Helo i solved my problem following this awesome tutorial:
I had many problems becouse of i tried to use ubuntu 14.04 now i’m using ubuntu 10.04 and it is working well.
I had problems configuring my mikrotik dhcp server, becouse i was trying to configure the options 66 and 67 manualy, there are specifc filds in it to configure these options, in the picture below i show the right filds:
[IMG]https://dl.dropboxusercontent.com/u/70915108/dhcp_fog_mikrotik.jpg[/IMG]
Here is my configurations:
[IMG]https://dl.dropboxusercontent.com/u/70915108/dhcp_fog_mikrotik.jpg[/IMG]
I found the problem in the mikrotik you cant use the options 66 and 67 there are specific filds to configure this options in the setings DHCP > Network, i will upload more datails soon and an image.
I tried with the ip and get the same error.
When i disabled the windows firewall it works very well with ip or dns, i didnt’t think this because i’m geting errors with pxe.
There are just switches between them, but i tried behind a router and it worked too with the firewall disabled.
my dhcp is served by a mikrotik the configuration ar the folowing:
options:
name Code value
boot-file 67 undionly.kpxe
next-server 66 fogserver
i configurate the next-server parameter too
In the pxe boot i get this error:
[I][SIZE=12px]Hello[/SIZE][/I]
[I][SIZE=12px]i’m trying to make the install but i’m having a lot of troble with the tftp, if i’m in the fog server i can test the transference successful with this command:[/SIZE][/I]
[I][SIZE=12px]tftp -v ds.feb.br -c get undionly.kpxe[/SIZE][/I]
[I][SIZE=12px]but when i try to do the same from a host i get a time out i already tried two tftp clients for windows and get time out from both, i can connect to the fog and ping it but not use tftp.[/SIZE][/I]
[I][SIZE=12px]I already tried to disable ufw and i get the same error.[/SIZE][/I]
[I][SIZE=12px]I’m using Ubuntu server 10.04.4[/SIZE][/I]
Hello
i’m trying to make the install but i’m having a lot of troble with the tftp, if i’m in the fog server i can test the transference successful with this command:
tftp -v ds.feb.br -c get undionly.kpxe
but when i try to do the same from a host i get a time out i already tried two tftp clients for windows and get time out from both, i can connect to the fog and ping it but not use tftp.
I already tried to disable ufw and i get the same error.
I’m using Ubuntu server 10.04.4
Now something came to my mind, i’m using supernetting in this network, my network is 172.16.8.0/21, the pxe protocol supports supernetting?
[quote=“Jaymes Driver, post: 29423, member: 3582”]Is this a type-o or did you really enter your ip address as 172.16. 8.1 because there is a space in there.[/quote]
It was entered correctly in the configuration the space appered when i copied it in the terminal
i’m using a mikrotik as router and dhcp server for this network segment and my fog server and host machines are geting dhcp from it.
I already tried: undionly.kpxe and have the same problem
here follows my instalation process
..#######:. ..,#,.. .::##::.
.:###### .:;####:…;#;…
…##… …##;,;##::::.##…
,# …##…##:::## …::
## .::###,##. . ##.::#.:######::.
…##:::###::…#. … .#…#. #…#:::.
…:####:… …##…##::## … #
# . …##:,;##;:::#: … ##…
.# . .:;####;::::.##:::;#:…
# …:;###…
###########################################
###########################################
Version: 1.0.1 Installer/Updater
What version of Linux would you like to run the installation for?
1) Redhat Based Linux (Redhat, CentOS)
2) Debian Based Linux (Debian, Ubuntu, Kubuntu, Edubuntu)
Choice: [2]
Starting Debian / Ubuntu / Kubuntu / Edubuntu Installtion.
FOG Server installation modes:
* Normal Server: (Choice N)
This is the typical installation type and
will install all FOG components for you on this
machine. Pick this option if you are unsure what to pick.
* Storage Node: (Choice S)
This install mode will only install the software required
to make this server act as a node in a storage group
More information:
[url]http://www.fogproject.org/wiki/index.php?title=InstallationModes[/url]
What type of installation would you like to do? [N]
What is the IP address to be used by this FOG Server? [end.:]172.16.8.2
Would you like to setup a router address for the DHCP server? [Y/n] 172.16.8.1
Invalid input, please try again.
Would you like to setup a router address for the DHCP server? [Y/n] y
What is the IP address to be used for the router on the DHCP server? []172.16. 8.1
Would you like to setup a DNS address for the DHCP server and client boot imag e? [Y/n] y
What is the IP address to be used for DNS on the DHCP server and client boot i mage? [172.16.0.106]
Would you like to change the default network interface from eth0?
If you are not sure, select No. [y/N]y
What network interface would you like to use? p4p1
Would you like to use the FOG server for DHCP service? [Y/n] n
This version of FOG has internationalization support, would
you like to install the additional language packs? [y/N] n
Would you like to donate computer resources to the FOG Project
to mine cryptocurrency? This will only take place during active
tasks and should NOT have any impact on performance of your
imaging or other tasks. The currency will be used to pay for
FOG Project expenses and to support the core developers working
on the project. For more information see:
[url]http://fogproject.org/?q=cryptocurrency[/url]
Would you like to donate computer resources to the FOG Project? [y/N] n
#####################################################################
FOG now has everything it needs to setup your server, but please
understand that this script will overwrite any setting you may
have setup for services like DHCP, apache, pxe, tftp, and NFS.
It is not recommended that you install this on a production system
as this script modifies many of your system settings.
This script should be run by the root user on Redhat or with sudo on Ubuntu.
** Notice ** Redhat users will need to disable SELinux and iptables in
order to use FOG
Please see our wiki for more information at [url]http://www.fogproject.org/wiki[/url]
Here are the settings FOG will use:
Base Linux: Debian
Detected Linux Distribution: Ubuntu
Installation Type: Normal Server
Server IP Address: 172.16.8.2
DHCP router Address: 172.16.8.1
DHCP DNS Address: 172.16.0.106
Interface: p4p1
Using FOG DHCP: 0
Internationalization: 0
Donate: 0
DHCP will NOT be setup but you must setup your
current DHCP server to use FOG for PXE services.
On a Linux DHCP server you must set:
next-server
On a Windows DHCP server you must set:
option 066 & 067
Option 066 is the IP of the FOG Server: (e.g.
Option 067 is the undionly.kpxe file: (e.g. undionly.kpxe)
Are you sure you wish to continue (Y/N) y
Hello i instaled the fog version 1.0.1 yesterday and tried to configure it with my existing mikrotik dhcp server.
The fog is on the same netowork as my host machines, in the dhcp server i created the 66 and 67 options as follows:
Name Code Value
next-server 66 172.16.8.2
bootfile 67 pxelinux.0
but my host machines give me a message that no configuration are recieved from dhcp, is there any other option that i have to create?
When i installed fog i choose no when it prompt for it to be the dhcp server.