Hi,
my english is not good, sorry. Into my east german school I must learning the russian language …
The SSD-Image is “downloaded” properly. The “upload” or “deployed” I will testing into the future ( one or two hours). I seeing freeze of the Client from time to time …
Yes, the FOG-Host is a very slowly Pentium4-Machine.
Thank you for the answer and I wish you a good time.
Hi Developer and Friends of FOG,
I have two almost identical machines here, one with and one without SSD.
FOG works with both machines, the upload and the Deployed runs flawlessly on both machines. But the one with the SSD shows error.
SAM_1972.jpg is error-free indication from the machine without SSD, SAM_1971.jpg the FOG-screen of the machine with SSD and SAM_1969.jpg the screen of the client with SSD and the running faulty display.
Please write me something about it, I am now a fan of FOG and would like to contribute a little to the development of beta.
Many friendly greetings.
[url=“/_imported_xf_attachments/0/601_SAM_1969.JPG?:”]SAM_1969.JPG[/url][url=“/_imported_xf_attachments/0/602_SAM_1971.JPG?:”]SAM_1971.JPG[/url][url=“/_imported_xf_attachments/0/603_SAM_1972.JPG?:”]SAM_1972.JPG[/url]
Hi Tom,
after I have now removed the broken network-hub and now again use the FOG Version 0.32 , everything seems to work very satisfactorily .
I have learned over the past few days a lot about Linux and FOG.
If, nevertheless, again if problems arise , I am back.
Once again many thanks for the support with my first steps with FOG and friendly greetings.
Hi Tom,
please excuse me, I have robbed you of the time.
I believe the cause of the problems we have found:
it was not the TFTP server and not a NIC, but a hub on the LAN. I have replaced the hub to a switch, and now I can at least two of the three problematic computer with PXE boot and select the menu.
I would have found this my mistake never without the advice from you!
Nevertheless, an error still comes up:
Menu Compatibility:
Error 0x040ee119
The error is probably related to IPv6. This error will certainly be repaired.
Another mistake is to look at the attached photo, maybe you can write something about it.
Best regards and many thanks once again and apologize.
[url=“/_imported_xf_attachments/0/587_SAM_1962.JPG?:”]SAM_1962.JPG[/url]
Hi Tom,
c&p and my answers:
SAM_1961.JPG (You’re doing a system client check?)Yes.
This is showing nothing about a task. It looks like you chose the boot into System information mode and chose the compatibility check which all succeeds. Is this true? Yes.
Are this pictures from the same system? Yes.
Which one was a tasking set for that failed? Yes.
I testing three systems, where FOG not works. Today I must send many pictures from the another machines.
Thank you very much and many greetings.
Hi Tom,
the picture named SAM_1957.JPG display after waiting for approx. 30 - 45 [I][U]minutes[/U][/I]; another machine I wait for 1 - 5 [U][I]seconds[/I][/U] …
upload or deploy not works.
It´s great!
I booting things to 192.168.115.19 and FOG works!
But that did not work also 0.33B with my three problematic machines.
I’ve been waiting a long time before the screen and three pictures taken, maybe you can recognize it, the cause of the delays.
[url=“/_imported_xf_attachments/0/582_SAM_1957.JPG?:”]SAM_1957.JPG[/url][url=“/_imported_xf_attachments/0/583_SAM_1959.JPG?:”]SAM_1959.JPG[/url][url=“/_imported_xf_attachments/0/584_SAM_1961.JPG?:”]SAM_1961.JPG[/url]
The new System is Ubuntu Host 192.168.115.20 and FOG 192.168.115.20.
But 192.168.115.20/fog/management Dashboard displays at 192.168.115.19 for web server and tftp server.
Okay,
the installation worked.
Now continue:
192.168.115.20/fog/management -> Home:
Web server: 192.168.115.19
TFTP Server: 192.168.115.19
Disk Information: Failed to connect to
192.168.115.19 was an attempt to circumvent the previously failed installation …
Can you please give me more hints? Thank you.
Hi Tom,
the three problematic motherboards have no EFI BIOS, they are about 3-5 years old.
I have now been newly started on another PC Ubuntu 12.04 and FOG 0.33B installed.
When configuring the FOG comes right at the beginning a mistake:
What is the IP address to be used by this FOG Server: [address 192.168.115.20]
Invalid IP address!
In this case, this address is the static IP address of my Ubuntu host!
I think that the DHCP server, TFTP server, and the host must have the same IP address, in my case 192.168.115.20.
I come here not just continue and ask for help.
Many greetings.
(translated with google)
Hi Tom,
I removed all the parameters \n from the default file, unsuccessfully. After a waiting time of about one minute, the FOG menu is visible, by selecting an item from the menu, you see the message " Loading fog / kernel / bzImage … " then sometime after an even longer wait time "Boot failed: press a key to retry , or wait for reset … " it goes no further .
