Posts made by orbspider

funny as theres no firewall I dont think, its a fresh install of debian

well yes there was an interruption, as this isn’t the first install’s log, but subsequent, after it got stuck as well.

apache log can’t post here, so its at pastebin

[url]http://pastebin.com/FAYdac7U[/url]

ive searched a plenty… and my eyes are square, so i will need to leave this till tomorrow.

here it is,

[CODE] Here are the settings FOG will use:
Base Linux: Debian
Detected Linux Distribution: Debian
Installation Type: Normal Server
Server IP Address: 192.168.0.142
DHCP router Address: 192.168.0.1
DHCP DNS Address: 192.168.0.1
Interface: eth0
Using FOG DHCP: 0
Internationalization: 0
Donate: 0

    DHCP will NOT be setup but you must setup your
    current DHCP server to use FOG for PXE services.

    On a Linux DHCP server you must set:
        next-server

    On a Windows DHCP server you must set:
        option 066 & 067

      Option 066 is the IP of the FOG Server: (e.g. 192.168.0.142)
      Option 067 is the undionly.kpxe file: (e.g. undionly.kpxe)

Are you sure you wish to continue (Y/N) y

Installation Started…

Installing required packages, if this fails
make sure you have an active internet connection.

• Preparing apt-get

• Installing package: apache2

• Installing package: php5

• Installing package: php5-json

• Installing package: php5-gd

• Installing package: php5-cli

• Installing package: php5-mysql

• Installing package: php5-curl

• Installing package: mysql-server

  We are about to install MySQL Server on
  this server, if MySQL isn’t installed already
  you will be prompted for a root password.

  Press enter to acknowledge this message.

E: dpkg was interrupted, you must manually run ‘sudo dpkg --configure -a’ to correct the problem.

• Installing package: mysql-client
• Installing package: tftpd-hpa
• Installing package: tftp-hpa
• Installing package: nfs-kernel-server
• Installing package: vsftpd
• Installing package: net-tools
• Installing package: wget
• Installing package: xinetd
• Installing package: sysv-rc-conf
• Installing package: tar
• Installing package: gzip
• Installing package: build-essential
• Installing package: cpp
• Installing package: gcc
• Installing package: g++
• Installing package: m4
• Installing package: htmldoc
• Installing package: lftp
• Installing package: openssh-server
• Installing package: php-gettext
• Installing package: clamav-freshclam

Confirming package installation.

• Checking package: apache2…OK
• Checking package: php5…OK
• Checking package: php5-json…OK
• Checking package: php5-gd…OK
• Checking package: php5-cli…OK
• Checking package: php5-mysql…OK
• Checking package: php5-curl…OK
• Checking package: mysql-server…OK
• Checking package: mysql-client…OK
• Checking package: tftpd-hpa…OK
• Checking package: tftp-hpa…OK
• Checking package: nfs-kernel-server…OK
• Checking package: vsftpd…OK
• Checking package: net-tools…OK
• Checking package: wget…OK
• Checking package: xinetd…OK
• Checking package: sysv-rc-conf…OK
• Checking package: tar…OK
• Checking package: gzip…OK
• Checking package: build-essential…OK
• Checking package: cpp…OK
• Checking package: gcc…OK
• Checking package: g++…OK
• Checking package: m4…OK
• Checking package: htmldoc…OK
• Checking package: lftp…OK
• Checking package: openssh-server…OK
• Checking package: php-gettext…OK
• Checking package: clamav-freshclam…OK

Configuring services.

• Setting up and starting MySql…OK

• Backing up user reports…OK

• Setting up and starting Apache Web Server…OK
  You still need to install/update your database schema.
  This can be done by opening a web browser and going to:

  http://192.168.0.142/fog/management

Press [Enter] key when database is updated/installed.

• Configuring Fresh Clam…OK
• Setting up storage…OK
• Setting up and starting DHCP Server…Skipped
• Setting up and starting TFTP and PXE Servers…OK
• Setting up and starting VSFTP Server…OK
• Setting up sudo settings…OK
• Setting up FOG Snapins…OK
• Setting up and building UDPCast…OK
• Installing init scripts…OK
• Setting up FOG Services…OK
• Starting FOG Multicast Management Server…OK
• Starting FOG Image Replicator Server…OK
• Starting FOG Task Scheduler Server…OK
• Setting up FOG Utils…OK

Would you like to notify the FOG group about this installation?
* This information is only used to help the FOG group determine
if FOG is being used. This information helps to let us know
if we should keep improving this product.

Send notification? (Y/N)n
NOT sending notification.

Setup complete!

You can now login to the FOG Management Portal using
the information listed below. The login information
is only if this is the first install.

This can be done by opening a web browser and going to:

  http://192.168.0.142/fog/management

  Default User:
        Username: fog
        Password: password

Script done on Thursday 12,February,2015 12:31:18 AM SGT[/CODE]

so whats the reason for no access to [url]http://192.168.0.142/fog/management[/url] ? tnx

the file /var/www/fog/commons/config.php did not exist

the file /opt/fog/service/etc/config.php

i added the mysql password to like so

<?php
define( “MYSQL_PASSWORD”, “xxxx” );
define( “WEBROOT”, “/var/www/fog” );
?>

Hi there,
i’ve been trying for hours now to install fog 1.2.0 by following the instructions at [url]http://www.fogproject.org/wiki/index.php/Installation_on_Debian_Lenny[/url]
because my OS is Debian Wheezy.

I’ve installed MYSQL with and without password and either way I can’t get into the fog management page at the address which the fog install script gave me to use - it just shows “connecting” for a long while then time out.

I actually installed mysql-server first before fog script ran, and in its conf file /etc/mysql/my.cnf I # out the bind-address, as the only way for the service to start.

what should I be looking at as solution to getting into fog management? it appears apache and mysql are running ok. … thanks