.6.22-1.fc23.remi.x86_64
php-process-5.6.22-1.fc23.remi.x86_64
Last metadata expiration check: 0:05:15 ago on Fri Jun 10 12:42:17 2016.
Dependencies resolved.
Nothing to do.
Complete!
httpd-2.4.18-1.fc23.x86_64
php-5.6.22-1.fc23.remi.x86_64
php-cli-5.6.22-1.fc23.remi.x86_64
php-common-5.6.22-1.fc23.remi.x86_64
php-gd-5.6.22-1.fc23.remi.x86_64
mariadb-10.0.23-1.fc23.x86_64
mariadb-server-10.0.23-1.fc23.x86_64
tftp-server-5.2-16.fc23.x86_64
nfs-utils-1.3.3-8.rc5.fc23.x86_64
vsftpd-3.0.2-14.fc23.x86_64
net-tools-2.0-0.35.20150915git.fc23.x86_64
wget-1.17.1-1.fc23.x86_64
xinetd-2.3.15-16.fc23.x86_64
tar-1.28-6.fc23.x86_64
gzip-1.6-9.fc23.x86_64
make-4.0-5.1.fc23.x86_64
m4-1.4.17-8.fc23.x86_64
gcc-5.3.1-6.fc23.x86_64
gcc-c++-5.3.1-6.fc23.x86_64
lftp-4.6.1-6.fc23.x86_64
php-mysqlnd-5.6.22-1.fc23.remi.x86_64
php-mysqlnd-5.6.22-1.fc23.remi.x86_64
curl-7.43.0-7.fc23.x86_64
php-mcrypt-5.6.22-1.fc23.remi.x86_64
php-mbstring-5.6.22-1.fc23.remi.x86_64
mod_ssl-2.4.18-1.fc23.x86_64
php-fpm-5.6.22-1.fc23.remi.x86_64
php-process-5.6.22-1.fc23.remi.x86_64
New password: Retype new password: Changing password for user fog.
passwd: all authentication tokens updated successfully.
Failed to stop FOGMulticastManager.service: Unit FOGMulticastManager.service not loaded.
Failed to stop FOGImageReplicator.service: Unit FOGImageReplicator.service not loaded.
Failed to stop FOGSnapinReplicator.service: Unit FOGSnapinReplicator.service not loaded.
Failed to stop FOGScheduler.service: Unit FOGScheduler.service not loaded.
Failed to stop FOGPingHosts.service: Unit FOGPingHosts.service not loaded.
Failed to execute operation: No such file or directory
● mariadb.service - MariaDB 10.0 database server
   Loaded: loaded (/usr/lib/systemd/system/mariadb.service; enabled; vendor preset: disabled)
   Active: active (running) since Fri 2016-06-10 12:47:39 BST; 2s ago
  Process: 27199 ExecStopPost=/usr/libexec/mysql-wait-stop (code=exited, status=0/SUCCESS)
  Process: 27431 ExecStartPost=/usr/libexec/mysql-check-upgrade (code=exited, status=0/SUCCESS)
  Process: 27291 ExecStartPost=/usr/libexec/mysql-wait-ready $MAINPID (code=exited, status=0/SUCCESS)
  Process: 27255 ExecStartPre=/usr/libexec/mysql-prepare-db-dir %n (code=exited, status=0/SUCCESS)
  Process: 27232 ExecStartPre=/usr/libexec/mysql-check-socket (code=exited, status=0/SUCCESS)
 Main PID: 27288 (mysqld_safe)
   CGroup: /system.slice/mariadb.service
           ├─27288 /bin/sh /usr/bin/mysqld_safe --basedir=/usr
           └─27400 /usr/libexec/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib64/mysql/plugin --log-error=/var/log/mariadb/mariadb.log --pid-file=/var/run/mariadb/mariadb.pid --socket=/var/lib/mysql/mysql.sock