The problem only affects my PC in which an Intel dual-core processor is installed.
PC with motherboard ASUS M3N78 -VM with AMD Athlon 64X2 FOG works
PC with ASUS P5W DH Deluxe motherboard with an Intel Core2 Quad CPU FOG does not work
PC with motherboard ASUS P5RD2 -VM with Intel Pentium D CPU FOG does not work
FSC ESPRIMO E5925 PC with Intel Core2 Duo CPU E8400 FOG does not work
I have the settings in the BIOS largely compared and adjusted , still without success in terms of FOG .
Do you please have any advice for me ? Thank you .
Friendly greetings .
(German original)
Hallo Tom,
ich entfernte alle Parameter \n aus dem default file, erfolglos. Nach einer Wartezeit von etwa einer Minute ist das FOG-Menü zu sehen, nach Auswahl einer Option aus dem Menü sieht man die Meldung “Loading fog/kernel/bzImage…”, dann irgendwann nach noch längerer Wartezeit “Boot failed: press a key to retry, or wait for reset…” es geht nicht weiter.
Das Problem betrifft nur meine PC, in die ein Intel DualCore-Prozessor eingebaut ist.
PC mit Motherboard ASUS M3N78-VM mit AMD Athlon 64X2 FOG funktioniert
PC mit Motherboard ASUS P5W DH Deluxe mit Intel Core2 Quad CPU FOG funktioniert nicht
PC mit Motherboard ASUS P5RD2-VM mit Intel Pentium D CPU FOG funktioniert nicht
PC FSC ESPRIMO E5925 mit Intel Core2 Duo CPU E8400 FOG funktioniert nicht
Ich habe die Einstellungen im BIOS weitgehend verglichen und angepasst, trotzdem ohne Erfolg in Bezug auf FOG.
Hast Du bitte noch einen Rat für mich? Vielen Dank.
Freundliche Grüße.
(Google translated)
Update:
I have now tested different NIC on the motherboard ASUS P5W DH Deluxe (Realtek, D-Link, Intel, NoName), all with the same negative result.
I now suspect that the cause of the problem is that the motherboards in question dual-core or quad-core processors are built in and there I made an incompatible setting. With the motherboard ASUS M3N78-VM FOG works but, but also there is a dual core processor installed. If it is up to the BIOS settings of processor, South or North bridge - where to look?
Each of the FOG properly registered LAPTOP IMMEDIATELY works without problems, but I have unfortunately only notebooks with a single-core processor …
Is there still any hints please? Thank you.
[url=“/_imported_xf_attachments/0/581_SAM_1947.JPG?:”]SAM_1947.JPG[/url]
Hi Developers and all,
please take al look at the end of thread
[url]http://fogproject.org/forum/threads/problems-for-ip-configuration-for-fog.10123/[/url]
and give me please any hints for resolve this Problem. Thank you very much and many greetings.
Sorry for crosspost …
Hi all,
my PC with Mainboard ASUS P5RD2 VM has the same error like my PC with Mainboard ASUS P5W DH Deluxe (Image in post #11).
Please give me hints for resolving the problem, many thanks.
edit:
now I try another PC (FSC Esprimo E5925), it´s the same Problem …
edit 2:
now I trying PC with Mainboard ASUS M3N78-VM, Chipset Nvidia Geforce 8200, MCP78S, LAN Nvidia nForce build-in Gigabit MAC with external Realtek 8211CL-GR PHY, AND FOG WORK´S !!
(Windows 8.1 64bit, Image Type “Other Windows”)
[I] I confused …[/I]
edit 3:
Now I’ve tried desktop to circumvent the problem with the installation of Intel Pro/1000 GT Adapter, unfortunately without success. In all three problematic computers the same failure (see photo post#11).
Now I do not go on and ask for help.
Hallo madeyem,
ganz vielen Dank fürs übersetzen und für die Hilfe.
Ich habe jetzt einen hardware-identischen Client mit Windows7 Home 32bit hergenommen und siehe da, damit funktioniert der Upload!
Also nochmals:
ich besitze zwei Notebooks FSC C-Series Lifebook, auf dem einen ist Windows XP, auf dem anderen Windows7. die Hardware ist bis auf die RAM-Größe identisch. Damit funktioniert FOG, sowohl unter XP als auch unter Windows7.
Das Foto in #11 ist von einem weiteren Client mit Windows7 Home 64bit, es ist ein Mainboard P5W DH Deluxe verbaut, der Chipsatz ist Intel 975X ICH7R, 8GB RAM, ein Quadcore-Prozessor. PXE-Boot ist im BIOS aktiviert und holt sich die DHCP-Adresse; nur wie auf dem Foto in #11 dargestellt macht TFTP Schwierigkeiten.
