Posts made by otomoton

That seems to have fixed the GUI. Thanks!
Only problems I see now is that under the active directory settings when I put in the encrypted password and tell it to save. After saving the settings the encrypted password changes to a much larger string that does not resemble what I entered.

Have any instructions on how to upgrade the SVN? I’m not super familiar with linux, I don’t know if I just run the same command if it will upgrade or will I lose anything?
No idea on php-mcrypt, I loaded from the SVN originally and it did whatever it was it needed to do.

Here you go. The errors are toward the bottom, but there are plenty all through out.

[url=“/_imported_xf_attachments/1/1436_error.txt?:”]error.txt[/url]

I have been using for fairly successfully for a few weeks now until today. I was changing a setting to image some new machines and when I clicked to save the settings I was greeted with a blank page. Hitting the back button took me back but the settings I changed were not saved. This is happening with every page that has a setting that can be changed and saved. I restarted the fog server for good measure but it didn’t change anything.
What is broken? Can it be fixed without a reinstall?
I am using version 2203.

Here is my log file of the current install if it helps.

[url=“/_imported_xf_attachments/1/1305_foginstall.txt?:”]foginstall.txt[/url]

option 66/67 are configured correctly (pointing at 10.50.10.98 (the FOG server)) and they are the same on both of my DHCP servers (one is a failover if the other goes offline, and on a different subnet). Is there anything more I should be putting in besides the IP address?

[quote=“Tom Elliott, post: 35584, member: 7271”]Sounds like your internal subnet needs to have the ip-helper’s setup to point back to that ranges DHCP scope as well.[/quote]

How do I go about doing that?

This is what a successful boot looks like before the FOG menu
[ATTACH]1301[/ATTACH]

[url=“/_imported_xf_attachments/1/1301_IMAG0063.jpg?:”]IMAG0063.jpg[/url]

[quote=“madskillz23, post: 35558, member: 8206”]Are you sure its not a firewall issue between subnets?[/quote]
It shouldn’t be. Our isp controls our firewall, but they allow this sort of traffic. That doesn’t explain whty it would work on external to it subnets and not it’s own.

[quote=“cadyfish, post: 35555, member: 24458”]So I take it if “it was working before” you could image but you were having issues after deployment with the machine just boot looping through fog?

Maybe try this post [url]http://fogproject.org/forum/threads/chainloading-ipxe.10915/[/url][/quote]

No.
I successfully imaged 30 machines in location B. They did exactly what they were supposed to and are currently running.
I cannot get FOG to even start on the machines in location A (where the server is located). When the bios loads and starts getting the info from the server it fails to load something from iPXE. Here is a screen shot.
[ATTACH]1300[/ATTACH]
It never brings up the FOG menu

[url=“/_imported_xf_attachments/1/1300_image.jpg?:”]image.jpg[/url]

Yes working normally means every building but the one it is located in.
Yes, I can ping the FOG server from the computers it’s failing on, and they have full connectivity. As does FOG .

Oh, I guess I wasn’t clear everything I did. I had it working normally before I tried the chainloading work around. My DHCP server was already pointing to it and working great. It works great in every building except the one it is located in. That is where I get the operation not supported error instead of the fog screen.

I have buildings A, B, C, D, and E. Fog is in A. I can image computer successfully in B, C, D, E, but not in A.

[INDENT]Hello.
I am working on using FOG to deploy images to a multi-building school campus. Our buildings are in different locations in the town and have different subnets ie; 10.50.14.x , 10.50.17.x, etc.
I have run across a peculiar problem.
I have the server installed in one building and can image to a different subnet that what it’s on (it’s 4 miles across town away, but it’s fiber so it works fast). I however cannot image computers in the same building as the server.
The building it’s in has a subnet range of 10.50.8.x to 10.50.15.x, and I can image to another building that is 10.50.16.x to 10.50.24.x but not to the same subnet range that it resides on.

I get an error message once iPXE starts going.

"iPXE 1.0.0+ (8b294) etc etc
configuring (net0 xxx:x)… ok
could not start download: operation not supported ([url]http://ipxe.org/3c092003[/url])

It makes no sense to me, but I am not a linux guy. I followed the instructions to chainload pxe to ipxe using pxelinux.0 and it made no impact. I formerly used clonezilla for imaging and never had any problems between subnets but it used pxelinux.0.[/INDENT]
[INDENT]I am running FOG 2203, just installed it from the SVN[/INDENT]
[INDENT]These machines are all the same model / bios revision, and I have tried reinstalling fog on various flavors of linux (ubuntu 10.x, 12.x, 14.x, and debian 7.6) and they all behave the same, except that ubuntu has issues with mysql not starting and the settings page link not working.[/INDENT]

Please Delete, I think this is in the wrong area.