Posts made by OlivierT82

@george1421 said in Error for create image:

OK so the question is what is in the 4th physical partition on that hard drive. FOS is reporting the structure is incorrect. If you take a similar system and try to capture it do you get the same error?
My idea is that this hard drive has a problem in its partition layout. The operating system doesn’t appear to have an issue with it, but when its cloned partclone isn’t happy

I did not have time to do this test
I will do it Monday and I will inform you
Thank you and good we

@oliviert82
I did the tests with the Dell utility and the chkdsk / r command and the result is always the same

@quazz said in Error for create image:

4 partitions was the default for Windows 10 UEFI. I think they changed it to 3 for new installs down the road somewhere, though.
Anyway, you should run chkdsk /r on every partition. Boot of a Windows 10 install media, assign letters to each volume, run the check.

I’m checking the disk with the command chkdsk / r
I give you the result as soon as it is finished

@george1421
Apparently no problems detecting with the Dell Utility - I initiated a thorough review

@george1421
I ran the Dell Utility
I give you the result tomorrow because I have the PC at my desk
thank you for your help

@oliviert82
i use Dell utility

@george1421 said in Error for create image:

Ok no problem. I’m in the USA but I am usually on until I go to bed. I would scan this target computer to see if windows can find the flaw on partition #4

You want me to scan with what as a command
Chkdsk?

@george1421
I am sorry but I have to leave - I try to continue to exchange on the subject - I do not know in what country you live, so with the jet lag !!!

@george1421
Yes it is a pc in OEM
A few months ago I had already captured it and it had worked well - I had a mistake of this kind and I had run the command powercfg - h off and then it had worked

Is this really the same message? I remember it more accurately - in any case I execute this command and always the same thing

@george1421 said in Error for create image:

I’m asking about the computer that printed the error in the picture. Tell us a bit more about that.

Is the above information sufficient?
I have this message after booting on the PXE

@george1421 said in Error for create image:

Hello Olivier welcome to the FOG forums.
First can we collect a bit of background information on this computer?
Who manufacturers it and what model is it?
Do you know the raid adapter used in this target computer?
We may need to enable a kernel parameter mdraid=yes (I think that’s it).
I think the next steps (after data collection) is to configure a new capture task. This time we will select the option to debug this task. That will tell the pxe booting client to not run the deployment script right away, but drop us to a linux command prompt so that we can run some diagnostic commands.
But first lets get some details so we know what we are talking about

The computer is a Dell Optiplex 3240 and there is no RAID on this PC

Or do I change the “kernel mdraid” parameter?

How do I enable debug mode?

PJ equal Attachment
The Fog server is virtualized and this has already workede?

Hi
I did the update but still the same error

Thank you
i proced to update and new test

How to update ??

269/5000
I have installed fogproject 1.3.4
I already created and deploy images with this version but today I have a problem
I deployed an image on a PC, I updated it and I can not capture it
In PJ the error message
Do you have an idea ?

@george1421
Hi,
I reshaped and deployed the image
All is Ok now
thanks for your help

@george1421 said in unable to deploy the image:

The FTP account is listed for the storage node of the FOG server. Listed under Storage Management in the FOG GUI.

I modified in this section - I wait for the capture to finalize to see if it moves the image

thank you for the information
I am trying to redo the image and I will see if it moves or not the image at the end of the capture
In which menu should the account that is used for the FTP appear?
I’ll keep you posted tomorrow

@george1421 said in unable to deploy the image:

Will you show output of ls -la /images/dev ?
If we find something in /images/dev then we have a chance to fix it. I might think we will see /images/dev/<mac_address> directory in there

drwxrwxrwx 4 root root 4096 mars 9 11:35 .
drwxrwxrwx 4 root root 4096 mars 5 22:47 …
drwxrwxrwx 2 root root 4096 mars 9 18:38 18dbf234b395
-rwxrwxrwx 1 root root 0 mars 5 22:47 .mntcheck
drwxrwxrwx 2 root root 4096 mars 5 22:47 postinitscripts