Posts made by mary montesanto

@Sebastian-Roth
I have 70 same model PCs and same SSDs. The PCs were purchased at the same time and were configured on the same day.

@Sebastian-Roth

I’m relieved for the answer, that’s better.
Thanks for your help

@Sebastian-Roth

Yes, Right

@Sebastian-Roth

The problem with the image I posted is not on all the machines but only on 4.
I wrote to Lenovo, brand of the machines that had the problem, they sent me 4 new SSDs to replace the 4 PCs that have this error, because, as you said in the first post is a hardware problem.
To me, however, a doubt has arisen if it was a problem derived from formatting with FOG, because the clients have SSDs.

@Sebastian-Roth
Template SSD_ASM 256G, M, 2, 2280, PCIe3x4, SAM, OPAL

The problem is not on all the machines currently but only on 4 and the lenovo has sent me back 4 SSDs.

SSD_ASM 256G, M, 2, 2280, PCIe3x4,SAM,OPAL

@Sebastian-Roth said in Error deploy print_req_error: critical medium error, dev nvme0n1 sector...:

Fairly sure this a disk hardware error or maybe a problem with the cable connection. Not much we can do for you here.

Thanks anyway, it’s 4 PCs that break like this. A curiosity, the image upload on an SSD disk and the deployment has different configurations than the old hardisk?

FOG version: 1.5.5

Client operating system: Windows 10

During the deployment phase, the client PC returns the error in question and attached. Help me, please!

@george1421

advice to update the Lenovo Bios? What is the client PC?

@Sebastian-Roth said in ERROR #16 IRQPOLL:

irqpoll

Thanks it 's ok!!! Solved!!!

“Have you tried setting irqpoll as Kernel Argument in the host’s settings?”

No, I do not know how do you have any links to show me?

@george1421 said in ERROR #16 IRQPOLL:

What version of FOG?

1.5.4

What is the make and model of the target computer that was being imaged?

Lenovo ThinkCentre M710q windows 10

Where you capturing or deploying when this error happened?

Deploying

Does this error actually stop imaging or is it just a reported error?

It do this error and stop imaging

Do you get the same results on a different computer of the same make and model?

Yes,I have the same results on a different computer of the same make and model

What type of storage device is this? (hard drive, ssd, nvme,etc??)?

The computer destination is SSD

Thanks

Hi,

I found the error that I am attaching during the deployment phase
I ask for help…!!!

The version ubuntu is 14.04 lts

[quote=“Tom Elliott, post: 45608, member: 7271”]What version of fog? Based on the messages, I’m going to guess 1.2.0.
Yes 1.2.0
Do you have a DNSAddress specified in the FOG Settings?[/quote]

Yes

hi!
when run clamav on the client windows, the client display these errors:
why?

[url=“/_imported_xf_attachments/1/1876_20150416_102150[1].jpg?:”]20150416_102150[1].jpg[/url][url=“/_imported_xf_attachments/1/1877_20150416_102153[1].jpg?:”]20150416_102153[1].jpg[/url][url=“/_imported_xf_attachments/1/1878_20150416_102158[1].jpg?:”]20150416_102158[1].jpg[/url][url=“/_imported_xf_attachments/1/1879_20150416_102204[1].jpg?:”]20150416_102204[1].jpg[/url]

the new version 1.2.0 the old [SIZE=5][COLOR=#212121]maybe 0.32 no remember[/COLOR][/SIZE]

[quote=“Uncle Frank, post: 43646, member: 28116”]What kind of PC do you try to run it on? Model? 32 or 64 bit CPU? Can you run memtest on other clients? Can FOG image/deploy this client??[/quote]

All clients are 32 bit CPU and Fog can image/deploy in the client. I run memetest on other clients too. Memtest run before the last version of fog, now it don’t run with the new version

hi, I tried to launch memtest86 from Fog 1.2.0 to use it on a computer, but when I restarted the PC, to launch memtest, a blue screen was shown. what is the problem?

[url=“/_imported_xf_attachments/1/1778_20150311_100329[1].jpg?:”]20150311_100329[1].jpg[/url]