Jun 10 12:47:38 localhost.localdomain systemd[1]: Starting MariaDB 10.0 database server...
Jun 10 12:47:38 localhost.localdomain mysqld_safe[27288]: 160610 12:47:38 mysqld_safe Logging to '/var/log/mariadb/mariadb.log'.
Jun 10 12:47:38 localhost.localdomain mysqld_safe[27288]: 160610 12:47:38 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql
Jun 10 12:47:39 localhost.localdomain systemd[1]: Started MariaDB 10.0 database server.
Generating RSA private key, 4096 bit long modulus
.........................................................................................++
...............................++
e is 65537 (0x10001)
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [XX]:State or Province Name (full name) []:Locality Name (eg, city) [Default City]:Organization Name (eg, company) [Default Company Ltd]:Organizational Unit Name (eg, section) []:Common Name (eg, your name or your server's hostname) []:Email Address []:Generating RSA private key, 4096 bit long modulus
................................++
.....................................................................................................++
e is 65537 (0x10001)
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [XX]:State or Province Name (full name) []:Locality Name (eg, city) [Default City]:Organization Name (eg, company) [Default Company Ltd]:Organizational Unit Name (eg, section) []:Common Name (eg, your name or your server's hostname) []:Email Address []:
Please enter the following 'extra' attributes
to be sent with your certificate request
A challenge password []:An optional company name []:Signature ok
subject=/CN=192.168.1.102
Getting CA Private Key
ln: failed to create symbolic link ‘/var/www/html/fog/fog’: File exists
● httpd.service - The Apache HTTP Server
   Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled; vendor preset: disabled)
   Active: active (running) since Fri 2016-06-10 12:48:36 BST; 2s ago
 Main PID: 27608 (httpd)
   Status: "Processing requests..."
   CGroup: /system.slice/httpd.service
           ├─27608 /usr/sbin/httpd -DFOREGROUND
           ├─27615 /usr/sbin/httpd -DFOREGROUND
           ├─27616 /usr/sbin/httpd -DFOREGROUND
           ├─27618 /usr/sbin/httpd -DFOREGROUND
           ├─27621 /usr/sbin/httpd -DFOREGROUND
           ├─27623 /usr/sbin/httpd -DFOREGROUND
           └─27625 /usr/sbin/httpd -DFOREGROUND

Jun 10 12:48:36 localhost.localdomain systemd[1]: Starting The Apache HTTP Server...
Jun 10 12:48:36 localhost.localdomain httpd[27608]: AH00558: httpd: Could not reliably determine the server's fully qualified domain name, using localhost.localdomain. Set the 'ServerName' directive globally to suppress this message
Jun 10 12:48:36 localhost.localdomain systemd[1]: Started The Apache HTTP Server.

● php-fpm.service - The PHP FastCGI Process Manager
   Loaded: loaded (/usr/lib/systemd/system/php-fpm.service; enabled; vendor preset: disabled)
   Active: active (running) since Fri 2016-06-10 12:48:36 BST; 2s ago
 Main PID: 27609 (php-fpm)
   Status: "Ready to handle connections"
   CGroup: /system.slice/php-fpm.service
           ├─27609 php-fpm: master process (/etc/php-fpm.conf
           ├─27610 php-fpm: pool www              
           ├─27611 php-fpm: pool www              
           ├─27612 php-fpm: pool www              
           ├─27613 php-fpm: pool www              
           └─27614 php-fpm: pool www              

Jun 10 12:48:36 localhost.localdomain systemd[1]: Starting The PHP FastCGI Process Manager...
Jun 10 12:48:36 localhost.localdomain systemd[1]: Started The PHP FastCGI Process Manager.

New install on Fedora 23 server. With Gnome finally installed ran the installer version 8056 and it just hangs after the message “changing permissions on SQL log files” any ideas?

Thanks K0R, valid point who would have thought that an HP ProBook 4530s has got an ide hdd??? SORTED

No I have sysprep yet I want this golden image to b perfect so I was testing it out on other laptops. I will test the sysprep method as per one of the tuts with the driver pack folder. Thanks for the help there Tom

I created my master image painstakingly on Hyper-V. Tested these image to new created VM all working. I then copied this master/golden image to a physical fog server in work. Copy the image to the correct folder. And added this image to the server. The image deploys without any issues. But the laptop that I have deployed it too the just BSOD on me. Can’t be fixed via chkdsk or windows repair.

I have gone the sysprep route yet as I want to make sure I can deploy this image to most of the laptop I will need to.

Fog server: 1.2.0 laptop win7 64 bit

is it a driver issue because it is a VM??

Hi Jah, I have been using Hyper-V to do some Win7 64 bit images. You have to have a legacy NIC on the Vm and the boot order in the BIOS must be this legacy NIC. And the Fog server doing the DHCP

I have been creating my Master/golden image on a Hyper-V. And the image is now solid, tested and deployed at every stage of the development. As this image is on Hyper -V is Ubuntu fog server 1.2.0 and I would like to move the image/s to a physical box also Ubuntu. I take it to copy it into the image dir but surely you need to update the mysql db to reflect these image additions.

If some can be so kind as to write a short tut on how to do all this and all the pitfalls for the process that would be greatly appreciated.

as always thanks for the help and quick responses

all fixed I did a sudo wget [url]https://sourceforge.net/projects/freeghost/files/latest/download?source=[/url] and re-installed FOg seems to be working now

@need2I never give mysql a password, and installed along with fog not seprerate