Posts made by mitnotromney

@george1421, Let me check shortly. And that’s where I’m feeling really lost at. Obviously, I’m doing something wrong. I feel like I’m following the install exactly but I think my network setup is making this more of an issue, that and I’m trying to pxe boot vm’s. I’m sure that’s not helping.

@Sebastian-Roth I used this link to install fog.

I’m running Fog on Ubuntu in this instance, and it’s on a physical server on it’s own VLAN. I set it up to have Fog handle DHCP. The virtual machine that screenshot is from is running on the server I mentioned in VirtualBox. Let me know any pertinent information you need and I’ll get it.

Hey guys. I’ve been working on installing and setting up Fog at home before I deploy it at work. I’ve gotten most of my issues fixed, but now I’m landing on a new one that I can’t find documentation for.

The server goes up fine but any machine I boot to gets stuck on this:

Any thoughts?

@Sebastian-Roth I think the root of my issue was my setup. I have a 5 port switch that the machine I was using to work on Fog was hooked up to. After I read your comment I went in and completely rewired my house. I’m happy to say that I was able to get Fog up and running. I’m not sure how the switch kept this from working (https://www.netgear.com/support/product/GS605.aspx), but I hooked this machine up to the router and it ran smooth.

Sorry for the pointless ticket. If you still need anything from me, I’m happy to help.

@Sebastian-Roth I just ran them with sudo and got the same result:

default via 192.168.1.1 dev eno1 proto dhcp metric 100 
169.254.0.0/16 dev eno1 scope link metric 1000 
192.168.1.0/24 dev eno1 proto kernel scope link src 192.168.1.241 metric 100

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
    link/ether 34:17:eb:d4:6a:d2 brd ff:ff:ff:ff:ff:ff

Also, I thought I should bring this up, I use a pi-hole to handle my dhcp and dns. Not sure if that would mess with the installer, but wanted you to be aware.

@Sebastian-Roth Sorry it took so long. Here’s what I got:

mit@mit-OptiPlex-9020:~$ ip -4 route show
default via 192.168.1.1 dev eno1 proto dhcp metric 100 
169.254.0.0/16 dev eno1 scope link metric 1000 
192.168.1.0/24 dev eno1 proto kernel scope link src 192.168.1.241 metric 100 

mit@mit-OptiPlex-9020:~$ ip -4 link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
    link/ether 34:17:eb:d4:6a:d2 brd ff:ff:ff:ff:ff:ff

Let me know if I can run anything else. I’m pretty free tonight.

Hi all.

Complete noob to Fog and I’ve tried running this on my Mint Station as well as my Ubuntu station. Right after selecting normal instalattion I’m faced with this snippet:

We found the following interfaces on your system:
      * eno1 - 192.168.1.241/24
Device "macvtap0@" does not exist.
      * macvtap0@ - 

  Would you like to change the default network interface from eno1 macvtap0@?
  If you are not sure, select No. [y/N] 

No matter what if I select yes or no it keeps coming back up and I can’t get any further. I’ve tried hitting up Google but I’m not able to find anything. Is anyone familiar with this?