Vielleicht hilft das einem potenziellen Helfer weiter.
Danke nochmals und freundliche Grüße.
(Google translated)
very thanks for translating and for the help.
I now trying with a hardware-identical client with Windows7 Home 32bit and lo and behold, so does the upload!
So once again:
I have two notebooks FSC Lifebook C Series, on the one hand, Windows XP, on the other Windows7. the hardware is identical to the RAM size. This works FOG, under both XP and Windows7.
The photo in # 11 is installed by another client with Windows7 Home 64bit, it is a P5W DH Deluxe motherboard, the chipset is Intel 975X ICH7R, 8GB RAM, a quad core processor. PXE boot is enabled in the BIOS and gets the DHCP address, just like in the photo in # 11 is shown makes TFTP difficulties.
Maybe this helps a potential helper.
Thanks again and best regards.
Hi,
ja, das PXE-Boot im windows7-Client ist korrekt aktiviert. Ich habe auch die fogprep.exe gestartet. Die Datei pxelinux.cfg/default habe ich bisher nicht angefasst.
Hallo madeyem,
dnsmasq auf der Fritzbox setzt voraus, dass man ein modifiziertes Firmware-Image auf die Box bringt (freetz), das wollte ich mir bzw. der Box nicht antun.
Es laufen also jetzt 2 DHCP-Server nebeneinander, einmal die Range 192.168.115.150 - 199 auf der Fritzbox, der FOG-DHCP bedient die Range 192.168.115.21 - 35; der FOG-Server selbst hat die 192.168.115.20.
Soweit funktioniert jetzt der DHCP-Dienst, und mit einem XP-Client funktioniert auch TFTP. Einen upload habe ich damit bereits ausgeführt, zumindest im debug-Modus.
Ein kleines Problem bleibt aber noch: mit einem Windows7-Client funktioniert TFTP immer noch nicht. Ich hänge ein Foto an, worauf die Fehlermeldung zu sehen ist.
Danke für jeden Tipp zur Lösung des Problems; jeder Hinweis ist willkommen!
Viele Grüße.
[url=“/_imported_xf_attachments/0/579_SAM_1947.JPG?:”]SAM_1947.JPG[/url]
(google translated)
Hello,
my DHCP problem I can solve. My router (Fritz!Box 7270) with the IP address 192.168.115.5 was entered in the / etc / dhcp / dhcpd.conf as “next server”.
Nevertheless, I still can not get further. Now comes on the client after the PXE boot the error:
PXE-E32: TFTP open timeout
TFTP …
Do you please have a tip for me, how I can solve this problem? Now already many thanks and best regards.
(german origin)
Hallo,
mein DHCP-Problem habe ich lösen können. Mein Router (Fritz!Box 7270) mit der IP-Adresse 192.168.115.5 wurde in die /etc/dhcp/dhcpd.conf als “next server” eingetragen.
Trotzdem komme ich immer noch nicht weiter. Jetzt kommt auf dem Client nach dem PXE-Boot der Fehler:
PXE-E32: TFTP open timeout
TFTP …
Habt ihr bitte noch einen Tipp für mich, wie ich dieses Problem lösen kann? Jetzt schon vielen Dank und freundliche Grüße.
Hallo madeyem,
mir ist folgendes noch nicht ganz klar:
wo muss ich die Optionen 66 und 67 eintragen? Du schreibst “im DHCP”, wo bitte ist das genau? Im Client läuft die PXE-Boot-Option, der Client wartet auf eine IP-Adresse, die ihm per DHCP vergeben werden soll, aber er wartet vergebens und bricht den Vorgang nach einigen Sekunden ab. Wenn ich den Host wo der FOG drauf läuft (Ubuntu 12.04 32bit) als DHCP-Server den Dienst des FOG nehme, kann ich dort in die Konfiguration etwas eintragen, kein Problem. Aber auf der Fritzbox die normalerweise auch mein DHCP-Server ist geht das nicht, jedenfalls wüsste ich nicht wie das dort zu machen wäre.
Bitte noch einen kurzen Hinweis, was ich genau wo eintragen muss, vielen Dank.
Freundliche Grüße.
(translated by Google continued)
Hi all,
I have come with your help a few steps further. But still not up to success.
I start with the FOG Task to upload and here ends my art. The client restarts not boot with PXE and gets an IP address via DHCP. I have the / etc / network / dhcpd.conf file processed in order to operate next to the DHCP server of my router another DHCP server can, and I have the DHC server of my router disabled, all to no avail.
The client waits for an IP address, then aborts the process and it will boot to the operating system.
Please: Where can I keep looking for my mistakes?
I would like to create it in the end, to transmit a pre-defect-free image of a calculator on eight computers in a LAN (all Vista machine with the same hardware).
Please continue to give me help, thank you.
Friendly greetings.