I think we are good folks, sorry to bother!

Thanks for timely answers and support.

Cheers

May have just figured it out,

Had to poke the network engineer that help me set this up about a year ago…forgot to mention FOG is not using DHCP but rather our internal infoblox.

My engineer went in a changed the kernel to undionly.kkpxe on the infoblox side and the 5510 was able to boot to the FOG UI.

So thats done for now. Further testing is needed to see if I didnt break anything/still can image my latitudes.

Where do I make that configuration change? Is it /tftpboot/pxelinux.cfg/default and change ipxe.krn to undionly.kkpxe? Or is it here in the FoG web management page?

Seems to be hanging while loading ipxe…attached is a Google drive link…

https://drive.google.com/file/d/0B8EiGhaPifiYN0ptNVViSjh6RVU/view?usp=sharing

Switched to undionly.kkpxe and still hangs…

The forums isn’t letting me upload images but it hangs right at the pxe boot screen. It does no display any errors so it looks successful but merely comes to a hard stop.

The adaptor I am using is the OEM Dell USB-C to Ethernet that comes with every machine.

Output below

Bus 002 Device 002: ID 0781:5584 SanDisk Corp.
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 04f3:21d4 Elan Microelectronics Corp.
Bus 001 Device 002: ID 8087:0a2b Intel Corp.
Bus 001 Device 004: ID 1bcf:2b95 Sunplus Innovation Technology Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Looking for general help as to if I can get the Dell Precision 5510-5520s to register into FOG.
I can get boot from the nic just fine but before it boots into the FOG UI it hangs. I can get the Dell latitudes to boot just fine but not the precisions that require a LAN adaptor. Any ideas would be helpful.

Our FOG is on 1.4.4 with kernel 4.11.0.